C2890-40072 printer parts diagram.

 

C2890-40072 is represented by #17 in the diagram below.

C2890-40072 is represented by #17 in the diagram below.
  • 1
    • 1 C2164-60045 - Paper stepper motor assembly (does NOT include cable)
  • 2
  • 5
    • 5 9170-1616 - Toroid - for Control Panel Ribbon Cable and Paper Motor
  • 6
    • 6 C2124-60115 - Carriage motor - Drives the carriage belt
  • 7
    • 7 C2890-60052 - Print mechanism chassis assembly - The base structure of the print mechanism
  • 9
    • 9 C2890-60023 - Pen driver ribbon cable - 27cm (10.5in) long
  • 9
    • 9 C2890-60023 - Pen driver ribbon cable - 27cm (10.5in) long
  • 10
    • 10 C2890-40070 - Lever arm - Used to lift the pressure plate lifter
  • 11
    • 11 C2890-20006 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
  • 12
    • 12 C2890-40068 - Left/right lifter cap - Holds the pressure plate lifter in place
  • 12
    • 12 C2890-40068 - Left/right lifter cap - Holds the pressure plate lifter in place
  • 13
    • 13 C2890-40071 - Separator lifter - Installed between the separator and the pressure plate lifter
  • 14
    • 14 C2890-40075 - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
  • 15
    • 15 C2128-00002 - Kicker spring - Provides tension for the kicker
  • 16
    • 16 C2128-00006 - Separator spring - Provides pressure between the separator assembly and the center drive roller
  • 17
    • 17 C2890-40072 - Separator peg - Lifts the separator pad when the lifter shaft lifts
  • 18
    • 18 C2128-00003 - Helper spring - Used to lift the pressure plate assembly
  • 19
    • 19 C2890-60049 - Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers
  • 20
    • 20 C2128-00051 - Carriage belt damper - Installed under right end of carriage belt
  • 22
    • 22 C2890-60079 - Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position
  • 23
    • 23 C2890-40076 - Adjuster - Used to adjust pen-to-paper spacing
  • 25
    • 25 C2171-67806 - Idler pulley - Holds left end of carriage belt
  • 26
    • 26 C2890-40063 - Belt tension bracket - Holds the carriage belt idler pulley
  • 27
    • 27 C2124-20004 - Belt spring - For belt tension bracket
  • 29
    • 29 C2890-40073 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
  • 32
    • 32 C2890-60076 - Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
  • 33
    • 33 C4549-00002 - Paper guide - Holds the upper pinch rollers and springs
  • 34
    • 34 C2124-60162 - Upper pinch roller and spring assembly
  • 34
    • 34 C2124-60162 - Upper pinch roller and spring assembly
  • 34
    • 34 C2124-60162 - Upper pinch roller and spring assembly
  • 35
    • 35 C2124-20008 - Limiter spring - Provides tension for rotation limiter
  • 36
    • 36 C2890-40067 - Rotation limiter - Limits the rotation of the pivot
  • 37
  • 37
  • 38
    • 38 C2124-00009 - Spring - Installed in spittoon assembly
  • 39
    • 39 C2890-80026 - Ink absorber for HP OfficeJet 330 Series
  • 40
    • 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
  • 40
    • 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
  • 40
    • 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
  • 40
    • 40 C2890-60084 - Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
  • 41
    • 41 C2113-40006 - Wiper - Cleans ink and debris from print nozzles
  • 42
    • 42 C2890-60080 - Service station assembly - Includes service station base (frame) and sled retainer
  • 42
    • 42 C2890-60080 - Service station assembly - Includes service station base (frame) and sled retainer
  • 44
    • 44 C2890-40108 - OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
  • 45
    • 45 C2164-40060 - Carriage belt for HP DeskJet 550C Series
  • 46
    • 46 C2124-80008 - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
  • 47
    • 47 C2124-20001 - Rear rail - Supports carriage assembly
  • 48
    • 48 C2124-00001 - Encoder spring - Provides tension for encoder strip
  • 49
    • 49 C2170-00002 - Carriage rod retainer - Holds left end of carriage rod
  • 50
    • 50 C2165-00001 - Left bracket - Carriage rod adjustment bracket (Left)
  • 51
    • 51 C2170-00008 - Right bracket - Carriage rod adjustment bracket (Right)
  • 52
    • 52 C2162-20005 - Carriage rod - Supports horizontal carriage movement
  • 53
    • 53 C2890-60082 - Carriage assembly - Includes flex cable and bushings
1
C2164-60045 Motor Paper stepper motor assembly (does NOT include cable)
2
C2162-40002 Gear Cluster gear for HP DeskJet 500 Series
3
C2124-20011 Spring Pre-loader spring
4
C2890-60238 Cable Paper motor power cable
5
9170-1616 Toroid Toroid - for Control Panel Ribbon Cable and Paper Motor
6
C2124-60115 Motor Carriage motor - Drives the carriage belt
7
C2890-60052 Chassis Print mechanism chassis assembly - The base structure of the print mechanism
8
9170-1618 Toroid Toroid for pen driver cable
9
C2890-60023 Cable Pen driver ribbon cable - 27cm (10.5in) long
10
C2890-40070 Arm Lever arm - Used to lift the pressure plate lifter
11
C2890-20006 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
12
C2890-40068 Cap Left/right lifter cap - Holds the pressure plate lifter in place
13
C2890-40071 Lifter Separator lifter - Installed between the separator and the pressure plate lifter
14
C2890-40075 Cap Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
15
C2128-00002 Spring Kicker spring - Provides tension for the kicker
16
C2128-00006 Spring Separator spring - Provides pressure between the separator assembly and the center drive roller
17
C2890-40072 Peg Separator peg - Lifts the separator pad when the lifter shaft lifts
18
C2128-00003 Spring Helper spring - Used to lift the pressure plate assembly
19
C2890-60049 Plate Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers
20
C2128-00051 Damper Carriage belt damper - Installed under right end of carriage belt
21
C2890-60078 Actuator Clutch actuator
22
C2890-60079 Holder Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position
23
C2890-40076 Adjuster Adjuster - Used to adjust pen-to-paper spacing
24
1480-1023 Shaft Idler shaft (dowel pin)
25
C2171-67806 Idler Idler pulley - Holds left end of carriage belt
26
C2890-40063 Bracket Belt tension bracket - Holds the carriage belt idler pulley
27
C2124-20004 Spring Belt spring - For belt tension bracket
28
C2890-60083 PC Board Pen driver PC board
29
C2890-40073 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
30
C2128-60018 Separator Separator pad assembly
31
C2124-60116 Roller Lower pinch roller
32
C2890-60076 Roller Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
33
C4549-00002 Guide Paper guide - Holds the upper pinch rollers and springs
34
C2124-60162 Roller Upper pinch roller and spring assembly
35
C2124-20008 Spring Limiter spring - Provides tension for rotation limiter
36
C2890-40067 Limiter Rotation limiter - Limits the rotation of the pivot
37
C2890-60081 Spitton Spittoon assembly - Includes absorber
38
C2124-00009 Spring Spring - Installed in spittoon assembly
39
C2890-80026 Absorber Ink absorber for HP OfficeJet 330 Series
40
C2890-60084 Sled Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
41
C2113-40006 Wiper Wiper - Cleans ink and debris from print nozzles
42
C2890-60080 Service Station Service station assembly - Includes service station base (frame) and sled retainer
43
C2890-40077 Sensor Envelope sensor
44
C2890-40108 Flag OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
45
C2164-40060 Belt Carriage belt for HP DeskJet 550C Series
46
C2124-80008 Strip Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
47
C2124-20001 Rail Rear rail - Supports carriage assembly
48
C2124-00001 Spring Encoder spring - Provides tension for encoder strip
49
C2170-00002 Retainer Carriage rod retainer - Holds left end of carriage rod
50
C2165-00001 Bracket Left bracket - Carriage rod adjustment bracket (Left)
51
C2170-00008 Bracket Right bracket - Carriage rod adjustment bracket (Right)
52
C2162-20005 Rod Carriage rod - Supports horizontal carriage movement
53
C2890-60082 Carriage Carriage assembly - Includes flex cable and bushings
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.