C2128-40055 printer parts diagram.

 

C2128-40055 is represented by #2 in the diagram below.

C2128-40055 is represented by #2 in the diagram below.
  • 1
    • 1 C4549-40028 - Lever arm - Used to lift the pressure plate lifter
  • 2
    • 2 C2128-40055 - PPS adjuster - Used to adjust the distance between the pivot and the pen
  • 3
  • 4
    • 4 C2128-40019 - Separator Peg - Lifts the separator pad when the lifter shaft lifts
  • 8
    • 8 C2162-60006 - Carriage motor assembly (includes cable)
  • 9
    • 9 C2145-00017 - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
  • 10
    • 10 C4562-60065 - Chassis assembly - The large plastic item that forms the base of the print mechanism
  • 11
    • 11 C4549-40006 - Lifter shaft - Plate like shaft that lifts the pressure plate
  • 12
    • 12 C2128-00006 - Separator spring - Provides pressure between the separator assembly and the center drive roller
  • 13
    • 13 C2170-00008 - Right bracket - Carriage rod adjustment bracket (Right)
  • 14
    • 14 C2128-40032 - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
  • 15
    • 15 C2128-00002 - Kicker spring - Provides tension for the kicker
  • 16
    • 16 C2128-40015 - Left lifter cap - Holds the pressure plate lifter in place
  • 17
    • 17 C2162-60009 - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
  • 18
    • 18 C2124-20008 - Limiter spring - Provides tension for rotation limiter
  • 19
    • 19 C4562-40022 - Rotation limiter - Provides correct pressure to cap pen
  • 21
    • 21 C2162-40105 - Switch lever - Actuates access door (Open) switch
  • 22
    • 22 C4549-40017 - Right wall stop - Maintains alignment of small media sizes in the input tray
    • 22 C4549-60036 - Pressure Plate Assembly - Holds media to be printed against the Paper Input Feed Rollers
  • 23
    • 23 C4549-67806 - Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
  • 24
    • 24 C2162-67802 - Paper width adjustment stop - Adjusts for input paper width
  • 25
    • 25 C4549-40027 - Clutch actuator - Pulls the clutch against the drive gear which starts the media picking process
  • 26
    • 26 C6450-40011 - Spittoon - Holds ink expelled from cartridge during refresh cycle
  • 27
    • 27 C2162-40002 - Cluster gear for HP DeskJet 500 Series
  • 28
    • 28 C2162-20004 - Pivot spring - Provides tension for pivot to return to upright position
  • 30
    • 30 C2124-00009 - Spring - Installed in spittoon assembly
  • 31
    • 31 C2162-60009 - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
  • 32
    • 32 C2162-67806 - Preloader - Applies downward pressure on drive shaft
  • 33
    • 33 C6450-60102 - Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges
  • 34
    • 34 C6450-80052 - Spittoon sponge - located in bottom of spittoon
  • 35
    • 35 C2124-20004 - Belt spring - For belt tension bracket
  • 36
    • 36 C2162-40036 - Flex Support - Supports Flex Circuitry of Carriage Assembly
  • 37
    • 37 C2164-60045 - Paper stepper motor assembly (does NOT include cable)
  • 38
    • 38 C2124-80008 - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
  • 39
    • 39 C2165-00001 - Left bracket - Carriage rod adjustment bracket (Left)
  • 41
    • 41 C4562-40032 - Belt tension bracket - Pivot bracket for idler pulley - Applies tension to the carriage belt
  • 42
    • 42 C2124-00001 - Encoder spring - Provides tension for encoder strip
  • 44
    • 44 C2162-40016 - Idler hub - Drive belt pivot point on left side of chassis
  • 46
    • 46 C2162-20005 - Carriage rod - Supports horizontal carriage movement
  • 47
    • 47 C2128-40020 - Kicker - Straightens the stack of media in the input tray so that the separator can function consistently
  • 48
    • 48 C2164-40060 - Carriage belt for HP DeskJet 550C Series
1
C4549-40028 Arm Lever arm - Used to lift the pressure plate lifter
2
C2128-40055 Adjuster PPS adjuster - Used to adjust the distance between the pivot and the pen
3
C2124-20001 Rail Rear rail - Supports carriage assembly
4
C2128-40019 Peg Separator Peg - Lifts the separator pad when the lifter shaft lifts
6
C2124-60116 Roller Lower pinch roller
7
C4549-40029 Lifter Separator lifter
8
C2162-60006 Motor Carriage motor assembly (includes cable)
9
C2145-00017 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
10
C4562-60065 Chassis Chassis assembly - The large plastic item that forms the base of the print mechanism
11
C4549-40006 Lifter Lifter shaft - Plate like shaft that lifts the pressure plate
12
C2128-00006 Spring Separator spring - Provides pressure between the separator assembly and the center drive roller
13
C2170-00008 Bracket Right bracket - Carriage rod adjustment bracket (Right)
14
C2128-40032 Cap Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
15
C2128-00002 Spring Kicker spring - Provides tension for the kicker
16
C2128-40015 Cap Left lifter cap - Holds the pressure plate lifter in place
17
C2162-60009 Cable Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
18
C2124-20008 Spring Limiter spring - Provides tension for rotation limiter
19
C4562-40022 Limiter Rotation limiter - Provides correct pressure to cap pen
21
C2162-40105 Lever Switch lever - Actuates access door (Open) switch
22
C4549-40017 Stop Right wall stop - Maintains alignment of small media sizes in the input tray
22
C4549-60036 Plate Pressure Plate Assembly - Holds media to be printed against the Paper Input Feed Rollers
23
C4549-67806 Roller Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
24
C2162-67802 Stop Paper width adjustment stop - Adjusts for input paper width
25
C4549-40027 Actuator Clutch actuator - Pulls the clutch against the drive gear which starts the media picking process
26
C6450-40011 Spitton Spittoon - Holds ink expelled from cartridge during refresh cycle
27
C2162-40002 Gear Cluster gear for HP DeskJet 500 Series
28
C2162-20004 Spring Pivot spring - Provides tension for pivot to return to upright position
30
C2124-00009 Spring Spring - Installed in spittoon assembly
31
C2162-60009 Cable Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
32
C2162-67806 Spring Preloader - Applies downward pressure on drive shaft
33
C6450-60102 Sled Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges
34
C6450-80052 Absorber Spittoon sponge - located in bottom of spittoon
35
C2124-20004 Spring Belt spring - For belt tension bracket
36
C2162-40036 Support Flex Support - Supports Flex Circuitry of Carriage Assembly
37
C2164-60045 Motor Paper stepper motor assembly (does NOT include cable)
38
C2124-80008 Strip Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
39
C2165-00001 Bracket Left bracket - Carriage rod adjustment bracket (Left)
40
C2128-60018 Separator Separator pad assembly
41
C4562-40032 Bracket Belt tension bracket - Pivot bracket for idler pulley - Applies tension to the carriage belt
42
C2124-00001 Spring Encoder spring - Provides tension for encoder strip
43
C2164-00015 Clip Carriage shaft retainer clip
44
C2162-40016 Hub Idler hub - Drive belt pivot point on left side of chassis
46
C2162-20005 Rod Carriage rod - Supports horizontal carriage movement
47
C2128-40020 Kicker Kicker - Straightens the stack of media in the input tray so that the separator can function consistently
48
C2164-40060 Belt Carriage belt for HP DeskJet 550C Series
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.