0950-2623 printer parts diagram.

0950-2623 is represented by #13 in the diagram below.

• 1
  • 1 C4705-60092 - Electronic housing assembly (PC board enclosure)

• 2
  • 2 C3195-60056 - Power supply cable - Has 12-pin (F) connectors - 9.5cm (3.7in) long

• 3
  • 3 C3195-60057 - Ribbon cable assembly (Black) - Contains a 12 wire 82.6cm (32.5in) cable and a 14 wire 96.5cm (38in) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked 'SVS', 'Bail', and 'Primer', a 4-pin (F), and a 4-pin (M)

• 4
  • 4 C4704-40050 - SIMM module shield
  • 4 C4705-60088 - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier

• 5
  • 5 C3190-60137 - Tubeaxial fan for HP DesignJet 750C Series

• 6
  • 6 C3195-80005 - RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing

• 7
  • 7 C3195-00009 - SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly

• 8
  • 8 C3195-60053 - Back cover/panel - Metal cover for the electronic enclosure assembly

• 9
  • 9 C4708-69001 - Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports

• 10
  • 10 C1633-00031 - MIO slot access cover

• 11
  • 11 C3195-80009 - Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.

• 12
  • 12 J2382-69003 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
  • 12 J2550-69013 - EtherTwist 10Base-T LAN interface board
  • 12 J2555-69013 - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
  • 12 J2555B - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
  • 12 J2590-69001 - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
  • 12 J2590A - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
  • 12 J2591-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
  • 12 J2592-69001 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
  • 12 J3258-61021 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
  • 12 J3258B - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
  • 12 J4100-69001 - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
  • 12 J4102-69022 - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
  • 12 J4102B - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
  • 12 J4106A - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector

• 13
  • 13 0950-2623 - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker

• 14
  • 14 C3190-00016 - Insulator - Mounts between the power supply and main cover/panel of the electronic enclosure assembly

• 15
  • 15 C3195-60149 - AC wiring harness - Includes power switch, AC receptacle, and connector