RM1-1497-000CN printer parts diagram.

12
 

RM1-1497-000CN is represented by #29 in the diagram below.

Internal components
RM1-1497-000CN is represented by #29 in the diagram below.
  • 1
    • 1 RC2-0631-000CN - Power on/off switch - Located on the front right side of the printer.
  • 3
    • 3 WT2-5678-000CN - Cable clip - White plastic push-in clip with mounting pin
  • 8
    • 8 RC2-0559-000CN - Cassette guide - Right side guide for media cassette.
  • 10
    • 10 RC2-0700-000CN - Cartridge guide - Lower right side toner cartridge guide.
  • 11
    • 11 RC2-0702-000CN - Right cartridge stopper - Provided a predetermined position for the cartridge.
  • 12
    • 12 VS1-7257-007CN - Drawer connector - Connector located on top of tray assembly frame (right side) which connects tray assemblies to each other
  • 22
    • 22 RC1-3665-000CN - Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frame
  • 23
    • 23 RC1-3994-000CN - Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used
  • 24
    • 24 RC2-0665-000CN - Torsion spring - Tiny spring that attaches the face down roller.
  • 26
    • 26 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
  • 27
    • 27 RK2-1492-000CN - Solenoid (SL2) - For tray 2 - Mounts on the main drive assembly
  • 29
    • 29 RM1-1497-000CN - Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used
  • 30
    • 30 RM1-1497-000CN - Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used
  • 31
    • 31 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 32
    • 32 RC2-0633-000CN - Link switch - Metal arm that links power switch to power supply.
  • 33
    • 33 RC2-0634-000CN - Link switch holder - Plastic guide that holds power link arm in place.
  • 34
    • 34 RC2-0595-000CN - Holder - Plastic assembly that holds interlock switch for cover.
  • 35
    • 35 RC2-0492-000CN - Cartridge guide - Right side toner cartridge guide
  • 37
    • 37 RC2-0562-000CN - Holder - Plastic assembly that holds optional input connector.
  • 38
    • 38 RM1-3749-000CN - Face-down output roller assembly - Black roller shaft with four soft rollers.
1
RC2-0631-000CN Button Power on/off switch - Located on the front right side of the printer.
2
RC2-0632-000CN Holder Switch holder - Holds the power on/off switch.
3
WT2-5678-000CN Clip Cable clip - White plastic push-in clip with mounting pin
4
RM1-3727-000CN Plate Bottom support plate for the roller assembly
5
RK2-0534-000CN Switch Microswitch - Door open switch - SW501
6
RA0-1003-000CN Foot Rubber foot - For bottom of printer - Three used
7
RC2-0498-000CN Solenoid Mount solenoid for HP HP LaserJet M3027 MFP
8
RC2-0559-000CN Guide Cassette guide - Right side guide for media cassette.
9
RC2-0560-000CN Guide Cassette guide - Right rear side cassette guide.
10
RC2-0700-000CN Guide Cartridge guide - Lower right side toner cartridge guide.
11
RC2-0702-000CN Stop Right cartridge stopper - Provided a predetermined position for the cartridge.
12
VS1-7257-007CN Connector Drawer connector - Connector located on top of tray assembly frame (right side) which connects tray assemblies to each other
13
XA9-1671-000CN Screw Screw - M3 X 8mm long
14
XA9-1671-000CN Screw Screw - M3 X 8mm long
15
XA9-1671-000CN Screw Screw - M3 X 8mm long
16
XA9-1671-000CN Screw Screw - M3 X 8mm long
17
XA9-1671-000CN Screw Screw - M3 X 8mm long
18
XA9-1671-000CN Screw Screw - M3 X 8mm long
19
XA9-1671-000CN Screw Screw - M3 X 8mm long
20
XA9-1671-000CN Screw Screw - M3 X 8mm long
21
XA9-1671-000CN Screw Screw - M3 X 8mm long
22
RC1-3665-000CN Bushing Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frame
23
RC1-3994-000CN Roller Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used
24
RC2-0665-000CN Spring Torsion spring - Tiny spring that attaches the face down roller.
25
RC2-0697-000CN Plate Plate face-up shield
26
WG8-5624-000CN Sensor Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
27
RK2-1492-000CN Solenoid Solenoid (SL2) - For tray 2 - Mounts on the main drive assembly
28
RM1-4062-000CN Cable Option input tray cable
29
RM1-1497-000CN Roller Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used
30
RM1-1497-000CN Roller Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used
31
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
32
RC2-0633-000CN Link Link switch - Metal arm that links power switch to power supply.
33
RC2-0634-000CN Holder Link switch holder - Plastic guide that holds power link arm in place.
34
RC2-0595-000CN Holder Holder - Plastic assembly that holds interlock switch for cover.
35
RC2-0492-000CN Guide Cartridge guide - Right side toner cartridge guide
36
RC2-0561-000CN Guide Right center side plate guide
37
RC2-0562-000CN Holder Holder - Plastic assembly that holds optional input connector.
38
RM1-3749-000CN Roller Face-down output roller assembly - Black roller shaft with four soft rollers.
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.