C4557-40118 printer parts diagram.

123456
 

C4557-40118 is represented by #23 in the diagram below.

C4557-40118 is represented by #23 in the diagram below.
  • 1
    • C4557-40063 - Separator lifter - Used to lift the separator peg
  • 2
    • C4557-20024 - Shifter spring - Provides tension on the pivot
  • 4
    • C4557-40095 - Encoder gear for HP Color Copier 260
    • C4557-60025 - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
    • C6409-60037 - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
    • C6455-60057 - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
  • 5
    • C4557-40150 - Pivot snap - Used to hold pivot to pick feed roller shaft
  • 6
    • C5870-00004 - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
  • 7
    • C4557-20028 - EOR tension spring - Maintains tension on wear strip
  • 8
    • C6409-00013 - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel
  • 10
    • C5870-40020 - Right backbone brace - Installed on right side of printer base to provide support for backbone
  • 12
    • C4557-00033 - Link spring - Provides tension to shaft of pick cam gear
  • 13
    • C6409-40040 - Pick cam - Controls pressure plate and lever
  • 16
    • C4557-00037 - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
  • 18
    • C4557-40016 - Kicker - Restacks paper in stack after top sheet is picked
  • 19
    • C4557-40020 - Lower guide - Platform for seperator peg, spring and pad
  • 20
    • C4557-20003 - Rear roller spring - Flexible axle for rear roller
  • 20
    • C4557-20003 - Rear roller spring - Flexible axle for rear roller
  • 21
    • C5870-40022 - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
  • 21
    • C5870-40022 - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
  • 22
    • C4557-00035 - Paper pusher spring - Maintains alignment in paper tray
  • 22
    • C4557-00035 - Paper pusher spring - Maintains alignment in paper tray
  • 23
    • C4557-40118 - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
  • 24
    • C4557-00009 - Separator spring - Provides pressure between separator assembly and the center drive roller
  • 26
  • 28
    • C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 28
    • C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 28
    • C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 28
    • C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 29
    • C6409-00008 - Upper paper guide support - Base for upper paper guide
  • 30
    • C4557-40130 - Left wall brace - Provides support for left wall
  • 31
    • C4557-40128 - Left backbone brace - Provides support for backbone
  • 34
    • C5870-40030 - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
1
C4557-40063 Lifter Separator lifter - Used to lift the separator peg
2
C4557-20024 Spring Shifter spring - Provides tension on the pivot
3
C4557-80019 Encoder Paper motor encoder disk
4
C4557-40095 Gear Encoder gear for HP Color Copier 260
4
C4557-60025 Roller Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
4
C6409-60037 Roller Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
4
C6455-60057 Plate Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
5
C4557-40150 Snap Pivot snap - Used to hold pivot to pick feed roller shaft
6
C5870-00004 Strip Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
7
C4557-20028 Spring EOR tension spring - Maintains tension on wear strip
8
C6409-00013 Backbone BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel
9
C5870-00002 Clip Service station ESD grounding clip
10
C5870-40020 Brace Right backbone brace - Installed on right side of printer base to provide support for backbone
11
C6429-60025 Link Kicker bar cam link (spring loaded)
12
C4557-00033 Spring Link spring - Provides tension to shaft of pick cam gear
13
C6409-40040 Cam Pick cam - Controls pressure plate and lever
14
C4557-40021 Gear Feed roller idler gear
15
C4557-40085 Link Link pin for HP Color Copier 160
16
C4557-00037 Lever Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
17
C5870-20002 Spring Paper stacker (kicker) spring
18
C4557-40016 Paper Stacker Kicker - Restacks paper in stack after top sheet is picked
19
C4557-40020 Guide Lower guide - Platform for seperator peg, spring and pad
20
C4557-20003 Spring Rear roller spring - Flexible axle for rear roller
21
C5870-40022 Lever Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
22
C4557-00035 Spring Paper pusher spring - Maintains alignment in paper tray
23
C4557-40118 Foot Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
24
C4557-00009 Spring Separator spring - Provides pressure between separator assembly and the center drive roller
25
C5870-40029 Pin Separator peg for HP DeskJet 895C
26
C4557-60011 Separator Separator pad for HP DeskJet 700 Series
28
C4557-20007 Spring Pinch spring - Provides tension on upper paper guide
29
C6409-00008 Support Upper paper guide support - Base for upper paper guide
30
C4557-40130 Brace Left wall brace - Provides support for left wall
31
C4557-40128 Brace Left backbone brace - Provides support for backbone
34
C5870-40030 Roller Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
123456
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2022 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.