C4602-40039 printer parts diagram.

 

C4602-40039 is represented by #43 in the diagram below.

C4602-40039 is represented by #43 in the diagram below.
  • 3
    • 3 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
  • 5
    • 5 C2128-00006 - Separator spring - Provides pressure between the separator assembly and the center drive roller
  • 6
    • 6 C2128-40032 - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
  • 7
    • 7 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
  • 9
    • 9 C2128-00002 - Kicker spring - Provides tension for the kicker
  • 10
    • 10 C2145-00017 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
  • 11
    • 11 C2145-67851 - Carriage assembly - Does not include trailing cable
  • 12
    • 12 C2128-40015 - Left lifter cap - Holds the pressure plate lifter in place
  • 13
  • 13
  • 14
    • 14 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
  • 15
    • 15 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
  • 16
    • 16 C2145-00033 - ESD spring - Installed between ESD blade and carriage PC board
  • 16
    • 16 C2145-00033 - ESD spring - Installed between ESD blade and carriage PC board
  • 17
    • 17 C5876-60066 - Service station motor - Drives the service station assembly
  • 18
    • 18 C5876-60103 - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
  • 19
    • 19 C4602-80004 - Head drive flex cable - 43.2cm (17in) long
  • 22
    • 22 C4602-00014 - Bearing Plate - Provides smooth surface for Clutch Actuator to ride against
  • 23
    • 23 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
  • 24
    • 24 C4602-40036 - Belt clamp (attachment) - Secures the drive belt to carriage
  • 25
    • 25 C2128-80075 - Foam catch pad - Keeps paper catch from moving inadvertently
  • 26
    • 26 C4602-60040 - Carriage PC board - Does not include trailing cable
  • 27
    • 27 C4602-60004 - Paper motor - Drives paper through printer
  • 28
    • 28 C4602-67804 - Pickup roller assembly (Pivot) - Picks paper from paper input tray
  • 29
    • 29 C4555-67805 - Drive roller pre-loader - Applies tension to the drive roller shaft
  • 31
    • 31 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
  • 33
    • 33 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 33
    • 33 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 34
    • 34 C2145-00046 - Pivot spring - Provides tension for the pivot
  • 35
    • 35 C2145-40058 - Drive belt - For the print mechanism carriage assembly
  • 36
    • 36 C4555-67849 - Carriage Plate Assembly - Includes Carriage Plate, Upper Paper Guide, Antistatic Brush, Pivot Stop Adjuster, and Z Axis Service Station Adjustment (ZASSA)
  • 38
    • 38 C4602-00012 - Bias spring - Provides down pressure on the clutch actuator arm
  • 39
    • 39 C2145-80016 - Encoder strip - Carriage position sensor reference
  • 40
    • 40 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
  • 41
    • 41 C4602-69801 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
  • 42
    • 42 C4555-60068 - Turnaround assembly - Holds belt tension components in place
  • 43
    • 43 C4602-40039 - Clutch actuator arm - Used to engage the pivot gears
  • 45
    • 45 C4602-60022 - Carriage motor - Provides power for carriage belt
  • 47
    • 47 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
  • 48
    • 48 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
1
C4555-60086 Separator Separator assembly
2
C4549-40029 Lifter Separator lifter
3
C2145-40019 Lifter Pressure plate lifter - Also known as lifter shaft or paper lifter
4
C2124-60116 Roller Lower pinch roller
5
C2128-00006 Spring Separator spring - Provides pressure between the separator assembly and the center drive roller
6
C2128-40032 Cap Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
7
C2145-20007 Rod Carriage rod - Shaft that the carriage assembly rides on
8
C2145-40022 Link Separator link (Separator peg)
9
C2128-00002 Spring Kicker spring - Provides tension for the kicker
10
C2145-00017 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
11
C2145-67851 Carriage Carriage assembly - Does not include trailing cable
12
C2128-40015 Cap Left lifter cap - Holds the pressure plate lifter in place
13
C2145-00037 Blade ESD blade for HP DeskJet 870C Series
14
C2145-40023 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
15
C2145-40020 Arm Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
16
C2145-00033 Spring ESD spring - Installed between ESD blade and carriage PC board
17
C5876-60066 Motor Service station motor - Drives the service station assembly
18
C5876-60103 Cable Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
19
C4602-80004 Cable Head drive flex cable - 43.2cm (17in) long
20
C2145-40118 Guide Pre-guide (For envelopes)
21
C2145-00044 Spring Carriage rod spring
22
C4602-00014 Plate Bearing Plate - Provides smooth surface for Clutch Actuator to ride against
23
C2145-00018 Spring Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
24
C4602-40036 Clamp Belt clamp (attachment) - Secures the drive belt to carriage
25
C2128-80075 Pad Foam catch pad - Keeps paper catch from moving inadvertently
26
C4602-60040 PC Board Carriage PC board - Does not include trailing cable
27
C4602-60004 Motor Paper motor - Drives paper through printer
28
C4602-67804 Roller Pickup roller assembly (Pivot) - Picks paper from paper input tray
29
C4555-67805 Preloader Drive roller pre-loader - Applies tension to the drive roller shaft
30
C4555-00002 Ground Paper motor ground strap
31
C2145-40101 Clamp Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
32
C4602-40013 Gear PPR cluster gear
33
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
34
C2145-00046 Spring Pivot spring - Provides tension for the pivot
35
C2145-40058 Belt Drive belt - For the print mechanism carriage assembly
36
C4555-67849 Plate Carriage Plate Assembly - Includes Carriage Plate, Upper Paper Guide, Antistatic Brush, Pivot Stop Adjuster, and Z Axis Service Station Adjustment (ZASSA)
37
C4555-40005 Guide Lower paper guide
38
C4602-00012 Spring Bias spring - Provides down pressure on the clutch actuator arm
39
C2145-80016 Strip Encoder strip - Carriage position sensor reference
40
C4555-60067 Idler Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
41
C4602-69801 Print Mechanism Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
42
C4555-60068 Turnaround Assembly Turnaround assembly - Holds belt tension components in place
43
C4602-40039 Arm Clutch actuator arm - Used to engage the pivot gears
44
C2145-40064 Flag OOPS flag - Out of paper sensor
45
C4602-60022 Shield Carriage motor - Provides power for carriage belt
46
C4555-40008 Flag Envelope sensor flag
47
C2145-40117 Clamp Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
48
C2145-00042 Stiffener Encoder stiffener - Prevents oscillation of encoder strip
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.