RM1-3741-030CN printer parts diagram.

12
 

RM1-3741-030CN is represented by #18 in the diagram below.

Internal components
RM1-3741-030CN is represented by #18 in the diagram below.
  • 1
    • 1 RK2-1490-000CN - Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly.
  • 3
    • 3 RM1-1485-000CN - Roller assembly - Black plastic housing that holds rollers in front of Tray 2 pickup roller assembly
  • 4
    • 4 RU5-2386-000CN - Torsion spring - Provides tension for Tray 1 paper sensor flag
  • 6
    • 6 RC2-0593-000CN - Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction.
  • 9
    • 9 XA9-1503-000CN - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
  • 10
    • 10 WT2-5678-000CN - Cable clip - White plastic push-in clip with mounting pin
  • 11
    • 11 RM1-4041-000CN - Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3)
  • 12
    • 12 RC2-0592-000CN - Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer.
  • 13
    • 13 RK2-1497-000CN - Cooling fan - Located on the right side of the printer.
  • 14
    • 14 RC1-3939-000CN - Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor
  • 15
    • 15 RC1-4083-000CN - Papre guide - Paper guide under registration roller assembly
  • 16
    • 16 5851-4012 - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
    • 16 RM1-3762-000CN - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
  • 17
    • 17 RM1-3717-000CN - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
    • 17 RM1-3740-000CN - Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation
    • 17 RM1-3740-030CN - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat
  • 18
    • 18 5851-3997 - Kit-220V Fuser maint LJP300x/LJ30xx MFP
    • 18 RM1-3741-000CN - Fuser Assembly - For 220 VAC to 240 VAC, 50Hz operation - Bonds toner to paper by heat
    • 18 RM1-3741-030CN - Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
    • 18 RM1-3761-000CN - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear
    • 18 RM1-3761-020CN - Fuser assembly - For 220 VAC - Bonds toner to paper with heat
  • 19
    • 19 RM1-3712-000CN - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly.
  • 20
    • 20 RC2-0739-000CN - Sensor cable cover - Plastic cover that protects the face up sensor cable
1
RK2-1490-000CN Solenoid Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly.
2
RM1-3714-000CN Gear Gear - Pick up roller gear assembly
3
RM1-1485-000CN Roller Roller assembly - Black plastic housing that holds rollers in front of Tray 2 pickup roller assembly
4
RU5-2386-000CN Spring Torsion spring - Provides tension for Tray 1 paper sensor flag
5
RC2-0588-000CN Holder Cable holder - Mounts on the main drive assembly.
6
RC2-0593-000CN Rod Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction.
7
XA9-1671-000CN Screw Screw - M3 X 8mm long
7
XA9-1671-000CN Screw Screw - M3 X 8mm long
8
WT2-5694-000CN Clamp Snap-in cable clamp
9
XA9-1503-000CN Screw M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
10
WT2-5678-000CN Clip Cable clip - White plastic push-in clip with mounting pin
11
RM1-4041-000CN Sensor Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3)
12
RC2-0592-000CN Holder Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer.
13
RK2-1497-000CN Fan Cooling fan - Located on the right side of the printer.
14
RC1-3939-000CN Lever Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor
15
RC1-4083-000CN Guide Papre guide - Paper guide under registration roller assembly
16
5851-4012 Pickup Assembly Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
16
RM1-3762-000CN Pickup Assembly Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
17
RM1-3717-000CN Fuser Assembly Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
17
RM1-3740-000CN Fuser Assembly Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation
17
RM1-3740-030CN Fuser Assembly Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat
18
5851-3997 Service Parts Kit-220V Fuser maint LJP300x/LJ30xx MFP
18
RM1-3741-000CN Fuser Assembly Fuser Assembly - For 220 VAC to 240 VAC, 50Hz operation - Bonds toner to paper by heat
18
RM1-3741-030CN Fuser Assembly Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
18
RM1-3761-000cn Fuser Assembly Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear
18
RM1-3761-020CN Fuser Assembly Fuser assembly - For 220 VAC - Bonds toner to paper with heat
19
RM1-3712-000CN Drive Assembly Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly.
20
RC2-0739-000CN Cover Sensor cable cover - Plastic cover that protects the face up sensor cable
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.