RS6-2760-000CN printer parts diagram.

12
 

RS6-2760-000CN is represented by #7 in the diagram below.

250 Sheet Tray - Center Frame Assembly
RS6-2760-000CN is represented by #7 in the diagram below.
  • 2
    • 2 RB3-0105-020CN - Center support frame (black plastic) - Support structure for the paper pickup roller, feed roller, and paper sensors
  • 3
    • 3 RB3-0165-000CN - Top inner cover (black plastic) - Covers the back half of the pressure roller arms and springs
  • 4
    • 4 RB3-0166-000CN - Bottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side
  • 6
    • 6 RS7-0430-000CN - 26 tooth gear - White gear with 1/8th portion of gear cut away and pin for spring tensioning
  • 10
    • 10 RB2-2843-000CN - Torsion spring - Provides a small amount of back pressure for the paper sensor flag. (Flag sold separately RB2-6264-000CN).
  • 11
    • 11 RB2-2892-000CN - Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller
    • 11 RB2-2892-000CN - Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller
  • 12
    • 12 RB2-2895-000CN - Shaft bushing/retainer - Right side pickup roller support bushing
  • 13
    • 13 RB2-2896-000CN - Shaft bushing/retainer - Left side pickup roller support bushing
  • 16
    • 16 RB3-0129-000CN - Feed roller assembly - Includes the metal shaft and two small rubber rollers
    • 16 RB3-0129-020CN - Feed roller assembly - Includes the metal shaft and two small rubber rollers - Feeds paper from the paper cassette (or tray three below) into the printer - Mounts on the top of the center frame in the base on the 250-sheet input tray assembly
  • 17
    • 17 WG8-5382-000CN - Sensor PC board - Small board with flag activated photosensor
    • 17 WG8-5382-000CN - Sensor PC board - Small board with flag activated photosensor
    • 17 WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
    • 17 WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
  • 22
    • 22 RB3-0161-000CN - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft
  • 23
    • 23 RF5-4035-000CN - Pressure roller and arm assembly - Includes the small white roller, the holding arm, and roller scraper
1
RB1-2190-000CN Hook Pickup roller spring hook
2
RB3-0105-020CN Frame Center support frame (black plastic) - Support structure for the paper pickup roller, feed roller, and paper sensors
3
RB3-0165-000CN Cover Top inner cover (black plastic) - Covers the back half of the pressure roller arms and springs
4
RB3-0166-000CN Cover Bottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side
5
RS7-0431-000CN Gear 15 tooth Gear (white plastic)
6
RS7-0430-000CN Gear 26 tooth gear - White gear with 1/8th portion of gear cut away and pin for spring tensioning
7
RS6-2760-000CN Spring Compression spring
8
RS6-2025-000CN Spring Tensioning spring
9
RS5-1636-000CN Bushing Shaft bushing for HP Color LaserJet 2820 Series
10
RB2-2843-000CN Spring Torsion spring - Provides a small amount of back pressure for the paper sensor flag. (Flag sold separately RB2-6264-000CN).
11
RB2-2892-000CN Roller Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller
11
RB2-2892-000CN Roller Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller
12
RB2-2895-000CN Bushing Shaft bushing/retainer - Right side pickup roller support bushing
13
RB2-2896-000CN Bushing Shaft bushing/retainer - Left side pickup roller support bushing
14
RB2-2897-000CN Bushing Shaft bushing/retainer
14
RB2-2897-020CN Bushing Shaft bushing/retainer
15
RS5-1638-000CN Bushing Bushing for HP Color LaserJet 1500 Series
16
RB3-0129-000CN Roller Feed roller assembly - Includes the metal shaft and two small rubber rollers
16
RB3-0129-020CN Roller Feed roller assembly - Includes the metal shaft and two small rubber rollers - Feeds paper from the paper cassette (or tray three below) into the printer - Mounts on the top of the center frame in the base on the 250-sheet input tray assembly
17
WG8-5382-000CN PC Board Sensor PC board - Small board with flag activated photosensor
17
WG8-5382-000CN PC Board Sensor PC board - Small board with flag activated photosensor
17
WG8-5593-000CN PC Board Sensor PC board - Small board with flag activated photosensor
17
WG8-5593-000CN PC Board Sensor PC board - Small board with flag activated photosensor
18
RB3-0130-000CN Flag Shaft mounted sensor flag (black plastic)
19
RB3-0132-000CN Flag Mechanical sensor flag (black plastic)
20
RB3-0136-020CN Shield Solenoid cover/magnetic shield
21
RB3-0137-000CN Ground Grounding plate
22
RB3-0161-000CN Roller Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft
23
RF5-4035-000CN Roller Pressure roller and arm assembly - Includes the small white roller, the holding arm, and roller scraper
24
RH7-5341-000CN Solenoid Solenoid assembly
24
RH7-5347-000CN Solenoid Solenoid assembly
24
RH7-5385-000CN Solenoid Solenoid assembly - Tray 3 (SL95)
25
XD9-0136-000CN Clip Retaining E-ring
25
XD9-0233-000CN Clip Retaining E-ring
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.