C2162-40105 printer parts diagram.

12345
 

C2162-40105 is represented by #23 in the diagram below.

C2162-40105 is represented by #23 in the diagram below.
  • 2
    • 2 C2124-20008 - Limiter spring - Provides tension for rotation limiter
  • 3
    • 3 C4562-40022 - Rotation limiter - Provides correct pressure to cap pen
  • 4
    • 4 C2162-20004 - Pivot spring - Provides tension for pivot to return to upright position
  • 5
    • 5 C2162-67806 - Preloader - Applies downward pressure on drive shaft
  • 6
    • 6 C2162-40036 - Flex Support - Supports Flex Circuitry of Carriage Assembly
  • 7
    • 7 C2145-00017 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
  • 8
    • 8 C4549-67806 - Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
  • 9
  • 11
    • 11 C4562-40032 - Belt tension bracket - Pivot bracket for idler pulley - Applies tension to the carriage belt
  • 12
    • 12 C2124-60162 - Upper pinch roller and spring assembly
  • 12
    • 12 C2124-60162 - Upper pinch roller and spring assembly
  • 12
    • 12 C2124-60162 - Upper pinch roller and spring assembly
  • 12
    • 12 C2124-60162 - Upper pinch roller and spring assembly
  • 12
    • 12 C2124-60162 - Upper pinch roller and spring assembly
  • 12
    • 12 C2124-60162 - Upper pinch roller and spring assembly
  • 13
    • 13 C2124-00001 - Encoder spring - Provides tension for encoder strip
  • 14
    • 14 C2162-20005 - Carriage rod - Supports horizontal carriage movement
  • 16
    • 16 C6450-80052 - Spittoon sponge - located in bottom of spittoon
  • 17
    • 17 C4562-60043 - Carriage assembly - Includes flex cable - Not for DeskJet 695CCI
    • 17 C4562-60083 - Carriage assembly for DeskJet 695CCI only - Includes flex cable
  • 18
    • 18 C6450-40011 - Spittoon - Holds ink expelled from cartridge during refresh cycle
  • 19
    • 19 C2124-00009 - Spring - Installed in spittoon assembly
  • 21
    • 21 C2164-40060 - Carriage belt for HP DeskJet 550C Series
  • 22
    • 22 C4549-60036 - Pressure Plate Assembly - Holds media to be printed against the Paper Input Feed Rollers
  • 23
    • 23 C2162-40105 - Switch lever - Actuates access door (Open) switch
  • 24
    • 24 C2162-40002 - Cluster gear for HP DeskJet 500 Series
  • 25
    • 25 C2162-40016 - Idler hub - Drive belt pivot point on left side of chassis
  • 26
    • 26 C4562-20003 - Idler pulley axel - Dowel pin for idler pulley
  • 27
    • 27 C2162-60009 - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
  • 27
    • 27 C2162-60009 - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
  • 28
    • 28 C4562-60045 - Service station assembly - Includes motor
  • 29
    • 29 C6450-60102 - Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges
  • 30
    • 30 C2124-80008 - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
  • 32
    • 32 C2164-60045 - Paper stepper motor assembly (does NOT include cable)
  • 33
    • 33 C2124-60190 - Service station stepper motor (does not include cable) - Moves the rack vertically in the service station assembly
  • 34
    • 34 C2162-60006 - Carriage motor assembly (includes cable)
  • 35
    • 35 C4562-40009 - Paper width adjuster cap - Medium Purple
    • 35 C4562-60046 - Paper width adjustment stop assembly - Adjusts for input paper width - Has medium purple cap
1
C2162-67813 Flag OOPS flag - Out of paper sensor
2
C2124-20008 Spring Limiter spring - Provides tension for rotation limiter
3
C4562-40022 Limiter Rotation limiter - Provides correct pressure to cap pen
4
C2162-20004 Spring Pivot spring - Provides tension for pivot to return to upright position
5
C2162-67806 Spring Preloader - Applies downward pressure on drive shaft
6
C2162-40036 Support Flex Support - Supports Flex Circuitry of Carriage Assembly
7
C2145-00017 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
8
C4549-67806 Roller Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
9
C2124-20001 Rail Rear rail - Supports carriage assembly
10
C2128-60018 Separator Separator pad assembly
11
C4562-40032 Bracket Belt tension bracket - Pivot bracket for idler pulley - Applies tension to the carriage belt
12
C2124-60162 Roller Upper pinch roller and spring assembly
13
C2124-00001 Spring Encoder spring - Provides tension for encoder strip
14
C2162-20005 Rod Carriage rod - Supports horizontal carriage movement
15
C2170-40002 Sensor Envelope sensor
16
C6450-80052 Absorber Spittoon sponge - located in bottom of spittoon
17
C4562-60043 Carriage Carriage assembly - Includes flex cable - Not for DeskJet 695CCI
17
C4562-60083 Carriage Carriage assembly for DeskJet 695CCI only - Includes flex cable
18
C6450-40011 Spitton Spittoon - Holds ink expelled from cartridge during refresh cycle
19
C2124-00009 Spring Spring - Installed in spittoon assembly
20
C2124-60116 Roller Lower pinch roller
21
C2164-40060 Belt Carriage belt for HP DeskJet 550C Series
22
C4549-60036 Plate Pressure Plate Assembly - Holds media to be printed against the Paper Input Feed Rollers
23
C2162-40105 Lever Switch lever - Actuates access door (Open) switch
24
C2162-40002 Gear Cluster gear for HP DeskJet 500 Series
25
C2162-40016 Hub Idler hub - Drive belt pivot point on left side of chassis
26
C4562-20003 Pin Idler pulley axel - Dowel pin for idler pulley
27
C2162-60009 Cable Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
28
C4562-60045 Service Station Service station assembly - Includes motor
29
C6450-60102 Sled Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges
30
C2124-80008 Strip Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
32
C2164-60045 Motor Paper stepper motor assembly (does NOT include cable)
33
C2124-60190 Motor Service station stepper motor (does not include cable) - Moves the rack vertically in the service station assembly
34
C2162-60006 Motor Carriage motor assembly (includes cable)
35
C4562-40009 Cap Paper width adjuster cap - Medium Purple
35
C4562-60046 Stop Paper width adjustment stop assembly - Adjusts for input paper width - Has medium purple cap
36
C2164-00015 Clip Carriage shaft retainer clip
12345
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.