C4555-00002 printer parts diagram.

123
 

C4555-00002 is represented by #29 in the diagram below.

C4555-00002 is represented by #29 in the diagram below.
  • 1
    • 1 C4555-67803 - Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
  • 2
    • 2 C4555-67805 - Drive roller pre-loader - Applies tension to the drive roller shaft
  • 5
    • 5 C4555-69801 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
  • 10
    • 10 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
  • 11
    • 11 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
  • 14
  • 15
    • 15 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
  • 17
    • 17 C4555-60061 - Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
  • 19
    • 19 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
  • 22
    • 22 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
  • 23
    • 23 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 24
    • 24 C4555-40063 - Chassis clamp - Retains chassis in the base assembly
  • 26
    • 26 C4531-40009 - Belt attachment - Anchors drive belt to carriage
  • 27
    • 27 C4555-60068 - Turnaround assembly - Holds belt tension components in place
  • 28
    • 28 C4555-60005 - Paper drive motor - Drives media through printer
  • 30
    • 30 C4555-67804 - Pivot - Large plastic item which contains the Pickup Rollers
  • 32
    • 32 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
  • 33
    • 33 C2145-00046 - Pivot spring - Provides tension for the pivot
  • 34
    • 34 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 35
    • 35 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
  • 36
    • 36 C2145-40058 - Drive belt - For the print mechanism carriage assembly
  • 37
    • 37 C2145-80016 - Encoder strip - Carriage position sensor reference
  • 38
    • 38 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears
  • 41
    • 41 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
  • 42
    • 42 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
1
C4555-67803 Chassis Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
2
C4555-67805 Preloader Drive roller pre-loader - Applies tension to the drive roller shaft
3
C4555-40008 Flag Envelope sensor flag
4
C4555-40002 Gear Gear cluster (Dual gear)
5
C4555-69801 Print Mechanism Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
6
C4555-60086 Separator Separator assembly
7
C4549-40029 Lifter Separator lifter
8
C2145-00044 Spring Carriage rod spring
9
C2124-60116 Roller Lower pinch roller
10
C2145-40019 Lifter Pressure plate lifter - Also known as lifter shaft or paper lifter
11
C2145-20007 Rod Carriage rod - Shaft that the carriage assembly rides on
13
C2145-40022 Link Separator link (Separator peg)
14
C2145-00037 Blade ESD blade for HP DeskJet 870C Series
15
C2145-40023 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
16
C2145-40118 Guide Pre-guide (For envelopes)
17
C4555-60061 Cable Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
19
C2145-40020 Arm Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
20
C2145-60012 Motor Service station motor
21
C2145-00044 Spring Carriage rod spring
22
C2145-00018 Spring Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
23
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
24
C4555-40063 Clamp Chassis clamp - Retains chassis in the base assembly
26
C4531-40009 Clamp Belt attachment - Anchors drive belt to carriage
27
C4555-60068 Turnaround Assembly Turnaround assembly - Holds belt tension components in place
28
C4555-60005 Motor Paper drive motor - Drives media through printer
29
C4555-00002 Ground Paper motor ground strap
30
C4555-67804 Pivot Pivot - Large plastic item which contains the Pickup Rollers
32
C2145-40101 Clamp Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
33
C2145-00046 Spring Pivot spring - Provides tension for the pivot
34
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
35
C4555-60067 Idler Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
36
C2145-40058 Belt Drive belt - For the print mechanism carriage assembly
37
C2145-80016 Strip Encoder strip - Carriage position sensor reference
38
C4555-40066 Arm Clutch actuator arm - Used to engage the pivot gears
39
C4555-40005 Guide Lower paper guide
40
C2145-40064 Flag OOPS flag - Out of paper sensor
41
C2145-00042 Stiffener Encoder stiffener - Prevents oscillation of encoder strip
42
C2145-40117 Clamp Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
43
C2145-60011 Motor Carriage motor assembly
123
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.