|
C2670-60105
Paper input tray extender (Stop) - Extends from the bottom of the paper tray to accommodate different media lengths
|
|
|
RB1-6783-000CN
Tray stop - Right side tray stopper - Attached to right rear side of Tray 2 and 3 - Blue plastic piece
|
RC1-3124-000CN
Hinge shaft stopper - Holds the right side door hinge pin in place
|
C5870-40038
Fine paper length adjuster (Green) - Holds paper firmly against the back of the paper input tray
|
C6464-60018
Output tray extender, length adjustment, and paper catch - Blue
|
C2688-67054
Left Z stop assembly - Secures the left end of the drive shaft in the vertical direction
|
53620011KT
Paper stop - 'L' shaped piece that attaches to output tray
|
|
C7833-40012
Upper fold chute stop - Used to set the position of the upper fold on the paper (or form) - Has `1-4` fold indicators - Inserts in the top of the print-to-mail accessory
|
RB2-2023-000CN
Paper stop (Blue plastic) - Paper length adjustment stop plate
|
|
RB2-6472-000CN
Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use)
|
C6410-60037
Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray
|
|
C2162-67802
Paper width adjustment stop - Adjusts for input paper width
|
C4562-60002
Paper length adjustment stop - Holds paper against leading edge of loading mechanism - Medium purple
|
|
|
|
RC1-3090-000CN
Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used
|
|
RB1-6382-000CN
Stop plate (Green) - For paper length - In universal cassette
|
|
RB2-3019-000CN
Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use)
|
|
RC2-1100-000CN
Short media stopper - Attached on the paper pickup/output tray - For the LaserJet P1005/P1007 printer series
|
C7833-40013
Lower fold chute stop - Used to set the position of the lower fold on the paper (or form) - Has `A-D` fold indicators - Inserts below the output bin slot on the print-to-mail accessory
|
RC1-7288-000CN
Link stopper - Stop for lever arm that couples the drive gear to the toner cartridge
|
|
|
|
|
07BA12582KC
Flip-up paper stop on top cover - For paper output
|
|