RC1-1300-000CN printer parts diagram.

12
 

RC1-1300-000CN is represented by #42 in the diagram below.

Internal Components
RC1-1300-000CN is represented by #42 in the diagram below.
  • 1
    • 1 RC1-3249-000CN - Clutch bushing - Bushing between registration clutch CL1 and mount - On right side of printer
  • 2
    • 2 RC1-1353-000CN - Motor cover - Black plastic cover for feed motor M1
  • 3
    • 3 RC1-1488-000CN - Connector cover - Black plastic connector cover for feed motor M1
  • 4
    • 4 RC1-1497-000CN - 25 tooth gear - Mounted in gear assembly on right side of printer
  • 5
    • 5 RC1-1500-000CN - Drive shaft - Roller shaft that supports the paper cassette pickup rollers
  • 8
    • 8 RC1-1630-000CN - Gear bushing - Bushing for 25 tooth gear on right side of printer
  • 9
    • 9 RC1-1649-000CN - Grounding plate - Ground for registration clutch CL1
  • 10
    • 10 RC1-2385-000CN - Clutch shield plate - Shield plate for clutch CL2 on image drive assembly
  • 11
    • 11 RC1-1186-000CN - Clutch mount - Registration clutch (CL1) mount plate
  • 12
    • 12 RM1-0731-040CN - Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
    • 12 RM1-0731-050CN - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
  • 14
    • 14 RC1-1294-000CN - 43 tooth gear - 43 tooth gear mounted in gear assembly on right side of printer
  • 15
    • 15 RC1-1295-000CN - 27 tooth gear - 27 tooth gear mounted in gear assembly on right side of printer
  • 16
    • 16 RC1-1224-000CN - Cluster gear - 50 tooth/90 tooth gear mounted in gear assembly on right side of printer
  • 17
    • 17 RK2-0157-000CN - Low Voltage power supply - Located on bottom left side of printer - 110 volt
    • 17 RK2-0158-000CN - Low Voltage power supply - Located on bottom left side of printer - 220 volt
  • 18
    • 18 RL1-0193-000CN - Drive plate - Paper feeder gear drive assembly plate - Metal plate on lower right side of printer that gears for paper feeder drive are attached to
  • 19
    • 19 RC1-2334-000CN - Cable guide - Guide for cable in lower right front corner
  • 20
    • 20 RC1-1281-000CN - 39 tooth gear - 39 tooth gear mounted in gear assembly on right side of printer
  • 21
    • 21 RC1-1283-000CN - Cluster gear - 26 tooth/47 tooth gear mounted in gear assembly on right side of printer
  • 22
    • 22 RC1-1286-000CN - Cluster gear - 45 tooth/25 tooth gear mounted in gear assembly on right side of printer
  • 23
    • 23 RC1-1287-000CN - Gear holder - Pivot gear holder for 104/25 cluster gear and
  • 24
    • 24 RC1-1288-000CN - 38 tooth gear - 38 tooth gear mounted in gear assembly on right side of printer
  • 25
    • 25 RC1-1291-000CN - Cluster gear - 104 tooth/25 tooth gear mounted in gear assembly on right side of printer
  • 26
    • 26 RC1-1292-000CN - Tension spring - Provides tension for gear holder that holds 104/25 tooth cluster gear
  • 27
    • 27 RC1-1493-000CN - 20 tooth gear - 20 tooth gear mounted in gear assembly on right side of printer
  • 28
    • 28 RC1-1298-000CN - Cluster gear - 26 tooth/22 tooth/20 tooth gear mounted in gear assembly on right side of printer
  • 29
    • 29 RC1-1665-000CN - Cover - Solenoid cover for SL2 on right front of printer
  • 30
    • 30 RC1-2379-000CN - Cover shield - Cover shield for registration clutch CL1 and mount
  • 31
    • 31 RL1-0217-000CN - Gear support - Pickup roller drive gears support - Piece that the 43 tooth and 27 tooth gears are mounted to on lower right front of printer
  • 33
    • 33 RM1-0482-000CN - CPR connecting cable - From DC controller to PS12/Color Misregistration sensor
  • 34
    • 34 RM1-0498-000CN - Formatter power supply cable - From Low Voltage power supply to DC controller board
  • 35
    • 35 RM1-0488-000CN - Front left cable - DC Controller to PS5/Media sensor
  • 36
    • 36 RK2-0247-000CN - Electromagnetic clutch - Registration clutch - CL1
  • 37
    • 37 WT2-5841-000CN - Cable clip - Push in white plastic stand off for cables
  • 38
    • 38 WT2-5841-000CN - Cable clip - Push in white plastic stand off for cables
  • 41
    • 41 RC1-1284-000CN - Cluster gear - 31 tooth/19 tooth gear mounted in gear assembly on right side of printer
  • 42
    • 42 RC1-1300-000CN - Cluster gear - 54 tooth/17 tooth gear mounted in gear assembly on right side of printer
  • 43
    • 43 RC1-1302-000CN - 79 tooth gear - Large gear mounted in gear assembly on right side of printer
1
RC1-3249-000CN Bushing Clutch bushing - Bushing between registration clutch CL1 and mount - On right side of printer
2
RC1-1353-000CN Cover Motor cover - Black plastic cover for feed motor M1
3
RC1-1488-000CN Cover Connector cover - Black plastic connector cover for feed motor M1
4
RC1-1497-000CN Gear 25 tooth gear - Mounted in gear assembly on right side of printer
5
RC1-1500-000CN Shaft Drive shaft - Roller shaft that supports the paper cassette pickup rollers
6
RC1-1355-000CN Mount Mounting plate -
7
XD9-0136-000CN Clip Retaining E-ring
7
XD9-0233-000CN Clip Retaining E-ring
8
RC1-1630-000CN Bushing Gear bushing - Bushing for 25 tooth gear on right side of printer
9
RC1-1649-000CN Pivot Grounding plate - Ground for registration clutch CL1
10
RC1-2385-000CN Plate Clutch shield plate - Shield plate for clutch CL2 on image drive assembly
11
RC1-1186-000CN Mount Clutch mount - Registration clutch (CL1) mount plate
12
RM1-0731-040CN Roller Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
12
RM1-0731-050CN Roller Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly
13
XD2-1100-322CN Clip E-ring retainer clip
13
XD9-0134-000CN Clip E-ring retainer clip
14
RC1-1294-000CN Gear 43 tooth gear - 43 tooth gear mounted in gear assembly on right side of printer
15
RC1-1295-000CN Gear 27 tooth gear - 27 tooth gear mounted in gear assembly on right side of printer
16
RC1-1224-000CN Gear Cluster gear - 50 tooth/90 tooth gear mounted in gear assembly on right side of printer
17
RK2-0157-000CN Power Supply Low Voltage power supply - Located on bottom left side of printer - 110 volt
17
RK2-0158-000CN Power Supply Low Voltage power supply - Located on bottom left side of printer - 220 volt
18
RL1-0193-000CN Plate Drive plate - Paper feeder gear drive assembly plate - Metal plate on lower right side of printer that gears for paper feeder drive are attached to
19
RC1-2334-000CN Guide Cable guide - Guide for cable in lower right front corner
20
RC1-1281-000CN Gear 39 tooth gear - 39 tooth gear mounted in gear assembly on right side of printer
21
RC1-1283-000CN Gear Cluster gear - 26 tooth/47 tooth gear mounted in gear assembly on right side of printer
22
RC1-1286-000CN Gear Cluster gear - 45 tooth/25 tooth gear mounted in gear assembly on right side of printer
23
RC1-1287-000CN Holder Gear holder - Pivot gear holder for 104/25 cluster gear and
24
RC1-1288-000CN Gear 38 tooth gear - 38 tooth gear mounted in gear assembly on right side of printer
25
RC1-1291-000CN Gear Cluster gear - 104 tooth/25 tooth gear mounted in gear assembly on right side of printer
26
RC1-1292-000CN Spring Tension spring - Provides tension for gear holder that holds 104/25 tooth cluster gear
27
RC1-1493-000CN Gear 20 tooth gear - 20 tooth gear mounted in gear assembly on right side of printer
28
RC1-1298-000CN Gear Cluster gear - 26 tooth/22 tooth/20 tooth gear mounted in gear assembly on right side of printer
29
RC1-1665-000CN Cover Cover - Solenoid cover for SL2 on right front of printer
30
RC1-2379-000CN Cover Cover shield - Cover shield for registration clutch CL1 and mount
31
RL1-0217-000CN Support Gear support - Pickup roller drive gears support - Piece that the 43 tooth and 27 tooth gears are mounted to on lower right front of printer
32
XD9-0137-000CN Clip E-Type retainer ring
32
XD9-0234-000CN Clip E-Type retainer ring
33
RM1-0482-000CN Cable CPR connecting cable - From DC controller to PS12/Color Misregistration sensor
34
RM1-0498-000CN Cable Formatter power supply cable - From Low Voltage power supply to DC controller board
35
RM1-0488-000CN Cable Front left cable - DC Controller to PS5/Media sensor
36
RK2-0247-000CN Clutch Electromagnetic clutch - Registration clutch - CL1
37
WT2-5841-000CN Clip Cable clip - Push in white plastic stand off for cables
38
WT2-5841-000CN Clip Cable clip - Push in white plastic stand off for cables
39
VS1-5057-002CN Connector Fuser electrical connector
39
VS1-7177-002CN Connector Fuser electrical connector
40
RK2-0141-000CN Solenoid Electromechanical solenoid
41
RC1-1284-000CN Gear Cluster gear - 31 tooth/19 tooth gear mounted in gear assembly on right side of printer
42
RC1-1300-000CN Gear Cluster gear - 54 tooth/17 tooth gear mounted in gear assembly on right side of printer
43
RC1-1302-000CN Gear 79 tooth gear - Large gear mounted in gear assembly on right side of printer
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.