RM1-3741-030CN printer parts diagram.

12
 

RM1-3741-030CN is represented by #33 in the diagram below.

Internal components
RM1-3741-030CN is represented by #33 in the diagram below.
  • 1
    • 1 RK2-1490-000CN - Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly.
  • 3
    • 3 RM1-1485-000CN - Roller assembly - Black plastic housing that holds rollers in front of Tray 2 pickup roller assembly
  • 4
    • 4 RU5-2386-000CN - Torsion spring - Provides tension for Tray 1 paper sensor flag
  • 5
    • 5 RC2-0638-000CN - I/O face plate - Mounts on the formatter board cover (non-network models)
  • 6
    • 6 RC2-0593-000CN - Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction.
  • 7
    • 7 RK2-1497-000CN - Cooling fan - Located on the right side of the printer.
  • 13
    • 13 RC1-3939-000CN - Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor
  • 15
  • 16
    • 16 XA9-1503-000CN - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
  • 17
    • 17 RM1-4041-000CN - Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3)
  • 18
    • 18 WT2-5678-000CN - Cable clip - White plastic push-in clip with mounting pin
  • 19
    • 19 RC2-0627-000CN - Formatter cover - Mounts on the left back side of the printer
  • 20
    • 20 RC2-0628-000CN - Anti-magnetic plate - Located on the formatter cover
  • 21
    • 21 RC2-0592-000CN - Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer.
  • 22
    • 22 RC1-4083-000CN - Papre guide - Paper guide under registration roller assembly
  • 23
    • 23 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 24
    • 24 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 25
    • 25 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 26
    • 26 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 27
    • 27 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
  • 28
    • 28 XB2-7300-605CN - Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal
  • 31
    • 31 RM1-3730-000CN - Engine controller assembly - Engine controller PC board and metal pan - 110VAC/127VAC
    • 31 RM1-3730-060CN - Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
    • 31 RM1-3731-000CN - PC Board : Engine controller assembly - Engine controller PC board and metal pan - 220VAC/240VAC
    • 31 RM1-3731-060CN - Engine controller assy, Engine controller PC board assembly and metal pan - For 220 VAC to 240 VAC operation
  • 32
    • 32 RM1-3712-000CN - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly.
  • 33
    • 33 5851-3997 - Kit-220V Fuser maint LJP300x/LJ30xx MFP
    • 33 RM1-3717-000CN - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
    • 33 RM1-3740-030CN - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat
    • 33 RM1-3741-030CN - Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
    • 33 RM1-3761-000CN - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear
  • 34
    • 34 5851-4012 - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
    • 34 RM1-3762-000CN - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
1
RK2-1490-000CN Solenoid Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly.
2
RM1-3714-000CN Gear Gear - Pick up roller gear assembly
3
RM1-1485-000CN Roller Roller assembly - Black plastic housing that holds rollers in front of Tray 2 pickup roller assembly
4
RU5-2386-000CN Spring Torsion spring - Provides tension for Tray 1 paper sensor flag
5
RC2-0638-000CN Plate I/O face plate - Mounts on the formatter board cover (non-network models)
6
RC2-0593-000CN Rod Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction.
7
RK2-1497-000CN Fan Cooling fan - Located on the right side of the printer.
8
XA9-1671-000CN Screw Screw - M3 X 8mm long
8
XA9-1671-000CN Screw Screw - M3 X 8mm long
9
XA9-1671-000CN Screw Screw - M3 X 8mm long
11
XA9-1671-000CN Screw Screw - M3 X 8mm long
12
XA9-1671-000CN Screw Screw - M3 X 8mm long
13
RC1-3939-000CN Lever Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor
14
WT2-5694-000CN Clamp Snap-in cable clamp
15
RC2-0588-000CN Holder Cable holder - Mounts on the main drive assembly.
16
XA9-1503-000CN Screw M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
17
RM1-4041-000CN Sensor Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3)
18
WT2-5678-000CN Clip Cable clip - White plastic push-in clip with mounting pin
19
RC2-0627-000CN Cover Formatter cover - Mounts on the left back side of the printer
20
RC2-0628-000CN Plate Anti-magnetic plate - Located on the formatter cover
21
RC2-0592-000CN Holder Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer.
22
RC1-4083-000CN Guide Papre guide - Paper guide under registration roller assembly
23
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
24
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
25
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
26
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
27
XB4-7401-005CN Screw M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
28
XB2-7300-605CN Screw Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal
31
RM1-3730-000CN PC Board Engine controller assembly - Engine controller PC board and metal pan - 110VAC/127VAC
31
RM1-3730-060CN PC Board Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan
31
RM1-3731-000CN PC Board PC Board : Engine controller assembly - Engine controller PC board and metal pan - 220VAC/240VAC
31
RM1-3731-060CN PC Board Engine controller assy, Engine controller PC board assembly and metal pan - For 220 VAC to 240 VAC operation
32
RM1-3712-000CN Drive Assembly Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly.
33
5851-3997 Service Parts Kit-220V Fuser maint LJP300x/LJ30xx MFP
33
RM1-3717-000CN Fuser Assembly Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear
33
RM1-3740-030CN Fuser Assembly Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat
33
RM1-3741-030CN Fuser Assembly Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat
33
RM1-3761-000cn Fuser Assembly Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear
34
5851-4012 Pickup Assembly Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
34
RM1-3762-000CN Pickup Assembly Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3
12
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.