LaserJet  - HP LaserJet 9050N Printer

Stacker_Assembly  - Optional 3000 sheet stapler/stacker assembly - Stacks up to 3000 sheets of standard paper (20-lb bond) on the stapler bin, staples in multiple positions up to 50 sheets, and has job offset capabilities for easy handling

Stacker_Assembly  - Optional 3,000-sheet paper output stacker assembly - Stacks up to 3000 sheets of standard paper(20-lb bond) on the stacker bin, has job offset capabilities for easy handling, and job separation (first page offset) for shared environments

Input_Assembly  - HP 2000 Sheet High Capacity Input Tray

Tray  - 2,000-sheet paper cassette tray (Tray 4) - Part number is for the paper tray ONLY

Fax_Module  - Multi Functional Printer analog FAX accessory - Includes three language user manual, both parallel cables, phone cord, power module and power cord

Maintenance_Kit  - Maintenance Kit (220V) - Replacement Parts after 350k Pages Includes, Fuser Assembly, 7 Feed/Separation Rollers, 2 Pickup Rollers and Transfer Roller

Maintenance_Kit  - Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller

Maintenance_Kit  - Maintenance Kit - For 120 VAC - Replacement Parts after 350k Pages Includes, Fuser Assembly, 7 Feed/Separation Rollers, 2 Pickup Rollers and Transfer roller

Flash_Card  - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Power_Supply  - Low voltage power supply assembly - For 100V to 127VAC operation - Mounts on the upper rear of the printer

Flash_Card  - 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Flash_Card  - 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Memory  - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM

Fuser_Assembly  - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat

Power_Supply  - Low voltage power supply assembly - For 100-127VAC operation - Mounts on the upper rear of the printer

Tray  - Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly

Tray  - 2,000-sheet high capacity paper feeder assembly

Tray  - Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly

Maintenance_Kit  - Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller

Maintenance_Kit  - Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller

Fuser_Assembly  - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation

Power_Supply  - Power supply assy

Maintenance_Kit  - Maintenance Kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, seven Feed/Separation rollers, two Pickup rollers and Transfer roller assembly

Power_Supply  - Low voltage power supply assembly - For 220-240VAC operation - Mounts on the upper rear of the printer

Power_Supply  - Low voltage power supply assembly - For 220V to 240VAC operation - Mounts on the upper rear of the printer

Maintenance_Kit  - Maintenance Kit - For 120 VAC operation - Replacement parts after 350k pages - Includes fuser assembly, seven feed/separation rollers, two pick-up rollers and transfer roller

Maintenance_Kit  - LaserJet 9000 series Maintenance Kit (120V) - Replacement parts after 350k pages -Includes Fuser Assembly, seven Feed/Separation rollers, two Pickup rollers and one Transfer roller

Maintenance_Kit  - Maintenance Kit (120V) - Replacement Parts after 350k Pages Includes, Fuser Assembly, 7 Feed/Separation Rollers, 2 Pickup Rollers and Transfer roller

Maintenance_Kit  - Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220-240V operation

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220-240V operation

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation

Hard_Drive  - Hd, eio 40g rohs high performance hard disk - plugs in one of the extended input/output (eio) slots

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220V to 240V operation

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220-240V

Maintenance_Kit  - Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller

Duplexer  - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process

Duplexer  - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process

Duplexer  - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process

Duplexer  - Duplexer assembly kit - Required for two-sided printing - Includes the duplexer assembly and installation instructions (multi-lingual)

Flash_Card  - 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Memory  - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package

Hard_Drive  - Hd, eio 40g rohs high performance hard disk - plugs in one of the extended input/output (eio) slots

Hard_Drive  - Hd, eio 40g rohs high performance hard disk - plugs in one of the extended input/output (eio) slots

Laser_Scanner  - Laser/Scanner assembly - Mounts on the support structure in the print engine frame assembly

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation

Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation

Power_Supply  - Low voltage power supply - 110 VAC input

Pickup_Assembly  - Paper input unit - Entire assembly

Laser_Scanner  - Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly

PC_Board  - DC controller board assembly

Memory  - 128MB, 100-pin SDRAM DIMM memory module

Fuser_Assembly  - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat

Fuser_Assembly  - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat

Power_Supply  - Low voltage power supply - 110VAC input

Pickup_Assembly  - Paper pickup assembly

Tray  - Optional Tray 1 assembly - Complete Tray 1 assembly including rollers and mechanical drives

Tray  - Optional Tray 1 assembly - Complete Tray 1 assembly including rollers and mechanical drives

Module  - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

Tray  - Multi-purpose Tray - Optional Tray 1 drop down paper input tray assembly only - Includes drop down flip out tray and paper width guides

Print_Server  - JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot

PC_Board  - Formatter board - Main Logic PCA - Not for use in N and DN models

PC_Board  - Formatter board - Main Logic PCA - Base unit model only

Print_Server  - Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port

Tray  - HP LJ9000 series Multipurpose Tray - Tray 1 assembly

PC_Board  - Copy processor board assembly - Includes the PC board and support carrier frame - Plugs in one of the EIO slots on Multi Function Printer/copier MFP the printer.

PC_Board  - Formatter board - Main Logic PCA - N and DN models only

PC_Board  - Formatter board - Main Logic PCA - N and DN models only

PC_Board  - Formatter board - Main Logic PCA - N and DN models only

PC_Board  - Formatter board - Main Logic PCA - N and DN models only

Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector

Roller  - Registration roller assembly

Registration  - Registration roller assembly

PC_Board  - DC controller board assembly

Memory  - 64MB, 100-pin SDRAM DIMM memory module

Memory  - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package

Power_Supply  - High voltage power supply board

PC_Board  - High voltage power supply board

Memory  - 32MB, 100-pin SDRAM DIMM memory module

Paper_Path_Module  - Vertical registration assembly

Paper_Path_Module  - Vertical registration assembly

Cartridge  - HP Ultra-Precise print cartridge (Smart print cartridge) - Will print approximately 30,000 pages based on a 5% print density

Hard_Drive  - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots

Hard_Drive  - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots

PC_Board  - Controller PC board - Tray 4 deck controller board - Controller PC Board - for 2000 sheet feeder - Uses data from volume and size PC boards to control paper tray

PC_Board  - Controller PC board - Tray 4 deck controller board - Controller PC Board - for 2000 sheet feeder - Uses data from volume and size PC boards to control paper tray

Paper_Input_Unit  - Paper Input Unit (PIU) - For paper input tray 4.

PC_Board  - Controller PC board

Print_Server  - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN

Print_Server  - JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - power module

Print_Server  - JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module

Control_Panel  - Control panel - Control panel assembly - Control buttons and display Control Panel Assembly

Control_Panel  - Control panel assembly - Control buttons and display Control Panel Assembly

Print_Server  - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers

Memory  - 256MB, 100-pin, DDR DIMM

Power_Supply  - High voltage power supply board - Mounts on the upper rear of the printer

Control_Panel  - Control Panel Assembly

Control_Panel  - Control Panel Assembly

Memory  - 512MB 100-Pin DDR DIMM

Cover  - Right cover assembly - Includes all components attached to this door

Delivery  - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans

Delivery  - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans

Delivery  - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans

Door  - Left door and diverter assembly

Door  - Left door assembly

Cover  - Right cover assembly - Includes all components attached to this door

Drive_Assembly  - Drum feed drive assembly

Drive_Assembly  - Drum feed drive assembly

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Print_Server  - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

Power_Supply  - Power supply assembly

Cartridge  - 43x hi yield black toner

Power_Supply  - Power supply assembly

Tray  - 500-sheet paper input tray assembly

Memory  - 512MB DDR DIMM 100pin

Delivery  - Delivery cross member assembly - Includes the 'L' shaped support bracket with the rear delivery fan (Fan 3), front delivery fan (Fan 4), and face down tray fan (Fan 6)

Delivery  - Delivery cross member assembly - Includes the 'L' shaped support bracket with the rear delivery fan (Fan 3), front delivery fan (Fan 4), and face down tray fan (Fan 6)

Drive_Assembly  - Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller

Power_Supply  - High Voltage power supply board - Mounts on the upper rear of the printer

Print_Server  - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.

Memory  - 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM

Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector

Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector

Print_Server  - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.

Print_Server  - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector

Print_Server  - JetDirect 175X Fast Ethernet external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port

Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module

Print_Server  - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port

Motor  - Drum feed drive motor

Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module

Memory  - 128MB, 100-pin, DDR DIMM

Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module

Flash_Card  - 128MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Memory  - 16MB flash firmware DIMM

Memory  - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM

Memory  - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM

Memory  - 128MB, 100-pin SDRAM DIMM memory module

Tray  - 500-sheet paper cassette - Paper cassette used for tray 2 and tray 3

Drive_Assembly  - Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller

Flash_Card  - 256MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Drive_Assembly  - Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller

PC_Board  - Memory controller PC Board

Delivery  - Face-up delivery assembly

Delivery  - Face-up delivery assembly

Motor  - Drum feed drive motor

Memory  - 32MB, 100-pin SDRAM DIMM memory module

PC_Board  - Paper pickup board

Memory  - 32MB, 100-pin SDRAM DIMM memory module

PC_Board  - Memory controller PC Board - Toner cartridge

Print_Server  - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port

Cover  - Front cover assembly - Large door above trays 2 and 3

Motor  - Fuser delivery motor - 24VDC

Lifter  - Cartridge lifter assembly

Memory  - 64mb ddr dimm for HP LaserJet 9040 9050 Series

Memory  - 16MB, 100-pin SDRAM DIMM memory module

Memory  - 64MB 100-Pin DDR DIMM

Print_Server  - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector.

Memory  - 8MB simplified Chinese MROM DIMM - For LaserJet printers

Motor  - Fuser delivery motor (24 VDC) - Provides power for fuser delivery drive assembly

Memory  - 32MB, 100-pin SDRAM DIMM memory module

Memory  - 16MB, 100-pin SDRAM DIMM memory module

Motor  - Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly

Fan  - Controller board tubeaxial fan

Memory  - 32MB flash memory - Firmware version 8.102.2 - For LaserJet 9050

Motor  - Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly

Fan  - Controller board tubeaxial fan

Tray  - Multi-purpose Tray - Optional Tray 1 drop down paper input tray assembly only - Includes drop down flip out tray and paper width guides

Cover  - Front cover assembly - Large door above trays 2 and 3

Cover  - Top left cover - Face down paper output cover - Located on the left side portion of the top cover

Memory  - This is an HP 32MB 100 Pin DDR (Double Data Rate) printer memory module, part number Q3982AX, it is compatible with various HP LaserJet printers.

Cartridge  - Replacement staple cartridge - Contains 5000 staples

Memory  - This is an HP 32MB 100 Pin DDR (Double Data Rate) printer memory module, part number Q7713AX, it is compatible with various HP LaserJet printers.

Cartridge  - Replacement staple cartridge assembly - Holds 5000 staples

Drive_Assembly  - Feed drive assembly - Includes the drive motor (M303), support bracket, and the four drive gears - Mounts in the 2,000-sheet paper feeder assembly

PC_Board  - Cartridge memory controller board - Between ECU and the toner cartridge memory antenna

Transfer_Assembly  - Transfer roller assembly - Includes both transfer guides and transfer roller

Fan  - Tubeaxial fan for HP LaserJet M9040 MFP

Fan  - Tubeaxial fan for HP LaserJet 9000 Series

Fan  - Tubeaxial fan for HP LaserJet 9040 9050 Series

Transfer_Assembly  - Transfer roller assembly - Includes transfer guides and transfer roller

Flash_Card  - 64MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Flash_Card  - 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Paper_Path_Module  - Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine

Paper_Path_Module  - Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine

Cartridge  - Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit

Holder  - Fuser connector holder assembly

Lifter  - Cartridge lifter assembly

Flash_Card  - LJ9040/50 FMC-32MB Flash

Roller  - Transfer roller - Includes the long black spongy roller, roller shaft, and drive gear - Transfers static charge to the paper

Cover  - Rear cover assembly

PC_Board  - Cartridge memory controller board - Between ECU and the toner cartridge memory antenna

Flash_Card  - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Flash_Card  - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Guide  - Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly

Guide  - Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly

Memory  - 32MB compact flash memory card with version 08.110.0 firmware

Cable  - Main cable harness and holder assembly

Cover  - Front cover for the 2,000-sheet paper feeder assembly

Cable  - Main cable harness and holder assembly

PC_Board  - Paper size PC board

Firmware  - LaserJet 9040/9050 MFP firmware memory - Version 08.071.9

Cover  - Rear center cover for the 2,000-sheet paper feeder assembly

Overlay  - Control panel overlay - For 220V application

PC_Board  - Paper pickup board

Cover  - Top right cover - Located on the right side portion of the top cover

Cable  - Cable assembly for HP LaserJet 9000 Series

Caster  - Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)

Holder  - Fuser connector holder assembly

Cover  - Left cover for the 2,000-sheet paper feeder assembly

Receptacle  - A/C power input receptacle module and power switch

Fan  - Tubeaxial fan (fan 1) - Provides air to the power supply

Fan  - Tubeaxial fan for HP LaserJet 9000 Series

Receptacle  - A/C power input receptacle module and power switch

Flash_Card  - 16MB Compact flash memory card - Traditional Cyrillic font

Flash_Card  - 16MB Compact flash memory card - Traditional Greek font

Memory  - 128mb ddr dimm for HP LaserJet 9040 9050 Series

Flash_Card  - 16MB Compact flash memory card - Traditional Greek font

Cover  - Front inside cover - Cover behind front drop down cover

Cable  - Cable assembly - Fuser power cable

Flash_Card  - 16MB Compact flash memory card - Traditional Hebrew font

Wireless_PC_Board  - HP Fast Infrared Connect pod (FIR) - Allows wireless printing from any IRDA-compliant PC

Door  - Left side door - Left cover that diverter assembly attaches to

Flash_Card  - 16MB Compact Flash memory card - Traditional Cyrillic font

Cover  - Right cover for the 2,000-sheet paper feeder assembly

Sensor  - Paper size sensing assembly

Cable  - Upper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer

Flash_Card  - 16MB Compact flash memory card - Traditional Arabic font

Sensor  - Paper size sensing assembly

Tray  - Face up paper output tray

Cover  - Service cover assembly - Cover for pickup and separation rollers

Holder  - Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in

Latch  - Right cover latch handle assembly

Fan  - Tubeaxial fan for HP LaserJet 9000 Series

Fan  - Tubeaxial fan for HP LaserJet 9000 Series

Guide  - Transfer roller guide - Mounts to the top of the base structure of the transfer roller assembly

PC_Board  - Paper size PC board

Lever  - Cartridge release lever assembly

Knob  - Fuser jam removal knob

Cover  - Lower right front corner cover for tray 2 and 3

Caster  - Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)

Fan  - Tubeaxial fan (fan 4) - Mounts on the upper left crossmember on the delivery assembly

Cover  - Left upper cover - Small cover above left door

Cover  - Left upper cover - Small cover above left door

Caster  - Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)

Sensor  - Paper volume sensing assembly

Cover  - Right rear cover - small cover strip on rear side of right cover assembly

Rail  - Right rail assembly

Cable  - Fuser Assembly high voltage cable and connectors

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

Caster  - Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)

Knob  - Fuser jam removal knob

Latch  - Right cover latch handle assembly

Cover  - Rear center cover for the 2,000-sheet paper feeder assembly

Holder  - Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in

Rail  - Left upper rail assembly

Cover  - Top cover for the 2,000-sheet paper feeder assembly

Cover  - Lower left cover - Smaller plastic piece below left door and diverter assembly

Latch  - Latch mount assembly

Rail  - Right rail assembly

Sensor  - Paper volume sensing assembly

Switch  - Switch assembly - Custom/standard paper switch

Cable  - Jetlink connector socket and cable

Torque_Limiter  - Torque limiter for HP LaserJet 9040 9050 Series

Cover  - Right rear cover for the 2,000-sheet paper feeder assembly

Damper  - Left door damper assembly

Cover  - Left upper cover - Small piece above left door

Cover  - Left back cover - Narrow strip covering the left rear corner of the printer

Fan  - Tubeaxial fan (#5) - Provides air to the cartridge area

Contact  - Toner cartridge contact assembly

Connector  - Jetlink connector - Connector between Tray 4 and printer engine

Cable  - Cable assembly for HP LaserJet 9040 9050 Series

Lever  - Cartridge release lever assembly

Cover  - Left rear cover for the 2,000-sheet paper feeder assembly

Rail  - Left lower rail assembly

Strap  - Restraining strap

Sensor  - End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches

Roller  - Separation roller - For tray 1 assembly

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

Contact  - Toner cartridge contact assembly

Cover  - Tray 1 blanking cover

Sensor  - End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches

Rail  - Left upper rail assembly

Cable  - Jetlink connector socket and cable

PC_Board  - Delivery assembly PC board

Cable  - Fan control cable - Includes cable and holder - On back of printer routes cable around DC controller PC board

Cover  - Lower left front corner cover for tray 2 and 3 - Includes power button

Switch  - Switch assembly - Custom/standard paper switch

PC_Board  - Paper volume sensor board

Caster  - Caster for HP LaserJet M9040 MFP

Switch  - Black toner cartridge switch - Detects when black cartridge is in correct position

Overlay  - Control panel overlay - For 110V application

Damper  - Left door damper assembly

Cover  - Lower right cover - Small plastic piece below right door assembly

Link  - Connector link - Door ajar flag

Connector  - Jetlink connector - Connector between Tray 4 and printer engine

Rail  - Cartridge guide rail - Right side toner cartridge guide rail

Rail  - Left lower rail assembly

Cable  - Fuser Assembly high voltage cable and connectors

PC_Board  - Paper volume sensor board

Latch  - Latch mount assembly

Mount  - Front pressure mount for toner cartridge

Cable  - Fan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board

PC_Board  - LED board - Small PC board with two LEDs and a connector - For indicating the operating status

Roller  - Pick-up roller for optional tray 1

Cable  - Multi-purpose/tray 1 cable assembly

Lever  - Custom/standard media size selection switch lever - Mounts on the left side of the 500-sheet paper input tray

Mount  - Rear Fuser Assembly mount

Screw  - Screw - M4 X 8mm long

PC_Board  - LED board - Small PC board with two LEDs and a connector - For indicating the operating status

Clip  - Retaining E-ring

Cover  - Fan cover - Metal cover for fan #5 - Cartridge fan cover

Retainer  - Push nut retainer

Screw  - Screw with captured washer - To hole plastic to metal - M4X6

Screw  - Screw - M4 X 8mm long

Screw  - TP Screw - Pan/washer head machine screw - M3X6

PC_Board  - Delivery assembly PC board

Cable  - Cable assembly for HP LaserJet 9000 Series

Clip  - E-ring retainer clip

Screw  - TP Screw - Pan/washer head machine screw - M3X8

Fuse  - Fuse - 3.15A, 250V max

Screw  - Screw with captured washer - Used to fasten plastic to metal - M4 X 6mm screw

Mount  - Front Fuser Assembly mount

Lever  - Paper size switching lever - To adjust paper size in tray (standard or custom size)

Cable  - Cable assembly for HP LaserJet 9040 9050 Series

Switch  - Fuser delivery drive assembly microswitch

Print_Server  - JetDirect 170X external print server

Protector  - Sheet protectors - 0.1mm (4.0 mil) thick polypropylene sheet protectors for 'A' size (8.5-inches x 11-inches) documents - Has top and side openings for easy insertion and removal of documents - 50 sleeves per box

Memory  - 8MB Traditional Chinese MROM DIMM - For LaserJet printers

Stacker_Assembly  - HP Multifunction Finisher - Has stacking, offset, stapling, booklet making and page by page folding capabilities

Memory  - 16MB flash firmware DIMM

Handle  - Registration guide handle

Print_Server  - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port

Print_Server  - JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable

Print_Server  - HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack

Cable  - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

Stacker_Assembly  - HP Multifunction Finisher - Has stacking, offset, stapling, booklet making and page by page folding capabilities

Flash_Card  - 512MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns

Rod  - ON/OFF switch push rod

Latch  - Front cover latch - Roller latch that holds front cover

Rail  - Front Fusing Rail

Cable  - Fan connecting cable - For both Fan 1 and 2

Rail  - Rear Fusing Rail

Guide  - Cartridge guide - Plastic structure with cartridge guide slot molded into it - Mounts on the upper front side of the registration assembly

Mount  - Rear pressure mount for toner cartridge

Housing  - Jetlink connector housing and cable holder assembly

Cable  - Fan connecting cable - Mounts on the rear of the printer

Roller  - Feed separation pick-up roller - Rubber roller on a plastic collar with integrated gear and locking tab

Shutter  - Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer

Hinge  - Front cover hinge

Mount  - Door dampener hinge mount - Left side/fuser door dampener mount (two used)

Cover  - Fan cover - Metal cover for fan #5 - Cartridge fan cover

Foot  - Chassis foot - Support for right side of printer chassis - Two used

Cleaner  - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills

Guide  - Paper pickup guide - Plastic shaft with several fins on it - Mounts on the upper right side of the print engine frame assembly

Cable  - Cable assembly for HP LaserJet 9000 Series

Contact  - Fuser electrical contact leaf spring

Cover  - Tray 1/MP Tray cable cover

Cover  - Right front inside corner cover

Hinge  - Cover hinge - Half of hinge that attaches to front cover

Roller  - Paper pick-up and feed roller assembly - Rubber roller with drive gear

Foot  - Chassis foot - Support for left side of printer chassis - Two used

Mount  - Front Fuser Assembly mount

Hook  - Cover hook - Used to mount the optional tray 1 assembly to the right side of the printer - Mounts on the top corners of the assembly (two used)

Spring  - Tension spring for HP LaserJet M9040 MFP

Screw  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal

Knob  - Jam removal knob

Screw  - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal

Clip  - E-ring retainer clip

Clip  - E-ring clip for HP Color LaserJet 1500 Series

Screw  - M4 X 12mm Indented pan head screw

Spring  - Compression spring - Provides tension for ON/OFF switch

Guide  - Paper guide for HP LaserJet 9040 9050 Series

Fuse  - Low voltage power supply fuse - 110V

Screw  - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic

Flag  - Sensor flag - Long rod with forked flag toward one end and curved flag at the other

Cable  - Cable assembly - Grounding cable for tray 1

Cover  - Blanking cover - Located behind the cartridge release lever

Spring  - Laser shutter spring - Provides tension for laser shutter

Screw  - Machine screw with captured washer - M3 X 29.5mm long

Arm  - Shutter arm for HP LaserJet M9040 MFP

Spring  - Torsion spring - Provides tension for paper selector switch

Cable  - High voltage power supply ribbon cable

Screw  - Wafer head machine screw, clear zinc, 3M X 8mm - Secures plastic to metal

Screw  - M3 pan-head Phillips screw with flat washer - 8mm long

Screw  - Screw - M3 X 6mm long

Spring  - Tension spring for HP LaserJet M9040 MFP

Screw  - Screw - M4 x 6mm long

Clip  - Retaining E-ring

Screw  - Screw - M4 X 8mm long

Screw  - Machine screw with captured washer - M3 X 29.5mm long

Mount  - Rear Fuser Assembly mount

Flag  - Sensor flag - Short rod with two flat flags and a curved end flag

Spring  - Shutter arm spring - Provides tension for shutter arm

Cap  - Right cover cap

Clip  - Retaining clip

Screw  - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long

Latch  - Left side alignment latch for front door

Spring  - Torsion spring - Provides tension for bin full flag

Gear  - 21 tooth gear for HP LaserJet M9040 MFP

Screw  - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)

Screw  - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal

Flag  - Sensor flag - Short rod with two flags on it

Lever  - Microswitch lever - Activates interlock switches from both the front and left doors

Spring  - Compression spring - provides tension for right cover latch

Cable  - Jetlink connector grounding cable

Care_Pack  - HP 5 year 4-hour response 13x5 onsite for LaserJet 9040 and 9050 hardware support

Memory  - 64mb ddr dimm for HP LaserJet 9040 9050 Series

Care_Pack  - HP 4 year 4-hour response 13x5 onsite for LaserJet 9040 and 9050 hardware Support

Care_Pack  - HP 1 year Post Warranty Phone Assist Mid-range Multifunction and High-end LaserJet printer Service

Care_Pack  - HP 1 year Post Warranty 4 hour response 13x5 Onsite LaserJet 90xx Hardware Support

Paper  - Media for HP C8179A

Care_Pack  - HP 3 year Next business day Onsite LaserJet 9040/ 9050 Hardware Support

Care_Pack  - HP 1 year Post Warranty Next business day Onsite LaserJet 90xx Hardware Support

Paper  - Media for HP Q5986A

Paper  - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides

Flash_Card  - Compact flash card - Traditional Arabic font

Care_Pack  - HP 1 year Post Warranty 4 hour response 9x5 OnsiteLaserJet 90xx Hardware Support

Care_Pack  - HP 4 year 4-hour response 9x5 onsite for LaserJet 9040 and 9050 hardware Support

Paper  - Media for HP Q5956A

Print_Server  - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port

Memory  - 32MB flash memory - Firmware version 08.108.0 - For LaserJet 9040/9050

Memory  - 512mb ddr dimm for HP LaserJet 9040 9050 Series

Flash_Card  - Compact flash card - Traditional Arabic font

Care_Pack  - HP 4 year Next business day Onsite + Defective Media Retention LaserJet 9040/9050 Support

Care_Pack  - HP 2 year Post-Warranty Next business day onsite LaserJet 90xx Hardware Support

Care_Pack  - HP 3 year 4 hour response 9x5 Onsite LaserJet 9040/ 9050 Hardware Support

Care_Pack  - HP Network Install Mono high-end LaserJet Service

Paper  - Media for HP C8179A

Print_Server  - JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network

Care_Pack  - HP 1 year Post-Warranty Next business day Defective Media Retention laserJet 9050 Support

Paper  - Media for HP Q5964A

Paper  - Everyday Copy and Print Paper - A size (8.5 x 11-inches) - 500 Sheets per package

Paper  - Media for HP Q3950A

Memory  - 256mb ddr dimm for HP LaserJet 9040 9050 Series

Manual  - LJ 9000/9050 series combined service manual. go to home page SUPPORT CENTER.

Memory  - 256mb ddr dimm for HP LaserJet 9040 9050 Series

Screw  - M3 X 8 Screw for HP LaserJet 9040 9050 Series

Screw  - M3X6 pan-head Phillips screw with annular nails - 8mm long

Screw  - M3 X 6 screw for HP LaserJet 9040 9050 Series

Memory  - 32MB flash memory - Firmware version 8.102.2 - For LaserJet 9050

Care_Pack  - HP 5 year Next business day onsite for LaserJet 9040 and 9050 hardware Support

Care_Pack  - HP 5 year Next business day Onsite + Defective Media Retention LaserJet 9040/9050 Support

Paper  - Media for HP Q3950A

Flash_Card  - Compact flash - Traditional Cyrillic font

Care_Pack  - HP 4 year Next business day Onsite LaserJet 9040/ 9050 Hardware Support

Paper  - Media for HP C8546A

Paper  - Media for HP C8991B

Paper  - Media for HP Q1661A

Memory  - 32MB flash memory - Firmware version 8.102.2 - For LaserJet 9040/9050

Print_Server  - JetDirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM

Paper  - Premium LaserJet cover paper - Heavyweight (75lb), smooth finish on both sides, 96 brightness - A size (8.5 x 11-inches) - 100 sheets per box

Cable  - Upper cable guide assembly

Care_Pack  - HP 3 year 4 hour response 13x5 Onsite LaserJet 9040/ 9050 Hardware Support

Paper  - Media for HP Q3948A

Paper  - Media for HP CB493A

Paper  - Media for HP C8163A

Paper  - Media for HP C8179A

Print_Server  - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

Flash_Card  - Compact flash card - Traditional Hebrew font

Flash_Card  - Compact flash card - Traditional Hebrew font

Flash_Card  - Compact flash card - Traditional Greek font

Paper  - Media for HP C8546A

Paper  - Media for HP C8163A

Paper  - Media for HP Q5957A

Paper  - Media for HP Q7815A

Print_Server  - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

Memory  - 32MB flash memory - Firmware version 8.102.2 - For LaserJet 9050

Print_Server  - JetDirect 170x Office Connect Print Server

Service_Guide_PH  - HP LaserJet 9050n Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.

Memory  - 32MB compact flash memory card with version 08.106.1 firmware

Care_Pack  - HP 3 year Next business day Onsite with Defective media retention LaserJet 9040 9050 Support

Screw  - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal

Screw  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal

Paper  - Media for HP C8163A

Paper  - Media for HP Q7816A