C4531-60062 printer parts diagram.

C4531-60062 is represented by #29 in the diagram below.

• 1
  • 1 C4555-67803 - Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth

• 2
  • 2 C4555-40008 - Envelope sensor flag

• 3
  • 3 C4555-40002 - Gear cluster (Dual gear)

• 4
  • 4 C4531-69813 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations - Used to replace all three types of print mechanisms

• 5
  • 5 C4555-60086 - Separator assembly

• 6
  • 6 C4549-40029 - Separator lifter

• 7
  • 7 C2145-00044 - Carriage rod spring

• 8
  • 8 C2124-60116 - Lower pinch roller

• 9
  • 9 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter

• 10
  • 10 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on

• 12
  • 12 C2145-40022 - Separator link (Separator peg)

• 13
  • 13 C2145-00037 - ESD blade for HP DeskJet 870C Series

• 14
  • 14 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed

• 15
  • 15 C2145-40118 - Pre-guide (For envelopes)

• 16
  • 16 C5876-60103 - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector

• 17
  • 17 C4531-60129 - Base assembly - Bottom cover with four rubber feet

• 18
  • 18 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter

• 19
  • 19 C4531-60016 - Service station motor - Drives service station assembly

• 20
  • 20 C2145-00044 - Carriage rod spring

• 21
  • 21 C4531-40011 - Carriage flex cable clip - Holds the flex cable

• 22
  • 22 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate

• 23
  • 23 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)

• 24
  • 24 C4555-40063 - Chassis clamp - Retains chassis in the base assembly

• 25
  • 25 C4531-80010 - Head drive flex cable - 41.9cm (16.5in) long

• 26
  • 26 C4531-67803 - Head drive PCA - Has temperature and optical sensors - Drives the print cartridge

• 27
  • 27 C4531-40009 - Belt attachment - Anchors drive belt to carriage

• 28
  • 28 C4555-60068 - Turnaround assembly - Holds belt tension components in place

• 29
  • 29 C4531-60062 - Paper motor - Drives paper through printer - Has horizontal teeth (Not helical) on drive gear

• 30
  • 30 C4555-00002 - Paper motor ground strap

• 31
  • 31 C4555-67804 - Pivot - Large plastic item which contains the Pickup Rollers

• 33
  • 33 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place

• 34
  • 34 C2145-00046 - Pivot spring - Provides tension for the pivot

• 35
  • 35 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)

• 36
  • 36 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle

• 37
  • 37 C2145-40058 - Drive belt - For the print mechanism carriage assembly

• 38
  • 38 C2145-80016 - Encoder strip - Carriage position sensor reference

• 39
  • 39 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears

• 40
  • 40 C4555-40005 - Lower paper guide

• 41
  • 41 C2145-40064 - OOPS flag - Out of paper sensor

• 42
  • 42 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip

• 43
  • 43 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place

• 44
  • 44 C4602-60022 - Carriage motor - Provides power for carriage belt