RB3-0104-000CN printer parts diagram.

123
 

RB3-0104-000CN is represented by #9 in the diagram below.

Front Frame Assembly
RB3-0104-000CN is represented by #9 in the diagram below.
  • 1
    • 1 RB2-9952-000CN - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
  • 2
    • 2 RB9-0890-000CN - Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1)
  • 3
    • 3 RB9-0889-000CN - Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1)
  • 4
    • 4 RB2-3043-000CN - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
  • 5
    • 5 RB2-3044-000CN - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
  • 6
    • 6 RB2-6248-000CN - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
  • 7
    • 7 Q3948-67914 - Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
    • 7 Q3948-67914 - Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
    • 7 RB3-1134-000CN - Internal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray
  • 8
    • 8 RB3-1135-000CN - Lower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer
  • 9
    • 9 RB3-0104-000CN - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
  • 10
    • 10 RB3-0111-000CN - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
  • 12
    • 12 RB3-0120-000CN - Solenoid cover (Steel) - For magnetic wave sheilding
    • 12 RB3-0120-020CN - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
  • 13
    • 13 RB3-0121-000CN - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
  • 14
    • 14 RB3-0122-000CN - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
  • 16
    • 16 RH7-5383-000CN - Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
  • 17
    • 17 Q3948-67907 - Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
    • 17 RF5-4012-000CN - Separation pad assembly - Includes the separation pad, holder and spring
  • 19
    • 19 RS7-0418-000CN - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
  • 20
    • 20 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
    • 20 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
    • 20 RS7-0424-000CN - Dual gear - 20 tooth / 40 tooth
  • 21
    • 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 21
    • 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 21
    • 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
    • 21 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 23
    • 23 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
    • 23 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
    • 23 RS7-0429-000CN - 26 tooth gear (White plastic) - Has recess for shaft drive pin
  • 24
    • 24 WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
  • 25
    • 25 RG5-7601-000CN - Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
  • 26
    • 26 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
    • 26 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
    • 26 RG5-6938-000CN - Gear assembly - Metal plate with two White plastic gears attached
    • 26 RG5-6938-030CN - Gear assembly - Metal plate with two White plastic gears attached
  • 27
    • 27 RG5-7584-000CN - Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1)
  • 28
    • 28 Q3948-67907 - Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
    • 28 Q3948-67912 - Paper pickup roller kit - Includes the `D` shaped the paper pickup roller assembly and the separation pad assembly - For the multipurpose front input tray (tray 1)
    • 28 RB3-0160-000CN - Paper pickup roller ('D' shaped)
    • 28 RG5-6952-000CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
    • 28 RG5-6952-020CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
  • 29
    • 29 WT2-5700-000CN - Cable clamp - White plastic clamp with mounting pin
  • 30
    • 30 RG5-7131-000CN - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
  • 33
    • 33 Q3948-67913 - Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
    • 33 Q3948-67928 - Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
    • 33 RS5-1635-000CN - Shaft bushing for HP Color LaserJet 1500 Series
  • 34
    • 34 RF5-4047-000CN - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
  • 36
    • 36 RS6-8687-000CN - Label - Illustrates the imaging drum/transfer assembly cartridge removal procedure - Mounts on the upper internal cover
  • 37
1
RB2-9952-000CN Spring Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
2
RB9-0890-000CN Hinge Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1)
3
RB9-0889-000CN Hinge Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1)
4
RB2-3043-000CN Bushing Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
5
RB2-3044-000CN Bushing Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
6
RB2-6248-000CN Damper Damper assembly (Gray plastic piece with small 13-tooth gear on it)
7
Q3948-67914 Cover Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
7
Q3948-67914 Cover Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
7
RB3-1134-000CN Cover Internal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray
8
RB3-1135-000CN Cover Lower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer
9
RB3-0104-000CN Cover Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
10
RB3-0111-000CN Flag Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
11
RG5-7624-000CN Cable Cable assembly (two 3-pin connectors)
12
RB3-0120-000CN Cover Solenoid cover (Steel) - For magnetic wave sheilding
12
RB3-0120-020CN Cover Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
13
RB3-0121-000CN Spring Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
14
RB3-0122-000CN Spring Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
15
RB3-0135-000CN Flag Test print flag (Black lever)
16
RH7-5383-000CN Solenoid Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1)
17
Q3948-67907 Roller Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
17
RF5-4012-000CN Pad Separation pad assembly - Includes the separation pad, holder and spring
18
RS6-2030-000CN Spring Tension spring for HP Color LaserJet 1500 Series
18
RS6-2030-000CN Spring Tension spring for HP Color LaserJet 1500 Series
19
RS7-0418-000CN Gear 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
20
Q3948-67913 Gear Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
20
Q3948-67928 Gear Assembly Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
20
RS7-0424-000CN Gear Dual gear - 20 tooth / 40 tooth
21
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
21
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
22
RS7-0426-000CN Gear Dual gear - 26 tooth / 50 tooth (White plastic)
23
Q3948-67913 Gear Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
23
Q3948-67928 Gear Assembly Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
23
RS7-0429-000CN Gear 26 tooth gear (White plastic) - Has recess for shaft drive pin
24
WG8-5593-000CN PC Board Sensor PC board - Small board with flag activated photosensor
25
RG5-7601-000CN Tray Assembly Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
26
Q3948-67913 Gear Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
26
Q3948-67928 Gear Assembly Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
26
RG5-6938-000CN Gear Gear assembly - Metal plate with two White plastic gears attached
26
RG5-6938-030CN Gear Assembly Gear assembly - Metal plate with two White plastic gears attached
27
RG5-7584-000CN Guide Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1)
28
Q3948-67907 Roller Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
28
Q3948-67912 Roller Paper pickup roller kit - Includes the `D` shaped the paper pickup roller assembly and the separation pad assembly - For the multipurpose front input tray (tray 1)
28
RB3-0160-000CN Roller Paper pickup roller ('D' shaped)
28
RG5-6952-000CN Roller Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
28
RG5-6952-020CN Roller Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
29
WT2-5700-000CN Clamp Cable clamp - White plastic clamp with mounting pin
30
RG5-7131-000CN Reader E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
31
WT2-5056-000CN Clip Cable clip - `C` shaped White plastic
32
RS7-0425-000CN Gear 30 tooth gear (White plastic)
33
Q3948-67913 Gear Front frame gear kit - Includes the 20 tooth / 40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly, and the bushing for the paper pickup clutch gear shaft
33
Q3948-67928 Gear Assembly Front frame gear kit - Includes the 20 tooth/40 tooth dual gear, 26 tooth gear, metal plate with two gears assembly and the bushing for the paper pickup clutch gear shaft - All mount on the right side of the front frame assembly
33
RS5-1635-000CN Bushing Shaft bushing for HP Color LaserJet 1500 Series
34
RF5-4047-000CN Pad Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
35
RB2-9954-000CN Guide Left paper feed guide (small Black plastic arm)
36
RS6-8687-000CN Label Label - Illustrates the imaging drum/transfer assembly cartridge removal procedure - Mounts on the upper internal cover
37
RB2-9955-000CN Guide Right paper feed guide (small Black plastic arm)
38
RS5-1638-000CN Bushing Bushing for HP Color LaserJet 1500 Series
39
XD2-1100-502CN Clip E-ring clip for HP Color LaserJet 1500 Series
123
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.