RM1-2605-000CN printer parts diagram.

12
 

RM1-2605-000CN is represented by #20 in the diagram below.

Internal Components
RM1-2605-000CN is represented by #20 in the diagram below.
  • 1
    • 1 RC1-6652-000CN - Drawer connector holder - This is the connector holder for Tray 3, where the electrical connections are made between the printer and Tray 3 - Black plastic
  • 2
    • 2 RC1-6653-000CN - Drawer holder - Sheet metal piece that holds the connector for the fuser - Left side of printer
  • 4
    • 4 RC1-6700-000CN - Switch link arm - Connects the on/off switch on the right side door to the actual switch on the LVPS - Metal rod link
  • 5
    • 5 RC1-6772-000CN - Flat cable guide - Located on the bottom of the printer and help guide flat cables from the Driver PCA, Memory board, and the Tray 2 media sensor up to the DC Controller PCA - This is the guide on the right rear side of printer
  • 6
    • 6 RC1-6773-000CN - Flat cable guide - Located on the bottom of the printer and help guide flat cables from the Driver PCA, Memory board, and the Tray 2 media sensor up to the DC Controller PCA - This is the guide on the left rear side of printer
  • 9
    • 9 RC1-6825-000CN - Cable guard - Protects the cables (non-flat type) from being pinched between PC boards and sheet metal on upper left side of printer
  • 10
    • 10 RC1-7551-000CN - Left rear bracket - This is the sheet metal box that supports the Low Voltage Power Supply so the top cover fits
  • 11
    • 11 WP2-5214-000CN - Temperature sensor - Also referred to as environment sensor
  • 12
    • 12 RM1-2595-000CN - Temperature sensor cable - Connects environment sensor to DC controller board
  • 13
    • 13 RM1-2608-000CN - Electrostatic Transfer Belt (ETB) cable - Connects Driver PC board to ETB
  • 14
    • 14 RM1-2610-000CN - Drum motor cable - Connects cartridge drive motors M6 and M7 to Driver PCA
  • 15
    • 15 RM1-2611-000CN - Solenoid and motor cable - Connects CST pickup and MP Tray pickup solenoids to Driver PCA - Also connects feed motor M4 to Driver PCA
  • 16
    • 16 RM1-2613-000CN - Cassette feeder cable - Connects Driver PCA to 500 sheet paper feeder PCA
  • 17
    • 17 RM1-2614-000CN - Drum motor cable - Connects cartridge drive motors M8 and M9 to Driver PCA - For Color LaserJet 3600/3800/Cp3505 series
  • 18
    • 18 RM1-2628-000CN - Paper full cable - From Driver PCA to connector J821
  • 19
    • 19 RM1-2597-000CN - Fuser cable - Connects Fuser to DC controller and Low Voltage power supply
  • 20
    • 20 RM1-2605-000CN - Driver cable - From DC Controller board to Driver board
  • 21
    • 21 RM1-2640-000CN - Laser/scanner assembly - For Color LaserJet 3600/3800/CP3505 series
    • 21 RM1-6338-000CN - Laser/scanner assembly - For Color LaserJet 3600/3800/CP3505 series
1
RC1-6652-000CN Holder Drawer connector holder - This is the connector holder for Tray 3, where the electrical connections are made between the printer and Tray 3 - Black plastic
2
RC1-6653-000CN Holder Drawer holder - Sheet metal piece that holds the connector for the fuser - Left side of printer
4
RC1-6700-000CN Link Switch link arm - Connects the on/off switch on the right side door to the actual switch on the LVPS - Metal rod link
5
RC1-6772-000CN Guide Flat cable guide - Located on the bottom of the printer and help guide flat cables from the Driver PCA, Memory board, and the Tray 2 media sensor up to the DC Controller PCA - This is the guide on the right rear side of printer
6
RC1-6773-000CN Guide Flat cable guide - Located on the bottom of the printer and help guide flat cables from the Driver PCA, Memory board, and the Tray 2 media sensor up to the DC Controller PCA - This is the guide on the left rear side of printer
9
RC1-6825-000CN Guard Cable guard - Protects the cables (non-flat type) from being pinched between PC boards and sheet metal on upper left side of printer
10
RC1-7551-000CN Bracket Left rear bracket - This is the sheet metal box that supports the Low Voltage Power Supply so the top cover fits
11
WP2-5214-000CN Sensor Temperature sensor - Also referred to as environment sensor
12
RM1-2595-000CN Cable Temperature sensor cable - Connects environment sensor to DC controller board
13
RM1-2608-000CN Cable Electrostatic Transfer Belt (ETB) cable - Connects Driver PC board to ETB
14
RM1-2610-000CN Cable Drum motor cable - Connects cartridge drive motors M6 and M7 to Driver PCA
15
RM1-2611-000CN Cable Solenoid and motor cable - Connects CST pickup and MP Tray pickup solenoids to Driver PCA - Also connects feed motor M4 to Driver PCA
16
RM1-2613-000CN Cable Cassette feeder cable - Connects Driver PCA to 500 sheet paper feeder PCA
17
RM1-2614-000CN Cable Drum motor cable - Connects cartridge drive motors M8 and M9 to Driver PCA - For Color LaserJet 3600/3800/Cp3505 series
18
RM1-2628-000CN Cable Paper full cable - From Driver PCA to connector J821
19
RM1-2597-000CN Cable Fuser cable - Connects Fuser to DC controller and Low Voltage power supply
20
RM1-2605-000CN Cable Driver cable - From DC Controller board to Driver board
21
RM1-2640-000CN Laser Scanner Laser/scanner assembly - For Color LaserJet 3600/3800/CP3505 series
21
RM1-6338-000CN Laser Scanner Laser/scanner assembly - For Color LaserJet 3600/3800/CP3505 series
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.