J4102-61021 is represented by #12 in the diagram below.
Electronics Enclosure
- 1
- 1 C3196-60053 - Back cover/panel - Metal cover for the electronic enclosure assembly
- 2
- 2 C3196-60056 - Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
- 2 C3196-60056 - Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
- 3
- 3 C3196-60057 - Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
- 3
- 3 C3196-60057 - Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
- 4
- 4 C4704-40050 - SIMM module shield
- 4 C4706-60088 - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
- 5
- 5 C3190-60137 - Tubeaxial fan for HP DesignJet 750C Series
- 6
- 6 C3195-00009 - SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
- 6 C4706-60088 - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
- 7
- 7 C3195-80005 - RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
- 7
- 7 C3195-80005 - RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
- 8
- 8 C3196-60053 - Back cover/panel - Metal cover for the electronic enclosure assembly
- 8 C4706-60088 - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
- 9
- 9 C4705-69001 - Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports
- 11
- 11 C3195-80009 - Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.
- 12
- 12 J2555-69013 - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
- 12 J2555B - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
- 12 J2590A - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
- 12 J2591-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
- 12 J2594-69001 - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
- 12 J3258-61011 - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
- 12 J3258-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
- 12 J3258-61041 - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
- 12 J3264A - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
- 12 J4100-69001 - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
- 12 J4101B - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
- 12 J4102-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
- 12 J4102-69022 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
- 13
- 13 J2382-69003 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
- 13 J2550-69013 - EtherTwist 10Base-T LAN interface board
- 13 J2550B - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.
- 13 J2552B - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
- 13 J2590-69001 - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
- 13 J2591A - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
- 13 J2592-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
- 13 J2593-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
- 13 J3258B - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
- 13 J3265-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
- 13 J3265G - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
- 13 J4102B - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
- 13
- 13 0950-2623 - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
- 14
- 14 C3190-00016 - Insulator - Mounts between the power supply and main cover/panel of the electronic enclosure assembly
- 15
- 15 C3195-60149 - AC wiring harness - Includes power switch, AC receptacle, and connector
1
C3196-60053
Cover
Back cover/panel - Metal cover for the electronic enclosure assembly
2
C3196-60056
Cable
Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
2
C3196-60056
Cable
Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
3
C3196-60057
Cable
Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
3
C3196-60057
Cable
Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
4
C4706-60088
Cover
Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
5
C3190-60137
Fan
Tubeaxial fan for HP DesignJet 750C Series
6
C3195-00009
Cover
SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
6
C4706-60088
Cover
Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
7
C3195-80005
Shield
RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
7
C3195-80005
Shield
RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing
8
C3196-60053
Cover
Back cover/panel - Metal cover for the electronic enclosure assembly
8
C4706-60088
Cover
Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier
9
C4705-69001
PC Board
Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports
11
C3195-80009
Cable
Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.
12
J2555-69013
PC Board
JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
12
J2555B
PC Board Interface
JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
12
J2590A
PC Board Interface
External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
12
J2591-69001
PC Board Interface
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
12
J2594-69001
PC Board Interface
External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
12
J3258-61011
PC Board
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
12
J3258-61021
Module
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
12
J3258-61041
PC Board Interface
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
12
J3264A
PC Board Interface
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
12
J4100-69001
PC Board
JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
12
J4101B
PC Board Interface
HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
12
J4102-61021
Module
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
12
J4102-69022
Module
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
13
0950-2623
Power Supply
Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
13
J2382-69003
Module
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
13
J2550B
PC Board Interface
EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.
13
J2552B
PC Board Interface
LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
13
J2590-69001
Module
External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
13
J2591A
PC Board Interface
External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
13
J2592-69001
Module
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
13
J2593-69001
Module
External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
13
J3258B
PC Board Interface
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
13
J3265-69001
PC Board Interface
External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
13
J3265G
PC Board Interface
HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
13
J4102B
PC Board Interface
External JetDirect LAN interface module with EtherTwist (10Base-T) connector
14
C3190-00016
Insulator
Insulator - Mounts between the power supply and main cover/panel of the electronic enclosure assembly
15
C3195-60149
Harness
AC wiring harness - Includes power switch, AC receptacle, and connector
|