RC1-0268-000CN printer parts diagram.

123
 

RC1-0268-000CN is represented by #1 in the diagram below.

Internal Components
RC1-0268-000CN is represented by #1 in the diagram below.
  • 1
    • 1 RC1-0268-000CN - Metal rod between external power button and switch on power supply board
  • 4
    • 4 RU5-0045-020CN - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
  • 5
    • 5 RL1-0264-000CN - Gear - Gear with attached shaft - Driven by pickup drive assembly on right front of printer
  • 6
    • 6 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
    • 6 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
  • 7
    • 7 RU5-0040-000CN - Gear - 23 tooth gear in lower front section of pickup drive assembly
  • 8
    • 8 RC1-0206-000CN - Bushing - On right side of paper pickup drive assembly
  • 8
    • 8 RC1-0206-000CN - Bushing - On right side of paper pickup drive assembly
  • 9
    • 9 RM1-1067-000CN - Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers
    • 9 RM1-1067-030CN - Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers
  • 10
    • 10 RC1-0264-000CN - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft.
  • 11
    • 11 RM1-1198-000CN - Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83
  • 12
    • 12 XA9-1500-000CN - M3 pan-head Phillips screw with flat washer - 8mm long
  • 14
    • 14 RM1-0036-000CN - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette
    • 14 RM1-0036-020CN - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
  • 15
    • 15 RM1-0037-020CN - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
  • 17
    • 17 RC1-0209-000CN - Paper sensor flag for Tray 2 paper pickup assembly
    • 17 RC1-0209-020CN - Paper sensor flag for Tray 2 paper pickup assembly
  • 18
    • 18 RC1-0243-000CN - Right front power supply guide - Attaches to right side of printer chassis
  • 19
    • 19 RC1-3352-000CN - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly
  • 20
    • 20 RC1-0212-000CN - Paper pickup arm holder - Holder for pickup roller shaft
  • 21
    • 21 RC1-0371-000CN - 23 Gear - Gear that drives paper feed roller - Attaches to feed roller shaft
  • 22
  • 23
    • 23 RC1-0213-000CN - Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly
  • 25
    • 25 RC1-0330-020CN - Solenoid damper - Locate on right side of Tray 2 guide - Works with kicker to dampen Tray 2 pickup solenoid on right side of tray guide
  • 26
    • 26 RM1-1192-000CN - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector
  • 27
    • 27 RL1-0015-000CN - Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer
  • 28
    • 28 RM1-0041-020CN - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly
  • 29
    • 29 RB1-8107-000CN - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
  • 30
    • 30 RC1-0242-000CN - Inner right side edge guard - Small plastic guard that protects wires inside chassis on right side of printer.
  • 31
    • 31 RC1-0244-000CN - Support guide - Supports right rear side of power supply board
  • 32
    • 32 RC1-0247-000CN - Right side edge guard - Small plastic guard that protects wires - Mounts on right outer side of printer chassis.
  • 33
    • 33 XA9-1503-000CN - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
  • 34
    • 34 RM1-0042-000CN - Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer
  • 35
    • 35 5851-2766 - Swing plate assembly kit - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear
    • 35 RM1-0043-060CN - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
  • 37
    • 37 RM1-1193-000CN - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector
  • 38
    • 38 RC1-0254-000CN - Torsion spring - Provides tension for Tray 2 kicker - Mounts on Tray 2 guide assembly
  • 39
    • 39 RC1-1923-000CN - Torsion spring - Provides tension for paper sensor flag
  • 41
    • 41 RM1-0034-070CN - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced
1
RC1-0268-000CN Rod Metal rod between external power button and switch on power supply board
2
RC1-0340-020CN Guide Guide for scanner cable 1
3
RC1-0273-000CN Guide Paper feed belt guide for left side
4
RU5-0045-020CN Gear 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
5
RL1-0264-000CN Gear Gear - Gear with attached shaft - Driven by pickup drive assembly on right front of printer
6
WG8-5624-000CN Sensor Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
6
WG8-5624-000CN Sensor Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
7
RU5-0040-000CN Gear Gear - 23 tooth gear in lower front section of pickup drive assembly
8
RC1-0206-000CN Bushing Bushing - On right side of paper pickup drive assembly
8
RC1-0206-000CN Bushing Bushing - On right side of paper pickup drive assembly
9
RM1-1067-000CN Laser Scanner Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers
9
RM1-1067-030CN Laser Scanner Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers
10
RC1-0264-000CN Bushing Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft.
11
RM1-1198-000CN Cable Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83
12
XA9-1500-000CN Screw M3 pan-head Phillips screw with flat washer - 8mm long
13
RK2-0269-000CN Solenoid Paper pick-up solenoid
14
RM1-0036-000CN Roller Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette
14
RM1-0036-020CN Roller Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
15
RM1-0037-020CN Roller Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
16
RC1-0208-030CN Holder Paper sensor flag holder
17
RC1-0209-000CN Flag Paper sensor flag for Tray 2 paper pickup assembly
17
RC1-0209-020CN Flag Paper sensor flag for Tray 2 paper pickup assembly
18
RC1-0243-000CN Guide Right front power supply guide - Attaches to right side of printer chassis
19
RC1-3352-000CN Holder Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly
20
RC1-0212-000CN Holder Paper pickup arm holder - Holder for pickup roller shaft
21
RC1-0371-000CN Gear 23 Gear - Gear that drives paper feed roller - Attaches to feed roller shaft
22
RL1-0013-000CN Mount Swing plate - Pivot mount for pickup roller shaft
23
RC1-0213-000CN Spring Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly
24
RC1-0153-030CN Guide Right side Tray 2 paper cassette guide
25
RC1-0330-020CN Damper Solenoid damper - Locate on right side of Tray 2 guide - Works with kicker to dampen Tray 2 pickup solenoid on right side of tray guide
26
RM1-1192-000CN Cable Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector
27
RL1-0015-000CN Flag Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer
28
RM1-0041-020CN Sensor Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly
29
RB1-8107-000CN Foot Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
30
RC1-0242-000CN Guard Inner right side edge guard - Small plastic guard that protects wires inside chassis on right side of printer.
31
RC1-0244-000CN Guide Support guide - Supports right rear side of power supply board
32
RC1-0247-000CN Guard Right side edge guard - Small plastic guard that protects wires - Mounts on right outer side of printer chassis.
33
XA9-1503-000CN Screw M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
34
RM1-0042-000CN Connector Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer
35
5851-2766 Lever Swing plate assembly kit - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear
35
RM1-0043-060CN Lever Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears.
36
RM1-1189-000CN Cable Top bin full sensor cable
37
RM1-1193-000CN Cable Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector
38
RC1-0254-000CN Spring Torsion spring - Provides tension for Tray 2 kicker - Mounts on Tray 2 guide assembly
39
RC1-1923-000CN Spring Torsion spring - Provides tension for paper sensor flag
41
RM1-0034-070CN Pickup Assembly Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced
123
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.