C4562-60043 printer parts diagram.

C4562-60043 is represented by #17 in the diagram below.

• 1
  • 1 C2162-67813 - OOPS flag - Out of paper sensor

• 2
  • 2 C2124-20008 - Limiter spring - Provides tension for rotation limiter

• 3
  • 3 C4562-40022 - Rotation limiter - Provides correct pressure to cap pen

• 4
  • 4 C2162-20004 - Pivot spring - Provides tension for pivot to return to upright position

• 5
  • 5 C2162-67806 - Preloader - Applies downward pressure on drive shaft

• 6
  • 6 C2162-40036 - Flex Support - Supports Flex Circuitry of Carriage Assembly

• 7
  • 7 C2145-00017 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter

• 8
  • 8 C4549-67806 - Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism

• 9
  • 9 C2124-20001 - Rear rail - Supports carriage assembly

• 10
  • 10 C2128-60018 - Separator pad assembly

• 11
  • 11 C4562-40032 - Belt tension bracket - Pivot bracket for idler pulley - Applies tension to the carriage belt

• 12
  • 12 C2124-60162 - Upper pinch roller and spring assembly

• 12
  • 12 C2124-60162 - Upper pinch roller and spring assembly

• 12
  • 12 C2124-60162 - Upper pinch roller and spring assembly

• 12
  • 12 C2124-60162 - Upper pinch roller and spring assembly

• 12
  • 12 C2124-60162 - Upper pinch roller and spring assembly

• 12
  • 12 C2124-60162 - Upper pinch roller and spring assembly

• 13
  • 13 C2124-00001 - Encoder spring - Provides tension for encoder strip

• 14
  • 14 C2162-20005 - Carriage rod - Supports horizontal carriage movement

• 15
  • 15 C2170-40002 - Envelope sensor

• 16
  • 16 C6450-80052 - Spittoon sponge - located in bottom of spittoon

• 17
  • 17 C4562-60043 - Carriage assembly - Includes flex cable - Not for DeskJet 695CCI
  • 17 C4562-60083 - Carriage assembly for DeskJet 695CCI only - Includes flex cable

• 18
  • 18 C6450-40011 - Spittoon - Holds ink expelled from cartridge during refresh cycle

• 19
  • 19 C2124-00009 - Spring - Installed in spittoon assembly

• 20
  • 20 C2124-60116 - Lower pinch roller

• 20
  • 20 C2124-60116 - Lower pinch roller

• 20
  • 20 C2124-60116 - Lower pinch roller

• 21
  • 21 C2164-40060 - Carriage belt for HP DeskJet 550C Series

• 22
  • 22 C4549-60036 - Pressure Plate Assembly - Holds media to be printed against the Paper Input Feed Rollers

• 23
  • 23 C2162-40105 - Switch lever - Actuates access door (Open) switch

• 24
  • 24 C2162-40002 - Cluster gear for HP DeskJet 500 Series

• 25
  • 25 C2162-40016 - Idler hub - Drive belt pivot point on left side of chassis

• 26
  • 26 C4562-20003 - Idler pulley axel - Dowel pin for idler pulley

• 27
  • 27 C2162-60009 - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long

• 27
  • 27 C2162-60009 - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long

• 28
  • 28 C4562-60045 - Service station assembly - Includes motor

• 29
  • 29 C6450-60102 - Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges

• 30
  • 30 C2124-80008 - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

• 32
  • 32 C2164-60045 - Paper stepper motor assembly (does NOT include cable)

• 33
  • 33 C2124-60190 - Service station stepper motor (does not include cable) - Moves the rack vertically in the service station assembly

• 34
  • 34 C2162-60006 - Carriage motor assembly (includes cable)

• 35
  • 35 C4562-40009 - Paper width adjuster cap - Medium Purple
  • 35 C4562-60046 - Paper width adjustment stop assembly - Adjusts for input paper width - Has medium purple cap

• 36
  • 36 C2164-00015 - Carriage shaft retainer clip