C4557-60025 printer parts diagram.

12345
 

C4557-60025 is represented by #29 in the diagram below.

C4557-60025 is represented by #29 in the diagram below.
  • 1
    • 1 C4557-40130 - Left wall brace - Provides support for left wall
  • 2
    • 2 C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 2
    • 2 C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 2
    • 2 C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 2
    • 2 C4557-20007 - Pinch spring - Provides tension on upper paper guide
  • 3
    • 3 C4557-40128 - Left backbone brace - Provides support for backbone
  • 4
    • 4 C6409-00008 - Upper paper guide support - Base for upper paper guide
  • 6
    • 6 C4557-60011 - Separator pad for HP DeskJet 700 Series
  • 8
    • 8 C4557-00009 - Separator spring - Provides pressure between separator assembly and the center drive roller
  • 9
    • 9 C4557-40020 - Lower guide - Platform for seperator peg, spring and pad
  • 10
    • 10 C4557-20003 - Rear roller spring - Flexible axle for rear roller
  • 10
    • 10 C4557-20003 - Rear roller spring - Flexible axle for rear roller
  • 13
    • 13 C4557-00033 - Link spring - Provides tension to shaft of pick cam gear
  • 15
    • 15 C6409-40040 - Pick cam - Controls pressure plate and lever
  • 18
    • 18 C4557-40016 - Kicker - Restacks paper in stack after top sheet is picked
  • 19
    • 19 C4557-00037 - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
  • 20
    • 20 C4557-40063 - Separator lifter - Used to lift the separator peg
  • 21
    • 21 C5870-40020 - Right backbone brace - Installed on right side of printer base to provide support for backbone
  • 23
    • 23 C4557-40118 - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
  • 24
    • 24 C6409-00013 - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel
  • 25
    • 25 C5870-00004 - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
  • 26
    • 26 C4557-20028 - EOR tension spring - Maintains tension on wear strip
  • 27
    • 27 C4557-40150 - Pivot snap - Used to hold pivot to pick feed roller shaft
  • 29
    • 29 C4557-40095 - Encoder gear for HP Color Copier 260
    • 29 C4557-60025 - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
    • 29 C6409-60037 - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
  • 30
    • 30 C4557-20024 - Shifter spring - Provides tension on the pivot
  • 31
    • 31 C5870-40030 - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
  • 32
    • 32 C4557-00035 - Paper pusher spring - Maintains alignment in paper tray
  • 32
    • 32 C4557-00035 - Paper pusher spring - Maintains alignment in paper tray
  • 33
    • 33 C5870-40022 - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
  • 33
    • 33 C5870-40022 - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
1
C4557-40130 Brace Left wall brace - Provides support for left wall
2
C4557-20007 Spring Pinch spring - Provides tension on upper paper guide
3
C4557-40128 Brace Left backbone brace - Provides support for backbone
4
C6409-00008 Support Upper paper guide support - Base for upper paper guide
6
C4557-60011 Separator Separator pad for HP DeskJet 700 Series
7
C5870-40029 Pin Separator peg for HP DeskJet 895C
8
C4557-00009 Spring Separator spring - Provides pressure between separator assembly and the center drive roller
9
C4557-40020 Guide Lower guide - Platform for seperator peg, spring and pad
10
C4557-20003 Spring Rear roller spring - Flexible axle for rear roller
12
C4557-40085 Link Link pin for HP Color Copier 160
13
C4557-00033 Spring Link spring - Provides tension to shaft of pick cam gear
14
C4557-40084 Link Pivot link for HP Color Copier 270
15
C6409-40040 Cam Pick cam - Controls pressure plate and lever
16
C4557-40021 Gear Feed roller idler gear
17
C5870-20002 Spring Paper stacker (kicker) spring
18
C4557-40016 Paper Stacker Kicker - Restacks paper in stack after top sheet is picked
19
C4557-00037 Lever Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
20
C4557-40063 Lifter Separator lifter - Used to lift the separator peg
21
C5870-40020 Brace Right backbone brace - Installed on right side of printer base to provide support for backbone
22
C5870-00002 Clip Service station ESD grounding clip
23
C4557-40118 Foot Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
24
C6409-00013 Backbone BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel
25
C5870-00004 Strip Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
26
C4557-20028 Spring EOR tension spring - Maintains tension on wear strip
27
C4557-40150 Snap Pivot snap - Used to hold pivot to pick feed roller shaft
28
C4557-80019 Encoder Paper motor encoder disk
29
C4557-40095 Gear Encoder gear for HP Color Copier 260
29
C4557-60025 Roller Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
29
C6409-60037 Roller Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
30
C4557-20024 Spring Shifter spring - Provides tension on the pivot
31
C5870-40030 Roller Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
32
C4557-00035 Spring Paper pusher spring - Maintains alignment in paper tray
33
C5870-40022 Lever Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
12345
  • Social Media
  • Product Reviews
  • Service Blog
  • Follow Us:
  • Facebook  Linked In  Twitter  YoutTube  Google+
iTonerPlust
Copyright© 2024 Toner2Print Inc. All rights reserved. All prices and specifications are subject to change without notice.
Toner2Print Inc. is not responsible for typographical errors. All typographical errors are subject to correction.