C2145-00042 printer parts diagram.

1234567
 

C2145-00042 is represented by #36 in the diagram below.

C2145-00042 is represented by #36 in the diagram below.
  • 1
    • 1 C2145-69801 - Complete mechanism - Includes mechanical carriage movement, paper picking and service station operations
  • 7
    • 7 C2145-40019 - Pressure plate lifter - Also known as lifter shaft or paper lifter
  • 8
    • 8 C2145-20007 - Carriage rod - Shaft that the carriage assembly rides on
  • 12
    • 12 C2145-40020 - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
  • 13
    • 13 C2145-40023 - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
  • 14
  • 15
    • 15 C4555-60061 - Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
  • 18
    • 18 C2145-00018 - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
  • 19
    • 19 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 20
    • 20 C4531-40009 - Belt attachment - Anchors drive belt to carriage
  • 21
    • 21 C4555-40063 - Chassis clamp - Retains chassis in the base assembly
  • 23
    • 23 C2145-67804 - Pivot - Large plastic item which contains the pickup rollers
  • 24
    • 24 C4555-60068 - Turnaround assembly - Holds belt tension components in place
  • 25
    • 25 C2145-60010 - Paper drive motor - Drives paper through printer
  • 27
    • 27 C2145-40058 - Drive belt - For the print mechanism carriage assembly
  • 29
    • 29 C2145-40101 - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
  • 30
    • 30 C2145-00046 - Pivot spring - Provides tension for the pivot
  • 31
    • 31 C2145-40059 - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
  • 33
    • 33 C4555-60067 - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
  • 34
    • 34 C2145-80016 - Encoder strip - Carriage position sensor reference
  • 35
    • 35 C4555-40066 - Clutch actuator arm - Used to engage the pivot gears
  • 36
    • 36 C2145-00042 - Encoder stiffener - Prevents oscillation of encoder strip
  • 38
    • 38 C2145-40117 - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
1
C2145-69801 Print Mechanism Complete mechanism - Includes mechanical carriage movement, paper picking and service station operations
2
C4555-60086 Separator Separator assembly
3
C4549-40029 Lifter Separator lifter
4
C2145-00044 Spring Carriage rod spring
5
C2124-60116 Roller Lower pinch roller
7
C2145-40019 Lifter Pressure plate lifter - Also known as lifter shaft or paper lifter
8
C2145-20007 Rod Carriage rod - Shaft that the carriage assembly rides on
10
C2145-40022 Link Separator link (Separator peg)
11
C2145-60012 Motor Service station motor
12
C2145-40020 Arm Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
13
C2145-40023 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
14
C2145-00037 Blade ESD blade for HP DeskJet 870C Series
15
C4555-60061 Cable Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
16
C2145-40118 Guide Pre-guide (For envelopes)
17
C2145-00044 Spring Carriage rod spring
18
C2145-00018 Spring Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
19
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
20
C4531-40009 Clamp Belt attachment - Anchors drive belt to carriage
21
C4555-40063 Clamp Chassis clamp - Retains chassis in the base assembly
23
C2145-67804 Pivot Pivot - Large plastic item which contains the pickup rollers
24
C4555-60068 Turnaround Assembly Turnaround assembly - Holds belt tension components in place
25
C2145-60010 Motor Paper drive motor - Drives paper through printer
27
C2145-40058 Belt Drive belt - For the print mechanism carriage assembly
28
C2145-00054 Ground Paper motor ground strap
29
C2145-40101 Clamp Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
30
C2145-00046 Spring Pivot spring - Provides tension for the pivot
31
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
32
C2145-40052 Guide Lower paper guide
33
C4555-60067 Idler Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
34
C2145-80016 Strip Encoder strip - Carriage position sensor reference
35
C4555-40066 Arm Clutch actuator arm - Used to engage the pivot gears
36
C2145-00042 Stiffener Encoder stiffener - Prevents oscillation of encoder strip
37
C2145-40064 Flag OOPS flag - Out of paper sensor
38
C2145-40117 Clamp Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
39
C2145-60011 Motor Carriage motor assembly
1234567
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.