RC2-0590-000CN printer parts diagram.

12
 

RC2-0590-000CN is represented by #38 in the diagram below.

Internal components
RC2-0590-000CN is represented by #38 in the diagram below.
  • 1
    • 1 RC1-4114-000CN - Cam - Located between large white 201 tooth gear and drive release lever
  • 4
    • 4 RC2-0649-000CN - Fuser film drive side plate - Located on the fuser assembly.
  • 5
    • 5 RM1-3748-000CN - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability.
  • 6
    • 6 RC2-0657-000CN - Fuser thrust stopper - Located on the fuser drive assembly.
  • 7
    • 7 RC2-0701-000CN - Inner bushing - Rides on the large white 201-tooth drive gear.
  • 8
    • 8 RK2-1489-000CN - Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly
  • 9
    • 9 RM1-3746-000CN - Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer
  • 11
    • 11 CB414-67923 - Replacement gear kit - Includes 17,17,19 and 20 tooth gears
    • 11 RU5-0956-000CN - Gear - 20/20 tooth - Goes on the fuser drive assembly
  • 12
    • 12 RU5-0957-000CN - Replacement gear kit - Includes 17,17,19 and 20 tooth gears
  • 13
    • 13 RU5-0958-000CN - Replacement gear kit - Includes 17,17,19 and 20 tooth gears
  • 14
    • 14 RU5-0959-000CN - Replacement gear kit - Includes 17,17,19 and 20 tooth gears
  • 15
    • 15 RU5-2401-000CN - Compression spring - Provides pressure for the large 201 tooth white gear on right side of printer
  • 16
    • 16 RU5-0394-000CN - Gear - 12-tooth Gear - Goes on the drive release assembly
  • 17
    • 17 RU5-2920-000CN - Compression spring - Goes on the pendulum assembly
  • 18
    • 18 XD9-0232-000CN - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
  • 26
    • 26 RC1-4108-000CN - Cover for main motor M1 - Located on lower right side of printer
  • 28
    • 28 RK2-1488-000CN - Main motor (M1) - DC motor located on the inner left side of the printer
  • 30
  • 33
    • 33 XD9-0232-000CN - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
  • 34
    • 34 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 37
    • 37 RC1-4115-000CN - Coupling lever - White plastic lever between large white gear cam and drive release assembly
  • 38
    • 38 RC2-0590-000CN - Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area.
  • 41
    • 41 RC2-0579-000CN - Gear cover - Mounts on the left side of the printer chassis.
1
RC1-4114-000CN Cam Cam - Located between large white 201 tooth gear and drive release lever
2
RC1-4116-000CN Lever Drive release lever -
3
RC1-4116-000CN Lever Drive release lever -
4
RC2-0649-000CN Plate Fuser film drive side plate - Located on the fuser assembly.
5
RM1-3748-000CN Gear Assembly Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability.
6
RC2-0657-000CN Gear Fuser thrust stopper - Located on the fuser drive assembly.
7
RC2-0701-000CN Bushing Inner bushing - Rides on the large white 201-tooth drive gear.
8
RK2-1489-000CN Motor Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly
9
RM1-3746-000CN Gear Assembly Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer
10
RU5-0950-000CN Gear Gear - 201-tooth gear
11
CB414-67923 Gear Replacement gear kit - Includes 17,17,19 and 20 tooth gears
11
RU5-0956-000CN Gear Gear - 20/20 tooth - Goes on the fuser drive assembly
12
RU5-0957-000CN Gear Replacement gear kit - Includes 17,17,19 and 20 tooth gears
13
RU5-0958-000CN Gear Replacement gear kit - Includes 17,17,19 and 20 tooth gears
14
RU5-0959-000CN Gear Replacement gear kit - Includes 17,17,19 and 20 tooth gears
15
RU5-2401-000CN Spring Compression spring - Provides pressure for the large 201 tooth white gear on right side of printer
16
RU5-0394-000CN Gear Gear - 12-tooth Gear - Goes on the drive release assembly
17
RU5-2920-000CN Spring Compression spring - Goes on the pendulum assembly
18
XD9-0232-000CN Clip E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
19
XA9-1671-000CN Screw Screw - M3 X 8mm long
20
XA9-1671-000CN Screw Screw - M3 X 8mm long
21
XA9-1671-000CN Screw Screw - M3 X 8mm long
22
XA9-1671-000CN Screw Screw - M3 X 8mm long
23
XA9-1671-000CN Screw Screw - M3 X 8mm long
24
XA9-1671-000CN Screw Screw - M3 X 8mm long
25
XA9-1671-000CN Screw Screw - M3 X 8mm long
26
RC1-4108-000CN Cover Cover for main motor M1 - Located on lower right side of printer
27
RC2-0652-000CN Washer Plain Washer - Located on the pendulum assembly
28
RK2-1488-000CN Motor Main motor (M1) - DC motor located on the inner left side of the printer
29
RU5-0951-000CN Gear Gear - 16-tooth gear
30
RU5-0955-000CN Gear Gear - 42-tooth - Goes with the pendulum assembly
31
RU5-0960-000CN Gear Gear - 31-tooth gear
32
RU5-0962-000CN Gear Gear - 65-tooth gear
33
XD9-0232-000CN Clip E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
34
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
37
RC1-4115-000CN Lever Coupling lever - White plastic lever between large white gear cam and drive release assembly
38
RC2-0590-000CN Duct Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area.
39
RM1-1522-000CN Drive Assembly Drive release assembly -
39
RM1-1522-020CN Drive Assembly Drive release assembly
40
RC2-0648-000CN Guide Air guide - Located next to the cartridge duct.
41
RC2-0579-000CN Cover Gear cover - Mounts on the left side of the printer chassis.
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.