|
|
RC1-2280-000CN is represented by #12 in the diagram below.
500 Sheet Paper Feeder
- 1
- 1 RC1-2178-000CN - Front cover - Plastic piece that cover the space between the bottom of printer and top of the 500-sheet cassette tray assembly
- 2
- 2 RC1-2179-000CN - Right cover - Right side external plastic cover for the 500-sheet paper feeder assembly
- 3
- 3 RC1-2180-000CN - Left cover - Left side external plastic cover for the 500-sheet paper feeder assembly
- 7
- 7 RB2-6452-000CN - Cross-brace (metal plate with stamped in guide pin on left side)
- 7 RB2-6452-000CN - Cross-brace (metal plate with stamped in guide pin on left side)
- 7 RB2-6452-020CN - Cross-brace - Metal plate with stamped in guide pin on left side - Mounts on the bottom of the center support frame (two used) - Adds rigidity to the base assembly structure - For the 500-sheet input tray assembly
- 7 RB2-6452-020CN - Cross-brace - Metal plate with stamped in guide pin on left side - Mounts on the bottom of the center support frame (two used) - Adds rigidity to the base assembly structure - For the 500-sheet input tray assembly
- 8
- 8 RB2-6453-000CN - Inner cover (Small Quartz Gray plastic cover with sensor flag slot)
- 10
- 10 RC1-2182-000CN - Shaft bushing/retainer - Pickup roller support bushing on left side - Mounts on and retains the left end of the pickup roller shaft
- 11
- 11 RC1-2192-000CN - Shaft bushing/retainer - Pickup roller support bushing on right side - Mounts on and retains the right end of the pickup roller shaft
- 12
- 12 RC1-2280-000CN - Leaf spring - Provides ground contact to front cross-brace - Mounts on the on the right side of the center frame assembly
- 14
- 14 RM1-0709-000CN - Pressure roller assembly - Plastic support frame with two small spring loaded rollers - Rolls against the rubber feed roller
- 15
- 15 RM1-0769-000CN - Cable assembly - Connects between the 6-pin printer interface connector and the feed drive board
- 16
- 16 RM1-0770-000CN - Sensor cable assembly - Connects between the paper feed sensor and the feed drive board
- 17
- 17 RM1-0731-040CN - Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
- 17 RM1-0731-050CN - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
- 19
- 19 WG8-5696-000CN - Photo-interrupter sensor assembly (Does not include the sensor flag)
1
RC1-2178-000CN
Cover
Front cover - Plastic piece that cover the space between the bottom of printer and top of the 500-sheet cassette tray assembly
2
RC1-2179-000CN
Cover
Right cover - Right side external plastic cover for the 500-sheet paper feeder assembly
3
RC1-2180-000CN
Cover
Left cover - Left side external plastic cover for the 500-sheet paper feeder assembly
7
RB2-6452-000CN
Cross Brace
Cross-brace (metal plate with stamped in guide pin on left side)
7
RB2-6452-000CN
Cross Brace
Cross-brace (metal plate with stamped in guide pin on left side)
7
RB2-6452-020CN
Cross Brace
Cross-brace - Metal plate with stamped in guide pin on left side - Mounts on the bottom of the center support frame (two used) - Adds rigidity to the base assembly structure - For the 500-sheet input tray assembly
7
RB2-6452-020CN
Cross Brace
Cross-brace - Metal plate with stamped in guide pin on left side - Mounts on the bottom of the center support frame (two used) - Adds rigidity to the base assembly structure - For the 500-sheet input tray assembly
8
RB2-6453-000CN
Cover
Inner cover (Small Quartz Gray plastic cover with sensor flag slot)
10
RC1-2182-000CN
Bushing
Shaft bushing/retainer - Pickup roller support bushing on left side - Mounts on and retains the left end of the pickup roller shaft
11
RC1-2192-000CN
Bushing
Shaft bushing/retainer - Pickup roller support bushing on right side - Mounts on and retains the right end of the pickup roller shaft
12
RC1-2280-000CN
Spring
Leaf spring - Provides ground contact to front cross-brace - Mounts on the on the right side of the center frame assembly
14
RM1-0709-000CN
Roller
Pressure roller assembly - Plastic support frame with two small spring loaded rollers - Rolls against the rubber feed roller
15
RM1-0769-000CN
Cable
Cable assembly - Connects between the 6-pin printer interface connector and the feed drive board
16
RM1-0770-000CN
Cable
Sensor cable assembly - Connects between the paper feed sensor and the feed drive board
17
RM1-0731-040CN
Roller
Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
17
RM1-0731-050CN
Roller
Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
19
WG8-5696-000CN
Sensor
Photo-interrupter sensor assembly (Does not include the sensor flag)
|
|