RG5-6272-050CN printer parts diagram.

RG5-6272-050CN is represented by #17 in the diagram below.

• 1
  • 1 RB2-8048-000CN - ADF assembly front cover - Mounts on the end of the ADF main assembly structure

• 2
  • 2 RB2-8040-000CN - Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly

• 3
  • 3 RB2-8678-000CN - Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board

• 4
  • 4 RH2-5456-000CN - Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly

• 5
  • 5 RG5-6311-000CN - Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly

• 6
  • 6 RG5-6312-000CN - ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly
  • 6 RG5-6312-030CN - ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly

• 7
  • 7 RH7-1486-000CN - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
  • 7 RH7-1486-020CN - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly

• 8
  • 8 RG5-6313-000CN - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 8 RG5-6313-030CN - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly

• 9
  • 9 RB2-8682-000CN - Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
  • 9 RB2-8682-000CN - Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly

• 10
  • 10 RB2-8047-000CN - Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly

• 11
  • 11 RB2-8046-000CN - Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly

• 12
  • 12 RB2-8681-000CN - Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly

• 14
  • 14 RH5-3078-000CN - ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assemby towards the center rear
  • 14 RH5-3078-030CN - ADF intermediate PC board - Has four cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear

• 15
  • 15 RB2-7943-000CN - Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)

• 16
  • 16 WG8-5362-000CN - Photo-sensor (TLP1241) - Sensor flag activated.
  • 16 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated

• 17
  • 17 RG5-6272-000CN - ADF base cover assembly - Bottom half of ADF assembly that sits on top of flatbed scanner
  • 17 RG5-6272-050CN - ADF base cover assembly - Includes the large bottom rectangular support cover for the ADF assembly with front and rear tray guides, the ADF intermediate PC board, cables, sensors, and hinges

• 18
  • 18 RG5-6274-000CN - ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)

• 19
  • 19 RB2-7939-000CN - Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)

• 20
  • 20 RF5-3698-000CN - Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly

• 21
  • 21 RB2-8693-000CN - ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism

• 22
  • 22 RF5-3850-000CN - ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly