|
|
RB2-8047-000CN is represented by #4 in the diagram below.
ADF Scanner Assembly
- 1
- 1 RB2-8678-000CN - Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board
- 2
- 2 RB2-8040-000CN - Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly
- 3
- 3 RB2-8046-000CN - Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
- 4
- 4 RB2-8047-000CN - Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
- 5
- 5 RB2-8048-000CN - ADF assembly front cover - Mounts on the end of the ADF main assembly structure
- 6
- 6 RB2-8681-000CN - Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
- 7
- 7 RB2-8682-000CN - Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
- 8
- 8 RB2-8693-000CN - ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism
- 9
- 9 RF5-3850-000CN - ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly
- 10
- 10 RH2-5456-000CN - Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
- 12
- 12 RG5-6274-000CN - ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)
- 13
- 13 RH5-3078-000CN - ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assemby towards the center rear
- 13 RH5-3078-030CN - ADF intermediate PC board - Has four cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear
- 14
- 14 RG5-6311-000CN - Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly
- 15
- 15 RH7-1486-000CN - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
- 15 RH7-1486-020CN - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
- 16
- 16 RG5-6313-000CN - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
- 16 RG5-6313-030CN - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
- 17
- 17 RB2-7943-000CN - Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
- 18
- 18 WG8-5362-000CN - Photo-sensor (TLP1241) - Sensor flag activated.
- 18 WG8-5624-000CN - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
- 20
- 20 RF5-3682-000CN - Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
- 21
- 21 RF5-3698-000CN - Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
- 22
- 22 RB2-7939-000CN - Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
- 22 RB2-7939-000CN - Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
1
RB2-8678-000CN
Ferrite Assembly
Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board
2
RB2-8040-000CN
Cover
Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly
3
RB2-8046-000CN
Guide
Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
4
RB2-8047-000CN
Guide
Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
5
RB2-8048-000CN
Cover
ADF assembly front cover - Mounts on the end of the ADF main assembly structure
6
RB2-8681-000CN
Guide
Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
7
RB2-8682-000CN
Guide
Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
8
RB2-8693-000CN
Holder
ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism
9
RF5-3850-000CN
Filter
ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly
10
RH2-5456-000CN
Cable
Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
12
RG5-6274-000CN
Sensor
ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)
13
RH5-3078-000CN
PC Board
ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assemby towards the center rear
13
RH5-3078-030CN
PC Board
ADF intermediate PC board - Has four cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear
14
RG5-6311-000CN
Guide
Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly
15
RH7-1486-000CN
Fan
ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
15
RH7-1486-020CN
Fan
ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
16
RG5-6313-000CN
Guide
Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
16
RG5-6313-030CN
Guide
Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
17
RB2-7943-000CN
Lever
Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
18
WG8-5624-000CN
Sensor
Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
20
RF5-3682-000CN
Guide
Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
21
RF5-3698-000CN
Guide
Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
22
RB2-7939-000CN
Arm
Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
22
RB2-7939-000CN
Arm
Tray rack arm - Strip of plastic with gear teeth molded into one side - Keeps the front and rear paper guides on the ADF input tray equidistant from the center (two used)
|
|