RH7-1486-000CN printer parts diagram.

12345
 

RH7-1486-000CN is represented by #14 in the diagram below.

ADF scanner assembly
RH7-1486-000CN is represented by #14 in the diagram below.
  • 1
    • 1 RB2-8678-000CN - Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board
  • 2
    • 2 RB2-8040-000CN - Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly
  • 3
    • 3 RB2-8046-000CN - Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 4
    • 4 RB2-8047-000CN - Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 5
    • 5 RB2-8048-000CN - ADF assembly front cover - Mounts on the end of the ADF main assembly structure
  • 6
    • 6 RB2-8681-000CN - Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 7
    • 7 RB2-8682-000CN - Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 8
    • 8 RB2-8693-000CN - ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism
  • 9
    • 9 RF5-3850-000CN - ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly
  • 10
    • 10 RH2-5456-000CN - Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
  • 11
    • 11 RG5-6274-000CN - ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)
  • 12
    • 12 RH5-3078-000CN - ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assemby towards the center rear
    • 12 RH5-3078-030CN - ADF intermediate PC board - Has four cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear
  • 13
    • 13 RG5-6311-000CN - Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly
  • 14
    • 14 RH7-1486-000CN - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
    • 14 RH7-1486-020CN - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
  • 15
    • 15 RG5-6313-000CN - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
    • 15 RG5-6313-030CN - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 16
    • 16 RB2-7943-000CN - Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
  • 17
    • 17 WG8-5362-000CN - Photo-sensor (TLP1241) - Sensor flag activated.
    • 17 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
  • 18
    • 18 RF5-3682-000CN - Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
  • 19
    • 19 RF5-3698-000CN - Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
  • 20
    • 20 RB2-7939-000CN - Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
    • 20 RB2-7939-000CN - Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
1
RB2-8678-000CN Ferrite Assembly Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board
2
RB2-8040-000CN Cover Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly
3
RB2-8046-000CN Guide Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
4
RB2-8047-000CN Guide Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
5
RB2-8048-000CN Cover ADF assembly front cover - Mounts on the end of the ADF main assembly structure
6
RB2-8681-000CN Guide Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
7
RB2-8682-000CN Guide Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
8
RB2-8693-000CN Holder ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism
9
RF5-3850-000CN Filter ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly
10
RH2-5456-000CN Cable Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
11
RG5-6274-000CN Sensor ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)
12
RH5-3078-000CN PC Board ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assemby towards the center rear
12
RH5-3078-030CN PC Board ADF intermediate PC board - Has four cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear
13
RG5-6311-000CN Guide Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly
14
RH7-1486-000CN Fan ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
14
RH7-1486-020CN Fan ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
15
RG5-6313-000CN Guide Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
15
RG5-6313-030CN Guide Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
16
RB2-7943-000CN Lever Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
17
WG8-5362-000CN Shaft Photo-sensor (TLP1241) - Sensor flag activated.
17
WG8-5624-000CN Sensor Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
18
RF5-3682-000CN Guide Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
19
RF5-3698-000CN Guide Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
20
RB2-7939-000CN Arm Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
20
RB2-7939-000CN Arm Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
12345
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.