Part |
Description |
|
Canvas - Studio canvas (368 gsm) - 91.4cm (36in) x 10.7m (35ft) roll - For regular ink or UV resistant ink |
|
DesignJet - HP DesignJet 500PS Printer |
|
Print_Server - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
Module - Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan |
|
Module - Electronics module - ELEC MODULE ASSY. SV - RC FOR HP DESIGNJet PLOTTERS. |
|
Module - Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan |
|
Module - Electronics module - Contains Main Logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan |
|
Maintenance_Kit - DesignJet 500/800 42 inch model preventive maintenance kit - Includes idler pulley, spring tensioner, carriage base, service station, cutter assembly, setup pen assembly, 42 inch belt, encoder strip, trailing cable and RIDs assembly (OEM Limited Supply) |
|
Print_Server - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
|
Maintenance_Kit - DesignJet 500/800 maintenance kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip, setup pens, trailing cable, service station, cutter, and carriage - For 24 inch model only (OEM Limited Supply) |
|
Maintenance_Kit - DesignJet 500/800 maintenance kit - Contains lubricant, gloves, cotton wipe, spring tensioner, foams, tubes, belt, encoder strip, setup pens, trailing cable, service station, cutter, and carriage - For 24 inch model only (OEM Limited Supply) |
|
PC_Board - formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) |
|
PC_Board - FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) |
|
PC_Board - formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2 and firmware) |
|
PC_Board - formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2) |
|
PC_Board - FORMATTER POWER HPGL2 SV - HP-GL/2 and RTL formatter PC board |
|
Carriage - Printhead Carriage Assembly - Includes Carriage, Bushings, |
|
Carriage - Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor |
|
Carriage - Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor |
|
Carriage - Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor |
|
Memory - 128MB SO-DIMM memory module |
|
Upgrade_Kit - Formatter upgrade kit - Adds HP-GL/2 DesignJet 500 800 series GL/2 Card C7772A - Plugs into an EIO card slot (for the DesignJet 500) |
|
PC_Board - Formatter upgrade kit - Adds HP-GL/2 DesignJet 500 800 series GL/2 Card C7776-60002 - Plugs into an EIO card slot (for the DesignJet 500) |
|
Carriage - Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor |
|
Ink_System - Ink tubes assembly - For the 42-inch DesignJet 500/800 printer series - Includes 4 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and 4 setup pens |
|
Platen - Back platen assembly - Curved cover/guide that is installed below the paper drive roller (42-inches) |
|
Motor - Carriage (Scan-Axis) Motor Assembly - Includes Pulley and power cable |
|
Ink_System - Ink tubes assembly - For the 24-inch DesignJet 500/800 printer series - Includes 4 ink tubes complete with hardware assemblies at both ends (carriage crane and ink supply station crane), and 4 setup pens |
|
Ink_System - Ink tubes assembly - For the 24-inch DesignJet 500/800 printer series - Includes 4 ink tubes complete with hardware assemblies at both ends (Carriage crane and ink supply station crane), and 4 setup pens |
|
Module - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
|
Print_Server - Ethernet 10Base-T (RJ-45) EIO network internal print server PC board |
|
Print_Server - JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot |
|
Bin - Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs - For 42-inch plotters |
|
Print_Server - Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
|
Print_Server - Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
|
Roller - Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 42-inch model |
|
Roller - Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For use with 42-inch plotters |
|
Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
Stand - 24-inch printer stand and media bin kit for 500 series (Flint Gray) |
|
Stand - 24-inch printer stand and media bin kit for 800 series (Graphite Gray) |
|
Print_Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
Bin - Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs |
|
Bin - Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs |
|
Print_Server - JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
|
Print_Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN |
|
Paper - High gloss photo paper - 106.7cm (42in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
|
Bin - Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs - For 24-inch plotters |
|
Paper - Media for HP Q1279A |
|
Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll |
|
Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
|
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
|
Roller - Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 24-inch model |
|
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
|
Print_Server - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
|
Bin - Media bin (Flint gray) - Plastic tray that mounts to the printer stand legs |
|
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll |
|
Paper - Polyester matte film - 91.4cm (36in) x 36.6m (120ft) roll |
|
Service_Station - Ink Supply Station (ISS) - Includes ink pump motor, pump sensor, and out-of-ink sensors - Installed in right side of printer |
|
Service_Station - Ink Supply Station (ISS) - Includes ink pump motor, pump sensor, and out-of-ink sensors - Installed in right side of printer |
|
Cross_Brace - Cross-brace - Brace that connects and supports the two stand legs - For 24-inch plotters |
|
Power_Supply - Power supply assembly - Includes power switch |
|
Power_Supply - Power supply assembly for designJet - Includes power switch. (pwr supply for copier module is Q1278-60072) |
|
Paper - High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll |
|
Motor - Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables |
|
Motor - Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables |
|
Cross_Brace - Cross-brace - Brace that connects and supports the two stand legs - For 42-inch plotters |
|
Roller - Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 24-inch model |
|
Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
Print_Server - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
Print_Server - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
Memory - 64MB SO-DIMM memory module |
|
Guide - Left cutter guide bracket and left encoder holder kit |
|
Paper - Media for HP Q1274A |
|
Memory - 128MB SO-DIMM memory module |
|
Memory - 128MB SO-DIMM memory module - Can be installed ONLY into the formatter board |
|
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll |
|
Film - Clear film (4 mil) - 91.4cm (36in) x 22.9m (75ft) roll |
|
Mount - Rollfeed mount kit - Includes left and right housing |
|
Mount - Rollfeed mount kit - Includes left and right housing |
|
Leg - Leg assembly - Side support for the printer - Does NOT include the foot assembly |
|
Sensor - Drive roller encoder sensor |
|
Sensor - Drive roller encoder sensor |
|
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
|
Cable - Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 2.0m (6.5ft) long |
|
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
Print_Server - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
|
Guide - Bracket kit - Includes the left cutter guide bracket and left encoder holder |
|
Motor - Carriage (scan-axis) motor assembly - Includes cable |
|
Print_Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector |
|
Motor - Carriage (scan-axis) motor assembly - Includes cable |
|
Brace - Foot brace assembly - for 42-inch plotters |
|
Paper - HP universal high-gloss photo paper - 107cm (42in) x 30.5m (100ft) roll |
|
Service_Station - Service station - Service St SV - RCService station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer |
|
Service_Station - Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer |
|
Printhead - Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system |
|
Spindle - 24-inch rollfeed spindle rod assembly for DesignJet 500/800 series - Includes spindle, hubs, and end caps |
|
Cartridge - Media for HP C6095V |
|
Cover - Left end cover and EIO cover (Gray) COVER WHITE (SVC) - Right cover Left end cover and EIO cover - White or Gray plastic cover on left side |
|
Film - Clear film (4 mil) - 61cm (24in) x 22.9m (75ft) roll |
|
Print_Server - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector |
|
Gear - Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller |
|
Bushing - Cutter bushing for HP DesignJet 510ps |
|
Print_Server - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
Print_Server - JetDirect 610N Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has one RJ-45 connector |
|
Print_Server - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector. |
|
Display - Control panel assembly - Includes ribbon cable and English overlay marked with Menu; Back; Enter; Cancel and Form Feed/Cut |
|
Gear - Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller |
|
Control_Panel - Control panel assembly - Includes ribbon cable and english overlay marked with 'Menu', 'Back', 'Enter', 'Cancel', and 'Form feed and cut' |
|
Foot - Foot assembly (includes casters) - Mounts to the bottom of the left and right printer stand legs (two used) |
|
Paper - Media for HP C6096A |
|
Cover - Right side cover (Gray) - For the DesignJet 500 printer series only |
|
Platen - Back platen assembly - Curved cover/guide that is installed below the paper drive roller (24-inches) |
|
Print_Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector |
|
Cable - Carriage assembly trailing cable kit - Includes trailing cables, does not include instructions or clips - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For 24-inch models. |
|
Cable - Carriage assembly trailing cable kit - Includes trailing cables, does not include instructions or clips - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For 24-inch models. |
|
Paper - Media for HP C4724A |
|
Vellum - Vellum - 91.4cm (36in) x 45.7m (150ft) roll |
|
Memory - 64MB SO-DIMM memory module |
|
Sensor - Pincharm sensor - Installed in right front of print chassis |
|
Sensor - Media sensor - Installed in the front of the rear platen |
|
Belt - Carriage belt - Drives the carriage assembly (24-inch) |
|
Sensor - Media sensor - Installed in the front of the rear platen |
|
Sensor - Pincharm sensor |
|
Print_Server - JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot |
|
Tensioner - Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket |
|
Cover - Top cover assembly (Gray) - For the 42-inch DesignJet 500 printer series |
|
Bracket - Service station bracket |
|
Paper - Hewlett Packard Supplies HP paper - high-gloss photo paper - Roll A1 (24 in x 100 ft) - 179 g/m2 |
|
Paper - Media for HP C4708A |
|
Cover - Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series |
|
Vellum - Media for HP CQ653A |
|
Lifter - Pincharm lift mechanism for HP DesignJet 500 DesignJet 800 series - Includes pinch arm lever, blue only ( but not the long bar) |
|
Lifter - Pincharm lift mechanism for HP DesignJet 500 DesignJet 800 series - Includes pinch arm lever, blue only ( but not the long bar) |
|
Spitton - Left spittoon assembly - Contains absorbers which hold excess ink from printheads |
|
Cover - End cover - Left side of plotter end cover - Black in color for use on Model 800 |
|
Cover - Left end cover and EIO cover - White plastic cover on left side |
|
Printhead - No. 11 black ink printhead |
|
Platen - Back platen assembly - Curved cover/guide that is installed below the paper drive roller (42-inches) |
|
Paper - Media for HP C6074B |
|
Cover - Top cover assembly (Black) - For the 42-inch DesignJet 800 printer series |
|
Cover - Right side cover (Black) - For the DesignJet 800 printer series only |
|
Paper - Media for HP C6075A |
|
Hardware - Hardware kit for printer stand - Includes screwdriver and screws |
|
Strip - Encoder strip (24-inch) |
|
Cartridge - HP 82 High Capacity Yellow Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
|
Paper - Media for HP C6082A |
|
Cartridge - HP 82 High Capacity Magenta Ink Cartridge - 69cc, prints approximately 1400 pages at 5% printing density (USA) |
|
Cartridge - No. 82 standard capacity Cyan ink cartridge (69ml ink) |
|
Printhead - HP11 Magenta ink printhead |
|
Fan - Vacuum fan assembly (OEM LIMITED SUPPLY). |
|
Fan - Vacuum fan assembly (OEM LIMITED SUPPLY). |
|
Power_Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
|
Printhead - No. 11 magenta ink printhead |
|
Printhead - No. 11 yellow ink printhead |
|
Printhead - No. 11 cyan ink printhead |
|
Printhead - No. 11 black ink printhead |
|
Paper - Media for HP C6074B |
|
Deflector - Media deflector kit - Kit includes three deflectors |
|
Brace - Foot brace assembly - For 24-inch plotters |
|
Cartridge - HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
|
Platen - Front platen kit - Includes platens for both the 24-inch and the 42-inch models |
|
Cartridge - HP 82 High Capacity Magenta Ink Cartridge - 69cc, prints approximately 1400 pages at 5% printing density (USA) |
|
Printhead - HP11 Cyan ink printhead |
|
Printhead - HP 11 - Yellow ink printhead |
|
Platen - Back platen assembly - Curved cover/guide that is installed below the paper drive roller (24-inches) |
|
Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
|
Paper - Media for HP C7790E |
|
Bracket - Service station bracket - Installed on right-side of service station |
|
Paper - Hewlett Packard Supplies HP paper - bond paper - Roll (42 in x 150 ft) - 80 g/m2 |
|
Spindle - 24-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps |
|
Cover - Top cover assembly (Black) - For the 24-inch DesignJet 800 printer series |
|
Cutter - Cutter assembly for Hewlett Packard Plotters / DesignJets. |
|
Cutter - Cutter assembly for Hewlett Packard Plotters / DesignJets. |
|
Wheel - DesignJet 500/800 wheel kit - Metal bar with two attached wheels - Used with the 24 inch stand only |
|
Guide - Tube guide - Black plastic guide that ink tube system sits in - For 42 inch model |
|
Paper - Media for HP C4709A |
|
Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
|
Cable - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 5.0m (16ft) long |
|
Pinch_Assembly - Pincharm assembly with wheels |
|
Cover - Cover kit for drive roller encoder sensor |
|
Wheel - DesignJet 500/800 foot kit - Contains four rubber feet for bottom of plotter |
|
Oil - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil |
|
Cable - Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long |
|
Paper - Media for HP C6074B |
|
Paper - Media for HP C7770B |
|
Cover - Cover kit for drive roller encoder sensor |
|
Guide - Cutter guide - Guide bar for the cutter assembly - For 24-inch plotters |
|
Trim - Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers |
|
PC_Board - Interconnect PC board - Installed in right-side of printer |
|
PC_Board - Interconnect PC board Interconnect PC board - Installed in right-side of printer |
|
Sensor - Media deflector holders - For the DesignJet 500/800 printer series |
|
Encoder - Encoder disk assembly - Helps provide position the information of the paper |
|
Front_Panel - Front panel overlay (English) |
|
Hardware - Hardware kit - Includes various screws and nuts for the stand and touch screen assembly |
|
Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
|
Overlay - Front panel overlay (Portuguese) |
|
Power_Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
|
Cover - Left end cover and EIO cover (Gray) |
|
Print_Server - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector |
|
Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
|
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
|
Cover - Left end cover and EIO cover (Black) |
|
Power_Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
|
Overlay - Front panel overlay (Korean) |
|
Power_Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
|
Display - Front panel overlay (Spanish) |
|
Overlay - Front panel overlay (Chinese) |
|
Overlay - Front panel overlay (Italian) |
|
Overlay - Front panel overlay (German) |
|
Overlay - Front panel overlay (French) |
|
Display - Front panel overlay (Japanese) |
|
Overlay - Front panel overlay (Taiwanese) |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Asia/Pacific) |
|
Paper - HP Universal Semi-gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) roll |
|
Care_Pack - HP 2 year Post Warranty Next business day Onsite DesignJet 500 Hardware Support |
|
Care_Pack - HP 5 year Next business day Onsite DesignJet 500 Hardware Support |
|
Print_Server - HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack |
|
Paper - Productivity photo semi-gloss paper - 91.4cm (36in) x 30.5m (100ft) roll |
|
Vinyl_Adhesive - Colorfast adhesive vinyl (328 gsm) - 91.4cm (36in) x 12.2m (40ft) roll - For regular ink or UV-resistant ink |
|
Film - High gloss white film (4 mil) - 61cm (24in) x 30.5m (100ft) roll |
|
Paper - Productivity glossy photo paper - 91.4cm (36in) x 30.5m (100ft) roll |
|
Paper - HP Opaque Scrim - 61cm (24in) x 15.2m (50ft) roll |
|
Paper - HP Premium Instant-dry Gloss Photo Paper - 91.4cm (36in) x 30.5m (100ft) - 36 in roll |
|
Paper - Media for HP C7769C |
|
Paper_Bright White - Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll |
|
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Latin America) |
|
Paper - Basic photo satin paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
|
Print_Server - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
|
Paper - Super Heavyweight Paper - 61cm (24in) x 22.9m (75ft) roll (USA and Asia/Pacific) |
|
Paper - Media for HP CQ653A |
|
Care_Pack - HP 3 year Next business day Onsite DesignJet 500 Hardware Support |
|
Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil) |
|
Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll |
|
Paper - Media for HP Q1279A |
|
Cartridge - HP 82 High Capacity Cyan Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Europe) |
|
Paper - HP Super Heavyweight Plus Matte Paper - 61cm (24in) x 30.5m (100ft) roll |
|
Paper - Basic coated paper - 61cm (24in) x 45.7m (150ft) roll (USA and Asia/Pacific) |
|
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
|
Print_Server - JetDirect 175XExternal Print Server - Includes setup poster, software, folding sleeve for storing the poster and CD, power adapter and 2-foot USB cable |
|
Paper - Coated paper - 59.4cm (23.4in) x 45.7m (150ft) roll |
|
Paper - Media for HP C6074B |
|
Film - Double matte eraseable film - 61cm (24in) x 38.1m (125ft) roll (USA) |
|
Paper - Basic coated paper - 91.4cm (36in) x 45.7m (150ft) roll (USA and Asia/Pacific) |
|
Screw - Plastite screw (threaded insert mold-in, Textron K40) - M4.0 x 0.7, 20mm long, Torx T15 |
|
Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll |
|
Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
|
Paper - Media for HP C4703A |
|
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll |
|
Guide - Tube guide - Black plastic guide that ink tube system sits in - For 42 inch model |
|
Paper - Media for HP C4703A |
|
Print_Server - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
Other_Parts - English/korean for HP 32054F |
|
Paper - HP opaque scrim - 91.4cm (36n ) x 15.2 (50ft) roll |
|
Care_Pack - HP Maintenance Kit Replacement DesignJet 5x0/800 24-inch Service |
|
Care_Pack - HP 1 year Post Warranty Next business day Onsite DesignJet 500 Hardware Support |
|
Print_Server - JetDirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
|
Service_Guide_PH - HP DesignJet 500PS - 24-inch/Postscript Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
|
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
|
Paper - Paper based semi-gloss media - 61cm (24in) x 30.5m (100ft) roll |
|
Cartridge - HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
|
Paper - Media for HP C3792A |
|
Paper - Media for HP C7779B |
|
Paper - Media for HP C6084A |
|
Paper - Basic photo satin paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
|
Care_Pack - HP 4 year Next business day Onsite DesignJet 500 Hardware Support |
|
Care_Pack - HP Network installation DesignJet T23-71XX/400-6200 service |
|
Care_Pack - HP 1 year Post Warranty Phone Assistance DesignJet Midrange Printers Service |
|
Print_Server - JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network |
|
Cartridge - HP 82 High Capacity Yellow Ink Cartridge - 69cc, prints approximately 1400 pages at 5% printing density (USA) |
|
Paper - Polypropylene Adhesive Back print media - 106.7cm (42in) x 21.3m (70ft) |
|
Paper - Media for HP C3195A |
|
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
|
Paper_Bright White - Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll |
|
Paper - Semi-gloss photo paper - 106.7cm (42in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |