C2145-40059 printer parts diagram.

123456
 

C2145-40059 is represented by #35 in the diagram below.

C2145-40059 is represented by #35 in the diagram below.
  • 1
    • 1 C4555-67803 - Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
  • 4
    • 4 C4531-69813 - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations - Used to replace all three types of print mechanisms
  • 9
    • 9 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
  • 10
    • 10 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
  • 13
  • 14
    • 14 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
  • 16
    • 16 C5876-60103 - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
  • 17
    • 17 C4531-60129 - Base assembly - Bottom cover with four rubber feet
  • 18
    • 18 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
  • 19
    • 19 C4531-60016 - Service station motor - Drives service station assembly
  • 21
    • 21 C4531-40011 - Carriage flex cable clip - Holds the flex cable
  • 22
    • 22 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
  • 23
    • 23 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 24
    • 24 C4555-40063 - Chassis clamp - Retains chassis in the base assembly
  • 25
    • 25 C4531-80010 - Head drive flex cable - 41.9cm (16.5in) long
  • 26
    • 26 C4531-67803 - Head drive PCA - Has temperature and optical sensors - Drives the print cartridge
  • 27
    • 27 C4531-40009 - Belt attachment - Anchors drive belt to carriage
  • 28
    • 28 C4555-60068 - Turnaround assembly - Holds belt tension components in place
  • 29
    • 29 C4531-60062 - Paper motor - Drives paper through printer - Has horizontal teeth (Not helical) on drive gear
  • 31
    • 31 C4555-67804 - Pivot - Large plastic item which contains the Pickup Rollers
  • 33
    • 33 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
  • 34
    • 34 C2145-00046 - Pivot spring - Provides tension for the pivot
  • 35
    • 35 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 36
    • 36 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
  • 37
    • 37 C2145-40058 - Drive belt - For the print mechanism carriage assembly
  • 38
    • 38 C2145-80016 - Encoder strip - Carriage position sensor reference
  • 39
    • 39 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears
  • 42
    • 42 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
  • 43
    • 43 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
  • 44
    • 44 C4602-60022 - Carriage motor - Provides power for carriage belt
1
C4555-67803 Chassis Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
2
C4555-40008 Flag Envelope sensor flag
3
C4555-40002 Gear Gear cluster (Dual gear)
4
C4531-69813 Print Mechanism Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations - Used to replace all three types of print mechanisms
5
C4555-60086 Separator Separator assembly
6
C4549-40029 Lifter Separator lifter
7
C2145-00044 Spring Carriage rod spring
8
C2124-60116 Roller Lower pinch roller
9
C2145-40019 Lifter Pressure plate lifter - Also known as lifter shaft or paper lifter
10
C2145-20007 Rod Carriage rod - Shaft that the carriage assembly rides on
12
C2145-40022 Link Separator link (Separator peg)
13
C2145-00037 Blade ESD blade for HP DeskJet 870C Series
14
C2145-40023 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
15
C2145-40118 Guide Pre-guide (For envelopes)
16
C5876-60103 Cable Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
17
C4531-60129 Base Base assembly - Bottom cover with four rubber feet
18
C2145-40020 Arm Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
19
C4531-60016 Motor Service station motor - Drives service station assembly
20
C2145-00044 Spring Carriage rod spring
21
C4531-40011 Clip Carriage flex cable clip - Holds the flex cable
22
C2145-00018 Spring Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
23
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
24
C4555-40063 Clamp Chassis clamp - Retains chassis in the base assembly
25
C4531-80010 Cable Head drive flex cable - 41.9cm (16.5in) long
26
C4531-67803 PC Board Head drive PCA - Has temperature and optical sensors - Drives the print cartridge
27
C4531-40009 Clamp Belt attachment - Anchors drive belt to carriage
28
C4555-60068 Turnaround Assembly Turnaround assembly - Holds belt tension components in place
29
C4531-60062 Motor Paper motor - Drives paper through printer - Has horizontal teeth (Not helical) on drive gear
30
C4555-00002 Ground Paper motor ground strap
31
C4555-67804 Pivot Pivot - Large plastic item which contains the Pickup Rollers
33
C2145-40101 Clamp Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
34
C2145-00046 Spring Pivot spring - Provides tension for the pivot
35
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
36
C4555-60067 Idler Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
37
C2145-40058 Belt Drive belt - For the print mechanism carriage assembly
38
C2145-80016 Strip Encoder strip - Carriage position sensor reference
39
C4555-40066 Arm Clutch actuator arm - Used to engage the pivot gears
40
C4555-40005 Guide Lower paper guide
41
C2145-40064 Flag OOPS flag - Out of paper sensor
42
C2145-00042 Stiffener Encoder stiffener - Prevents oscillation of encoder strip
43
C2145-40117 Clamp Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
44
C4602-60022 Shield Carriage motor - Provides power for carriage belt
123456
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.