RC2-0628-000CN printer parts diagram.

RC2-0628-000CN is represented by #20 in the diagram below.

• 1
  • 1 RK2-1490-000CN - Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly.

• 2
  • 2 RM1-3714-000CN - Gear - Pick up roller gear assembly

• 3
  • 3 RM1-1485-000CN - Roller assembly - Black plastic housing that holds rollers in front of Tray 2 pickup roller assembly

• 4
  • 4 RU5-2386-000CN - Torsion spring - Provides tension for Tray 1 paper sensor flag

• 5
  • 5 RC2-0638-000CN - I/O face plate - Mounts on the formatter board cover (non-network models)

• 6
  • 6 RC2-0593-000CN - Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction.

• 7
  • 7 RK2-1497-000CN - Cooling fan - Located on the right side of the printer.

• 8
  • 8 XA9-1671-000CN - Screw - M3 X 8mm long
  • 8 XA9-1671-000CN - Screw - M3 X 8mm long

• 9
  • 9 XA9-1671-000CN - Screw - M3 X 8mm long

• 11
  • 11 XA9-1671-000CN - Screw - M3 X 8mm long

• 12
  • 12 XA9-1671-000CN - Screw - M3 X 8mm long

• 13
  • 13 RC1-3939-000CN - Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor

• 14
  • 14 WT2-5694-000CN - Snap-in cable clamp

• 15
  • 15 RC2-0588-000CN - Cable holder - Mounts on the main drive assembly.

• 16
  • 16 XA9-1503-000CN - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long

• 17
  • 17 RM1-4041-000CN - Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3)

• 18
  • 18 WT2-5678-000CN - Cable clip - White plastic push-in clip with mounting pin

• 19
  • 19 RC2-0627-000CN - Formatter cover - Mounts on the left back side of the printer

• 20
  • 20 RC2-0628-000CN - Anti-magnetic plate - Located on the formatter cover

• 21
  • 21 RC2-0592-000CN - Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer.

• 22
  • 22 RC1-4083-000CN - Papre guide - Paper guide under registration roller assembly

• 23
  • 23 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates

• 24
  • 24 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates

• 25
  • 25 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates

• 26
  • 26 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates

• 27
  • 27 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates

• 28
  • 28 XB2-7300-605CN - Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal

• 31
  • 31 RM1-3730-000CN - Engine controller assembly - Engine controller PC board and metal pan - 110VAC/127VAC
  • 31 RM1-3730-060CN - Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
  • 31 RM1-3731-000CN - PC Board : Engine controller assembly - Engine controller PC board and metal pan - 220VAC/240VAC
  • 31 RM1-3731-060CN - Engine controller assy, Engine controller PC board assembly and metal pan - For 220 VAC to 240 VAC operation

• 32
  • 32 RM1-3712-000CN - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly.

• 33
  • 33 5851-3997 - Kit-220V Fuser maint LJP300x/LJ30xx MFP
  • 33 RM1-3717-000CN - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
  • 33 RM1-3740-030CN - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat
  • 33 RM1-3741-030CN - Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
  • 33 RM1-3761-000CN - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear

• 34
  • 34 5851-4012 - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
  • 34 RM1-3762-000CN - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3