|
Absorber
|
0
D7Z36A-Absorber
|
D7Z36A-Absorber
#Absorber,#Parts,#D7Z36A-Absorber
Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
|
|
AC Adapter
|
|
0
D7Z36A-AC_Adapter
|
D7Z36A-AC_Adapter
#AC Adapter,#Parts,#D7Z36A-AC_Adapter
Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
|
|
Accessory
|
102744
A7F64-60043
|
A7F64-60043
#Accessory,#Parts,#A7F64-60043
Duplex Unit HP OfficeJet Pro 8610 8615 8620 Duplexer. Bulkpack Assy-Buck X (Duplexer)
|
|
0
A8Z70-60001
|
A8Z70-60001
#Accessory,#Parts,#A8Z70-60001
2nd tray assembly Ohm Bulkpack Assy HP officejet pro 8600 series.
|
|
Actuator
|
|
0
D7Z36A-Actuator
|
D7Z36A-Actuator
#Actuator,#Parts,#D7Z36A-Actuator
Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
|
|
ADF Arm
|
|
0
D7Z36A-ADF_Arm
|
D7Z36A-ADF_Arm
#ADF Arm,#Parts,#D7Z36A-ADF_Arm
Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
|
|
ADF Feed Assembly
|
|
0
D7Z36A-ADF_Feed_Assy
|
D7Z36A-ADF_Feed_Assy
#ADF Feed Assembly,#Parts,#D7Z36A-ADF_Feed_Assy
ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
|
|
Adf Input Tray
|
|
0
D7Z36A-ADF_Input_Tray
|
D7Z36A-ADF_Input_Tray
#Adf Input Tray,#Parts,#D7Z36A-ADF_Input_Tray
ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
|
|
ADF Motor
|
|
0
D7Z36A-ADF_Motor
|
D7Z36A-ADF_Motor
#ADF Motor,#Parts,#D7Z36A-ADF_Motor
ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
|
|
ADF Out Put Tray
|
|
0
D7Z36A-ADF_Output_Tray
|
D7Z36A-ADF_Output_Tray
#ADF Out Put Tray,#Parts,#D7Z36A-ADF_Output_Tray
ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
|
|
ADF Pad
|
|
0
D7Z36A-ADF_Pad
|
D7Z36A-ADF_Pad
#ADF Pad,#Parts,#D7Z36A-ADF_Pad
ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
|
|
ADF PC Board
|
|
0
D7Z36A-ADF_PC_BRD
|
D7Z36A-ADF_PC_BRD
#ADF PC Board,#Parts,#D7Z36A-ADF_PC_BRD
Control Board on the ADF unit
|
|
ADF Roller Kit
|
|
0
D7Z36A-ADF_Roller_Kit
|
D7Z36A-ADF_Roller_Kit
#ADF Roller Kit,#Parts,#D7Z36A-ADF_Roller_Kit
ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
|
|
ADF Scanner
|
|
0
D7Z36A-ADF_Scanner
|
D7Z36A-ADF_Scanner
#ADF Scanner,#Parts,#D7Z36A-ADF_Scanner
ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
|
|
ADF Sensor Board
|
|
0
D7Z36A-ADF_Sensor_BRD
|
D7Z36A-ADF_Sensor_BRD
#ADF Sensor Board,#Parts,#D7Z36A-ADF_Sensor_BRD
ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
|
|
ADF Unit Assembly
|
|
0
D7Z36A-ADF_Unit_Assy
|
D7Z36A-ADF_Unit_Assy
#ADF Unit Assembly,#Parts,#D7Z36A-ADF_Unit_Assy
Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
|
|
Arm Delivery
|
|
0
D7Z36A-Arm_Delivery
|
D7Z36A-Arm_Delivery
#Arm Delivery,#Parts,#D7Z36A-Arm_Delivery
Paper sensing arm - for 'paper out' or delivering paper sensing arm
|
|
Arm Door
|
|
0
D7Z36A-Arm_Door
|
D7Z36A-Arm_Door
#Arm Door,#Parts,#D7Z36A-Arm_Door
Carriage access door sensor arm
|
|
Arm Pick Up
|
|
0
D7Z36A-Arm_Pickup
|
D7Z36A-Arm_Pickup
#Arm Pick Up,#Parts,#D7Z36A-Arm_Pickup
Paper detection arm - for registration plate on picking up paper
|
|
Arm Plate
|
|
0
D7Z36A-Arm_Plate
|
D7Z36A-Arm_Plate
#Arm Plate,#Parts,#D7Z36A-Arm_Plate
Lever arm - used to lift the pressure plate lifter
|
|
Arm Sensing
|
|
0
D7Z36A-Arm_Sensing
|
D7Z36A-Arm_Sensing
#Arm Sensing,#Parts,#D7Z36A-Arm_Sensing
Arm assembly senses paper in bottom tray
|
|
Arm Tension
|
|
0
D7Z36A-Arm_Tension
|
D7Z36A-Arm_Tension
#Arm Tension,#Parts,#D7Z36A-Arm_Tension
Tension arm - maintains tension on carriage belt
|
|
Battery
|
|
0
D7Z36A-Battery
|
D7Z36A-Battery
#Battery,#Parts,#D7Z36A-Battery
Battery pack for hp printer
|
|
Belt ADF
|
|
0
D7Z36A-Belt_ADF
|
D7Z36A-Belt_ADF
#Belt ADF,#Parts,#D7Z36A-Belt_ADF
Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
|
|
Belt Carriage
|
|
0
D7Z36A-Belt_Carriage
|
D7Z36A-Belt_Carriage
#Belt Carriage,#Parts,#D7Z36A-Belt_Carriage
Carriage belt - moves the carriage assembly across the carriage rod
|
|
Belt Duplex
|
|
0
D7Z36A-Belt_Duplex
|
D7Z36A-Belt_Duplex
#Belt Duplex,#Parts,#D7Z36A-Belt_Duplex
Duplex timing belt - small belt that goes on the duplexer unit
|
|
Belt Paper
|
|
0
D7Z36A-Belt_Paper
|
D7Z36A-Belt_Paper
#Belt Paper,#Parts,#D7Z36A-Belt_Paper
Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
|
|
Belt Scanner
|
|
0
D7Z36A-Belt_Scanner
|
D7Z36A-Belt_Scanner
#Belt Scanner,#Parts,#D7Z36A-Belt_Scanner
Scanner assembly belt. belt moves the scanner while copying or scanning documents.
|
|
Bezel
|
|
0
D7Z36A-Bezel
|
D7Z36A-Bezel
#Bezel,#Parts,#D7Z36A-Bezel
Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
|
|
Bracket Left
|
|
0
D7Z36A-Bracket_Left
|
D7Z36A-Bracket_Left
#Bracket Left,#Parts,#D7Z36A-Bracket_Left
Left bracket - carriage rod adjustment bracket (left)
|
|
Bracket Right
|
|
0
D7Z36A-Bracket_Right
|
D7Z36A-Bracket_Right
#Bracket Right,#Parts,#D7Z36A-Bracket_Right
Right bracket - carriage rod adjustment bracket (right)
|
|
Bracket Tension
|
|
0
D7Z36A-Bracket_Tension
|
D7Z36A-Bracket_Tension
#Bracket Tension,#Parts,#D7Z36A-Bracket_Tension
Belt tension bracket - holds the carriage belt idler pulley
|
|
Cable
|
|
9791
8120-8905
|
8120-8905
#Cable,#Parts,#8120-8905
Ethernet cable assembly (Black) - Cat-5e, 3m (9.8ft) long
|
|
102531
8121-0811
|
8121-0811
View Parts Diagram/s
#Cable,#Parts,#8121-0811
Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
|
|
101818
8121-0868
|
8121-0868
#Cable,#Parts,#8121-0868
Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
|
|
0
8121-1585
|
8121-1585
#Cable,#Parts,#8121-1585
Cable Assy Usb A-B 1.5-M-Lg Black
|
|
20850
C8975-80020
|
C8975-80020
#Cable,#Parts,#C8975-80020
Ethernet cable - Category 5 (Cat5e) - 2m (6.5ft) long
|
|
Cable Carriage
|
|
0
D7Z36A-Cable_Carriage
|
D7Z36A-Cable_Carriage
#Cable Carriage,#Parts,#D7Z36A-Cable_Carriage
Cable assembly which connects the main logic board to the carriage motor
|
|
Cable Interface
|
|
0
D7Z36A-Cable_Interface
|
D7Z36A-Cable_Interface
#Cable Interface,#Parts,#D7Z36A-Cable_Interface
Parallel cable - connects from your printer to computer via your parallel port.
|
|
Cable Mechanism
|
|
0
D7Z36A-Cable_Mchnsm
|
D7Z36A-Cable_Mchnsm
#Cable Mechanism,#Parts,#D7Z36A-Cable_Mchnsm
Cable assembly which connects the main logic board to the print mechanism
|
|
Cable Panel
|
|
0
D7Z36A-Cable_Panel
|
D7Z36A-Cable_Panel
#Cable Panel,#Parts,#D7Z36A-Cable_Panel
Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
|
|
Cable USB
|
|
0
D7Z36A-Cable_USB
|
D7Z36A-Cable_USB
#Cable USB,#Parts,#D7Z36A-Cable_USB
This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
|
|
Cam
|
|
0
D7Z36A-Cam
|
D7Z36A-Cam
#Cam,#Parts,#D7Z36A-Cam
Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
|
|
Cap Lifter
|
|
0
D7Z36A-Cap_Lifter
|
D7Z36A-Cap_Lifter
#Cap Lifter,#Parts,#D7Z36A-Cap_Lifter
These lifter caps hold the pressure plate lifter and the kicker spring in place.
|
|
Carriage Assembly
|
|
0
D7Z36A-Carriage_Assy
|
D7Z36A-Carriage_Assy
#Carriage Assembly,#Parts,#D7Z36A-Carriage_Assy
Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
|
|
Carriage Base
|
|
0
D7Z36A-Carriage_Base
|
D7Z36A-Carriage_Base
#Carriage Base,#Parts,#D7Z36A-Carriage_Base
Carriage base or pre-loader assembly - mounted to bottom of carriage base
|
|
Carriage Belt
|
|
0
D7Z36A-Carriage_Belt
|
D7Z36A-Carriage_Belt
#Carriage Belt,#Parts,#D7Z36A-Carriage_Belt
Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
|
|
Carriage Cable
|
|
0
D7Z36A-Carriage_Cable
|
D7Z36A-Carriage_Cable
#Carriage Cable,#Parts,#D7Z36A-Carriage_Cable
Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
|
|
Carriage Latch
|
|
0
D7Z36A-Carriage_Latch
|
D7Z36A-Carriage_Latch
#Carriage Latch,#Parts,#D7Z36A-Carriage_Latch
A-arm latch - retains latch over the printheads on the carriage
|
|
Carriage Latch Cover
|
|
0
D7Z36A-Carriage_Latch_CVR
|
D7Z36A-Carriage_Latch_CVR
#Carriage Latch Cover,#Parts,#D7Z36A-Carriage_Latch_CVR
The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
|
|
Carriage Motor
|
|
0
D7Z36A-Carriage_Motor
|
D7Z36A-Carriage_Motor
#Carriage Motor,#Parts,#D7Z36A-Carriage_Motor
Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
|
|
Carriage Only
|
|
0
D7Z36A-Carriage_Only
|
D7Z36A-Carriage_Only
#Carriage Only,#Parts,#D7Z36A-Carriage_Only
Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
|
|
Carriage PC Board
|
|
0
D7Z36A-Carriage_PC_BRD
|
D7Z36A-Carriage_PC_BRD
#Carriage PC Board,#Parts,#D7Z36A-Carriage_PC_BRD
This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
|
|
Chassis
|
|
0
D7Z36A-Chassis
|
D7Z36A-Chassis
#Chassis,#Parts,#D7Z36A-Chassis
Chassis assembly - the large plastic item that forms the base of the print mechanism
|
|
Clutch ADF
|
|
0
D7Z36A-Clutch_ADF
|
D7Z36A-Clutch_ADF
#Clutch ADF,#Parts,#D7Z36A-Clutch_ADF
ADF paper clutch unit. clutch that controls movement on the ADF feeder
|
|
Clutch Feed
|
|
0
D7Z36A-Clutch_Feed
|
D7Z36A-Clutch_Feed
#Clutch Feed,#Parts,#D7Z36A-Clutch_Feed
Clutch unit resposible for unit picking up paper from the pick up unit.
|
|
Control Panel
|
|
109771
A7f64-60058
|
A7f64-60058
#Control Panel,#Parts,#A7f64-60058
HP Officejet Pro 8610 8615 Printer Control Panel with Display Screen
|
|
0
D7Z36A-Control_Panel
|
D7Z36A-Control_Panel
#Control Panel,#Parts,#D7Z36A-Control_Panel
Control panel assembly - control buttons and display on top front of the unit.
|
|
Cover Back
|
|
0
D7Z36A-Cover_Back
|
D7Z36A-Cover_Back
#Cover Back,#Parts,#D7Z36A-Cover_Back
Back cover of printer, it is usually removed to clear paper jams.
|
|
Cover Cartridge
|
|
0
D7Z36A-Cover_Cartridge
|
D7Z36A-Cover_Cartridge
#Cover Cartridge,#Parts,#D7Z36A-Cover_Cartridge
This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
|
|
Cover Main
|
|
0
D7Z36A-Cover_Main
|
D7Z36A-Cover_Main
#Cover Main,#Parts,#D7Z36A-Cover_Main
This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
|
|
Deflector
|
|
0
D7Z36A-Deflector
|
D7Z36A-Deflector
#Deflector,#Parts,#D7Z36A-Deflector
Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
|
|
Display
|
|
0
D7Z36A-Display
|
D7Z36A-Display
#Display,#Parts,#D7Z36A-Display
Status led display (LCD display assembly).
|
|
Door Carriage
|
|
0
D7Z36A-Door_Carriage
|
D7Z36A-Door_Carriage
#Door Carriage,#Parts,#D7Z36A-Door_Carriage
Main front access door - covers the top of the printer and provide access to the carriage when open.
|
|
Door Cartridge
|
|
0
D7Z36A-Door_Cartridge
|
D7Z36A-Door_Cartridge
#Door Cartridge,#Parts,#D7Z36A-Door_Cartridge
Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
|
|
Door Rear
|
|
0
D7Z36A-Door_Rear
|
D7Z36A-Door_Rear
#Door Rear,#Parts,#D7Z36A-Door_Rear
Rear cleanout door assembly - rear paper jam clean out door assembly.
|
|
Drive Assembly
|
|
0
D7Z36A-Drive_Assy
|
D7Z36A-Drive_Assy
#Drive Assembly,#Parts,#D7Z36A-Drive_Assy
Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
|
|
Drive Assy ADF
|
|
0
D7Z36A-Drive_Assy_ADF
|
D7Z36A-Drive_Assy_ADF
#Drive Assy ADF,#Parts,#D7Z36A-Drive_Assy_ADF
Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
|
|
Duplexer
|
|
0
D7Z36A-Duplexer
|
D7Z36A-Duplexer
#Duplexer,#Parts,#D7Z36A-Duplexer
Auto duplexer assembly - provides double sided printing capability
|
|
Encoder
|
|
0
D7Z36A-Encoder
|
D7Z36A-Encoder
#Encoder,#Parts,#D7Z36A-Encoder
Encoder spring - provides tension for encoder strip
|
|
Encoder Disk
|
|
0
D7Z36A-Encoder_Disk
|
D7Z36A-Encoder_Disk
#Encoder Disk,#Parts,#D7Z36A-Encoder_Disk
Disk encoder - helps to provide position information of the paper
|
|
Encoder Strip
|
|
0
D7Z36A-Encoder_Strip
|
D7Z36A-Encoder_Strip
#Encoder Strip,#Parts,#D7Z36A-Encoder_Strip
Encoder strip - carriage position sensor reference
|
|
Extender ADF
|
|
0
D7Z36A-Extender_ADF
|
D7Z36A-Extender_ADF
#Extender ADF,#Parts,#D7Z36A-Extender_ADF
Paper extension for the automatic document feeder (ADF) input tray
|
|
Extender Input
|
|
0
D7Z36A-Extender_Input
|
D7Z36A-Extender_Input
#Extender Input,#Parts,#D7Z36A-Extender_Input
Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
|
|
Extender Output
|
|
0
D7Z36A-Extender_Output
|
D7Z36A-Extender_Output
#Extender Output,#Parts,#D7Z36A-Extender_Output
Paper exit tray extension
|
|
Fan PC Board
|
|
0
D7Z36A-Fan_PC_BRD
|
D7Z36A-Fan_PC_BRD
#Fan PC Board,#Parts,#D7Z36A-Fan_PC_BRD
Fan to cool power supply unit
|
|
Fan Vaccum
|
|
0
D7Z36A-Fan_Vaccum
|
D7Z36A-Fan_Vaccum
#Fan Vaccum,#Parts,#D7Z36A-Fan_Vaccum
Vacuum fan assembly
|
|
Feed Rollers
|
|
0
D7Z36A-Feed_Rollers
|
D7Z36A-Feed_Rollers
#Feed Rollers,#Parts,#D7Z36A-Feed_Rollers
Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
|
|
Feed Rollers ADF
|
|
0
D7Z36A-Feed_Rollers_ADF
|
D7Z36A-Feed_Rollers_ADF
#Feed Rollers ADF,#Parts,#D7Z36A-Feed_Rollers_ADF
ADF feed roller kit - includes all rollers that feed paper through the feeder.
|
|
Flag ADF
|
|
0
D7Z36A-Flag_ADF
|
D7Z36A-Flag_ADF
#Flag ADF,#Parts,#D7Z36A-Flag_ADF
Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
|
|
Flag Paper
|
|
0
D7Z36A-Flag_Paper
|
D7Z36A-Flag_Paper
#Flag Paper,#Parts,#D7Z36A-Flag_Paper
OOPS flag - out of paper sensor
|
|
Formatter
|
|
0
D7Z36A-Formatter
|
D7Z36A-Formatter
#Formatter,#Parts,#D7Z36A-Formatter
Formatter board assembly, this board communicates with your computer device and has MAC port connector.
|
|
Front Panel
|
|
0
D7Z36A-Front_Panel
|
D7Z36A-Front_Panel
#Front Panel,#Parts,#D7Z36A-Front_Panel
Front panel assembly - includes lcd and actuator buttons
|
|
Gear Assembly
|
|
0
D7Z36A-Gear_Assy
|
D7Z36A-Gear_Assy
#Gear Assembly,#Parts,#D7Z36A-Gear_Assy
ADF gear assembly driven by ADF main motor
|
|
Gear Cluster
|
|
0
D7Z36A-Gear_Cluster
|
D7Z36A-Gear_Cluster
#Gear Cluster,#Parts,#D7Z36A-Gear_Cluster
Cluster gear, large gear on service station
|
|
Gear Double
|
|
0
D7Z36A-Gear_Double
|
D7Z36A-Gear_Double
#Gear Double,#Parts,#D7Z36A-Gear_Double
Transfer gear - has double gear attached on service station
|
|
Gear Main
|
|
0
D7Z36A-Gear_Main
|
D7Z36A-Gear_Main
#Gear Main,#Parts,#D7Z36A-Gear_Main
Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
|
|
Gear Station
|
|
0
D7Z36A-Gear_Station
|
D7Z36A-Gear_Station
#Gear Station,#Parts,#D7Z36A-Gear_Station
Gears on shaft of spittoon station
|
|
Glass ADF Window
|
|
0
D7Z36A-Glass_ADF_Window
|
D7Z36A-Glass_ADF_Window
#Glass ADF Window,#Parts,#D7Z36A-Glass_ADF_Window
Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.
|
|
Glass Assembly
|
|
0
D7Z36A-Glass_Assy
|
D7Z36A-Glass_Assy
#Glass Assembly,#Parts,#D7Z36A-Glass_Assy
Main top copier glass assembly.
|
|
Guide Paper
|
|
0
D7Z36A-Guide_Paper
|
D7Z36A-Guide_Paper
#Guide Paper,#Parts,#D7Z36A-Guide_Paper
Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
|
|
Hinge
|
|
0
D7Z36A-Hinge_Cvr
|
D7Z36A-Hinge_Cvr
#Hinge,#Parts,#D7Z36A-Hinge_Cvr
Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
|
|
Holder
|
|
0
D7Z36A-Holder
|
D7Z36A-Holder
#Holder,#Parts,#D7Z36A-Holder
Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
|
|
Idler
|
|
0
D7Z36A-Idler
|
D7Z36A-Idler
#Idler,#Parts,#D7Z36A-Idler
Scanner belt idler assembly - maintains scannter belt tension.
|
|
Ink Delivery System
|
|
0
D7Z36A-Ink_DLVRY
|
D7Z36A-Ink_DLVRY
#Ink Delivery System,#Parts,#D7Z36A-Ink_DLVRY
RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
|
|
Ink Supply Station
|
|
0
D7Z36A-Ink_Supply_Station
|
D7Z36A-Ink_Supply_Station
#Ink Supply Station,#Parts,#D7Z36A-Ink_Supply_Station
Ink supply service station (iss) assembly
|
|
Ink System
|
|
0
HP950-951
|
HP950-951
#Ink System,#Supplies,#HP950-951
950-951 Setup ink cartridge for officejet Pro 8610 8620 8630 8640 8660 8615 8625 4 Pack (Black Cyan Magenta Yellow)
|
|
Kit
|
|
108606
CM751-60013
|
CM751-60013
#Kit,#Supplies,#CM751-60013
PRINTHEAD KIT FOR 950/951 PRO OFFICEJET 8100/8600/8700 Na/La Whaler Replacement Kit OEM includes set pens. (Pha Setup Carts Inst.)
|
|
Lid Cover Assy
|
|
0
D7Z36A-Lid_Cover_Assy
|
D7Z36A-Lid_Cover_Assy
#Lid Cover Assy,#Parts,#D7Z36A-Lid_Cover_Assy
Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.
|
|
Manual
|
|
0
A7F64-90016
|
A7F64-90016
#Manual,#Media,#A7F64-90016
MNL: GSG-EN/FR/ES/PT
|
|
Motor ADF
|
|
0
D7Z36A-Motor_ADF
|
D7Z36A-Motor_ADF
#Motor ADF,#Parts,#D7Z36A-Motor_ADF
ADF motor unit - drives ADF rollers on the feeder assembly
|
|
Motor Carriage
|
|
0
D7Z36A-Motor_Carriage
|
D7Z36A-Motor_Carriage
#Motor Carriage,#Parts,#D7Z36A-Motor_Carriage
Carriage motor - motor that drives the carriage assembly
|
|
Motor Scanner
|
|
0
D7Z36A-Motor_Scanner
|
D7Z36A-Motor_Scanner
#Motor Scanner,#Parts,#D7Z36A-Motor_Scanner
Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
|
|
Motor Service Station
|
|
0
D7Z36A-MTR_Srvce_Station
|
D7Z36A-MTR_Srvce_Station
#Motor Service Station,#Parts,#D7Z36A-MTR_Srvce_Station
Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
|
|
Overlay
|
|
0
D7Z36A-Overlay
|
D7Z36A-Overlay
#Overlay,#Parts,#D7Z36A-Overlay
Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
|
|
Pad ADF
|
|
0
D7Z36A-Pad_ADF
|
D7Z36A-Pad_ADF
#Pad ADF,#Parts,#D7Z36A-Pad_ADF
Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
|
|
Pad Tray
|
|
0
D7Z36A-Pad_Tray
|
D7Z36A-Pad_Tray
#Pad Tray,#Parts,#D7Z36A-Pad_Tray
Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
|
|
Paper
|
|
0
A7F64-90015
|
A7F64-90015
#Paper,#Media,#A7F64-90015
MNL: Setup Poster –Worldwide 8610
|
|
PC Board
|
|
0
D7Z36A-PC_BRD
|
D7Z36A-PC_BRD
#PC Board,#Parts,#D7Z36A-PC_BRD
Ink cartridge carriage assembly pc board - includes carriage pc board only
|
|
PC Board DC
|
|
0
D7Z36A-PC_BRD_DC
|
D7Z36A-PC_BRD_DC
#PC Board DC,#Parts,#D7Z36A-PC_BRD_DC
Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
|
|
Pinchwheel
|
|
0
D7Z36A-Pinchwheel
|
D7Z36A-Pinchwheel
#Pinchwheel,#Parts,#D7Z36A-Pinchwheel
Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
|
|
Power Cord
|
|
9578
8120-6313
|
8120-6313
View Parts Diagram/s
#Power Cord,#Parts,#8120-6313
Power cord (Black) - 18 AWG two conductor 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 110-120VAC in the United States Canada Mexico Latin America and Taiwan)
|
9580
8120-6314
|
8120-6314
View Parts Diagram/s
#Power Cord,#Parts,#8120-6314
Power cord (Black) - 18 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South America, Switzerland, Denmark, Netherlands, and France)
|
|
0
D7Z36A-Power_Cord
|
D7Z36A-Power_Cord
#Power Cord,#Parts,#D7Z36A-Power_Cord
Power module power cord- wall outlet cable to power module only. does not include power module.
|
|
Power Module
|
|
0
D7Z36A-Power_MDLE
|
D7Z36A-Power_MDLE
#Power Module,#Parts,#D7Z36A-Power_MDLE
World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
|
|
Power Module Assy
|
|
0
D7Z36A-Power_MDLE_Assy
|
D7Z36A-Power_MDLE_Assy
#Power Module Assy,#Parts,#D7Z36A-Power_MDLE_Assy
World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
|
|
Power Supply
|
|
0
D7Z36A-Power_Supply
|
D7Z36A-Power_Supply
#Power Supply,#Parts,#D7Z36A-Power_Supply
Power supply board (internal pwr supply unit in the office machine).
|
|
Power Supply Board
|
|
0
D7Z36A-Power_Supply_BRD
|
D7Z36A-Power_Supply_BRD
#Power Supply Board,#Parts,#D7Z36A-Power_Supply_BRD
High voltage power supply board
|
|
Print Mechanism
|
|
0
D7Z36A-Print_Mchnsm
|
D7Z36A-Print_Mchnsm
#Print Mechanism,#Parts,#D7Z36A-Print_Mchnsm
Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
|
|
Printhead
|
|
104135
CR321A
|
CR321A
#Printhead,#Supplies,#CR321A
Na/La Iw Whaler Rplcmnt Kit (Pha Host Cart.) 4-slot Printhead and Complete Set of Ink Cartridges Bundle Pack ( 950/951 Ink and Printhead Bundle Pack).
|
|
104136
CR323A
|
CR323A
#Printhead,#Supplies,#CR323A
Emea Iw Whaler Rplcmnt Kit (Pha Host Cart.)
|
|
Pulley
|
|
0
D7Z36A-Pulley
|
D7Z36A-Pulley
#Pulley,#Parts,#D7Z36A-Pulley
Paper pick up tray motor pulley.
|
|
Pulley ADF
|
|
0
D7Z36A-Pulley_ADF
|
D7Z36A-Pulley_ADF
#Pulley ADF,#Parts,#D7Z36A-Pulley_ADF
ADF feeder motor pulley
|
|
Rod Carriage
|
|
0
D7Z36A-Rod_Carriage
|
D7Z36A-Rod_Carriage
#Rod Carriage,#Parts,#D7Z36A-Rod_Carriage
Carriage rod - shaft that the carriage assembly rides on
|
|
Rod Scanner
|
|
0
D7Z36A-Rod_Scanner
|
D7Z36A-Rod_Scanner
#Rod Scanner,#Parts,#D7Z36A-Rod_Scanner
Scanner rod - shaft that the scanner assembly rides on
|
|
Roller ADF
|
|
0
D7Z36A-Roller_ADF
|
D7Z36A-Roller_ADF
#Roller ADF,#Parts,#D7Z36A-Roller_ADF
Feeder ADF roller for picking up paper from ADF unit.
|
|
Roller Exit
|
|
0
D7Z36A-Roller_Exit
|
D7Z36A-Roller_Exit
#Roller Exit,#Parts,#D7Z36A-Roller_Exit
Paper exit rollers - out put assembly.
|
|
Roller Pickup
|
|
0
D7Z36A-Roller_Pickup
|
D7Z36A-Roller_Pickup
#Roller Pickup,#Parts,#D7Z36A-Roller_Pickup
Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
|
|
Scanner
|
|
0
D7Z36A-Scanner
|
D7Z36A-Scanner
#Scanner,#Parts,#D7Z36A-Scanner
Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
|
|
Scanner Assembly
|
|
0
D7Z36A-Scanner_Assy
|
D7Z36A-Scanner_Assy
#Scanner Assembly,#Parts,#D7Z36A-Scanner_Assy
Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
|
|
Scanner Belt
|
|
0
D7Z36A-Scanner_Belt
|
D7Z36A-Scanner_Belt
#Scanner Belt,#Parts,#D7Z36A-Scanner_Belt
Scanner belt attaches from the scanner to the scanner motor.
|
|
Scanner Cable
|
|
0
D7Z36A-Scanner_Cable
|
D7Z36A-Scanner_Cable
#Scanner Cable,#Parts,#D7Z36A-Scanner_Cable
Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
|
|
Scanner Motor
|
|
0
D7Z36A-Scanner_Motor
|
D7Z36A-Scanner_Motor
#Scanner Motor,#Parts,#D7Z36A-Scanner_Motor
Scanner driving motor
|
|
Scanner Unit
|
|
0
D7Z36A-Scanner_Unit
|
D7Z36A-Scanner_Unit
#Scanner Unit,#Parts,#D7Z36A-Scanner_Unit
Scanner unit includes the entire scanner base but not the ADF portion.
|
|
Sensor ADF
|
|
0
D7Z36A-Sensor_ADF
|
D7Z36A-Sensor_ADF
#Sensor ADF,#Parts,#D7Z36A-Sensor_ADF
Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
|
|
Sensor Exit
|
|
0
D7Z36A-Sensor_Exit
|
D7Z36A-Sensor_Exit
#Sensor Exit,#Parts,#D7Z36A-Sensor_Exit
Exit media sensor sv
|
|
Sensor Open
|
|
0
D7Z36A-Sensor_Open
|
D7Z36A-Sensor_Open
#Sensor Open,#Parts,#D7Z36A-Sensor_Open
Door sensor assembly - open door sensor
|
|
Sensor Out
|
|
0
D7Z36A-Sensor_Out
|
D7Z36A-Sensor_Out
#Sensor Out,#Parts,#D7Z36A-Sensor_Out
OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
|
|
Sensor Spot
|
|
0
D7Z36A-Sensor_Spot
|
D7Z36A-Sensor_Spot
#Sensor Spot,#Parts,#D7Z36A-Sensor_Spot
Spot sensor assembly is attached to the carriage assembly.
|
|
Separator
|
|
0
D7Z36A-Separator
|
D7Z36A-Separator
#Separator,#Parts,#D7Z36A-Separator
Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
|
|
Service Guide
|
|
0
D7Z36A-Guide
|
D7Z36A-Guide
#Service Guide,#Service Guide,#D7Z36A-Guide
Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
|
|
Service Station
|
|
0
D7Z36A-Service_Station
|
D7Z36A-Service_Station
#Service Station,#Parts,#D7Z36A-Service_Station
Service station assembly - for conditioning the printheads when the carriage is in its home position
|
|
SLED Assembly
|
|
0
D7Z36A-SLED_Assy
|
D7Z36A-SLED_Assy
#SLED Assembly,#Parts,#D7Z36A-SLED_Assy
Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
|
|
Slider
|
|
0
D7Z36A-Slider
|
D7Z36A-Slider
#Slider,#Parts,#D7Z36A-Slider
Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
|
|
Speaker
|
|
0
D7Z36A-Speaker
|
D7Z36A-Speaker
#Speaker,#Parts,#D7Z36A-Speaker
Speaker assembly - includes speaker cable.
|
|
Spitton
|
|
0
D7Z36A-Spitton
|
D7Z36A-Spitton
#Spitton,#Parts,#D7Z36A-Spitton
Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
|
|
Spring Compression
|
|
0
D7Z36A-Spring_Cmprsn
|
D7Z36A-Spring_Cmprsn
#Spring Compression,#Parts,#D7Z36A-Spring_Cmprsn
Compression spring - on pulley wedge for carriage belt tension
|
|
Trailing Cable
|
|
0
D7Z36A-Trailing_Cbl
|
D7Z36A-Trailing_Cbl
#Trailing Cable,#Parts,#D7Z36A-Trailing_Cbl
Trailing cable for scanner - cable connects from scanner to pc board.
|
|
Tray
|
|
102745
A7F64-60057
|
A7F64-60057
#Tray,#Parts,#A7F64-60057
Assy-MainTray-Farad
|
|
Tray Assembly
|
|
111157
A8Z70A
|
A8Z70A
#Tray Assembly,#Parts,#A8Z70A
Hewlett Packard A8Z70A HP Officejet Pro 250 Paper Tray A8Z70A - 250 Sheet
|
|
0
D7Z36A-Tray_Assy
|
D7Z36A-Tray_Assy
#Tray Assembly,#Parts,#D7Z36A-Tray_Assy
Paper input tray assembly for loading paper (bottom).
|
|
Tray Assembly Cover
|
|
0
D7Z36A-Tray_Assy_CVR
|
D7Z36A-Tray_Assy_CVR
#Tray Assembly Cover,#Parts,#D7Z36A-Tray_Assy_CVR
Tray cover - the top cover for the paper pick up tray unit.
|
|
Tray Base
|
|
0
D7Z36A-Tray_Base
|
D7Z36A-Tray_Base
#Tray Base,#Parts,#D7Z36A-Tray_Base
Tray base- bottom base of the paper input tray.
|
|
Window
|
|
0
D7Z36A-Window
|
D7Z36A-Window
#Window,#Parts,#D7Z36A-Window
Top/front access door assembly - print cartridge access door window.
|