RM1-1522-020CN printer parts diagram.

RM1-1522-020CN is represented by #39 in the diagram below.

• 1
  • 1 RC1-4114-000CN - Cam - Located between large white 201 tooth gear and drive release lever

• 2
  • 2 RC1-4116-000CN - Drive release lever -

• 3
  • 3 RC1-4116-000CN - Drive release lever -

• 4
  • 4 RC2-0649-000CN - Fuser film drive side plate - Located on the fuser assembly.

• 5
  • 5 RM1-3748-000CN - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability.

• 6
  • 6 RC2-0657-000CN - Fuser thrust stopper - Located on the fuser drive assembly.

• 7
  • 7 RC2-0701-000CN - Inner bushing - Rides on the large white 201-tooth drive gear.

• 8
  • 8 RK2-1489-000CN - Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly

• 9
  • 9 RM1-3746-000CN - Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer

• 10
  • 10 RU5-0950-000CN - Gear - 201-tooth gear

• 11
  • 11 CB414-67923 - Replacement gear kit - Includes 17,17,19 and 20 tooth gears
  • 11 RU5-0956-000CN - Gear - 20/20 tooth - Goes on the fuser drive assembly

• 12
  • 12 RU5-0957-000CN - Replacement gear kit - Includes 17,17,19 and 20 tooth gears

• 13
  • 13 RU5-0958-000CN - Replacement gear kit - Includes 17,17,19 and 20 tooth gears

• 14
  • 14 RU5-0959-000CN - Replacement gear kit - Includes 17,17,19 and 20 tooth gears

• 15
  • 15 RU5-2401-000CN - Compression spring - Provides pressure for the large 201 tooth white gear on right side of printer

• 16
  • 16 RU5-0394-000CN - Gear - 12-tooth Gear - Goes on the drive release assembly

• 17
  • 17 RU5-2920-000CN - Compression spring - Goes on the pendulum assembly

• 18
  • 18 XD9-0232-000CN - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear

• 19
  • 19 XA9-1671-000CN - Screw - M3 X 8mm long

• 20
  • 20 XA9-1671-000CN - Screw - M3 X 8mm long

• 21
  • 21 XA9-1671-000CN - Screw - M3 X 8mm long

• 22
  • 22 XA9-1671-000CN - Screw - M3 X 8mm long

• 23
  • 23 XA9-1671-000CN - Screw - M3 X 8mm long

• 24
  • 24 XA9-1671-000CN - Screw - M3 X 8mm long

• 25
  • 25 XA9-1671-000CN - Screw - M3 X 8mm long

• 26
  • 26 RC1-4108-000CN - Cover for main motor M1 - Located on lower right side of printer

• 27
  • 27 RC2-0652-000CN - Plain Washer - Located on the pendulum assembly

• 28
  • 28 RK2-1488-000CN - Main motor (M1) - DC motor located on the inner left side of the printer

• 29
  • 29 RU5-0951-000CN - Gear - 16-tooth gear

• 30
  • 30 RU5-0955-000CN - Gear - 42-tooth - Goes with the pendulum assembly

• 31
  • 31 RU5-0960-000CN - Gear - 31-tooth gear

• 32
  • 32 RU5-0962-000CN - Gear - 65-tooth gear

• 33
  • 33 XD9-0232-000CN - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear

• 34
  • 34 XB4-7401-005CN - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates

• 37
  • 37 RC1-4115-000CN - Coupling lever - White plastic lever between large white gear cam and drive release assembly

• 38
  • 38 RC2-0590-000CN - Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area.

• 39
  • 39 RM1-1522-000CN - Drive release assembly -
  • 39 RM1-1522-020CN - Drive release assembly

• 40
  • 40 RC2-0648-000CN - Air guide - Located next to the cartridge duct.

• 41
  • 41 RC2-0579-000CN - Gear cover - Mounts on the left side of the printer chassis.