PC_Board  - Fax PC board for HP OfficeJet R80 Series

ADF  - ADF assembly - Includes cover and ADF mechanism

PC_Board  - Main logic PC board

Belt  - Carriage drive belt - Moves printhead side to side

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long

Manual  - Service manual on CD-ROM for printer/scanner/copier 500 series, color copier 160/170/260/270 and OfficeJet R series

Tray  - Automatic document feeder (ADF) output tray

Module  - Scanner module assembly - Moves along scanner slider rod to scan documents

PC_Board  - Ink cartridge carriage PC board

Tray  - Input tray extension

Roller  - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder

Belt  - Scanner belt - Moves the scanner module back and forth under the scanner glass

PC_Board  - Interconnect PC board

Power_Module  - Power module kit with AC power cord

Motor  - Motor and gear assembly - Drives scanner module - Does not include motor cable

Glass  - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel

Carriage  - Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel

Control_Panel  - Control panel (Keypad) assembly - Does NOT include cable

Power_Module  - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord

Spitton  - Spittoon base - The bottom of the service station assembly

Strip  - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position

LIU_Module  - Line interface unit (LIU) - Plug-in fax/phone line module - Includes attached LIU to wall socket cable (for USA)

Cable  - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.

Cable  - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.

Cartridge  -  2-#23 yeild tri clr ink

Control_Panel  - Control panel (Keypad) assembly kit - Does NOT include cable

Roller  - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel

Cartridge  - HP 23 Tri-color InkJet cartridge - 30 ml - Prints approximately 640 color graphics pages (actual yield depends on specific use including images printed, printer, print settings and other factors)(North America)

Power_Cord  - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)

Ferrite_Assembly  - Ferrite core - Attaches to the control panel ribbon cable

Keypad  - Fax keypad switch assembly

Cable  - Telephone cable (Spain, Portugal, and Greece)

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector

Cartridge  - HP InkJet Crtg 45A Black Large NAM

Door  - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch

Roller  - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel

Strip  - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion

Guide  - Upper paper guide - Guides media through paper path

Roller  - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings

Disk  - Paper motor encoder disk

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)

Motor  - Service station motor assembly - Includes PC board and gear

Tray  - Paper input tray assembly kit (Complete - Purple) - Plugs into front paper output tray assembly - Entire assembly

Base  - Scanner base assembly - Includes base and both ribbon cables

Absorber  - Spittoon sponge - Absorbs excess ink from cartridges

Roller  - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA

Cover  - Top cover (Document cover) - Cover only - Does not include other items such as keypad, PC boards, or cables

Tray  - Paper input tray assembly (complete) - Entire assembly - Purple

Sensor  - Flag and cable assembly - Media sensor

Motor  - Carriage motor assembly (Includes pulley)

Bezel  - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel

Power_Cord  - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)

Power_Cord  - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (For 240V in the UK and Ireland)

Stickers  - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

Chassis  - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly

Cable  - Ribbon cable - Includes ferrite core

Tray  - Input tray extender kit - Attaches to the front tray slot on the ADF assembly

Motor  - Paper advance motor

Tray  - Output tray extender kit - Attaches to the rear tray slot on the ADF assembly

PC_Board  - Paper encoder PCA - Controls operation of paper motor

Bracket  - Paper motor mounting bracket

Spring  - Paper stacker (kicker) spring

Cover  - Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly

Tray  - Paper input tray base - Does not include the pressure plate assembly

Pin  - Separator peg for HP DeskJet 895C

Idler  - Scanner belt idler assembly - Maintains scanner belt tension

Bezel  - Fax bezel - Installed over the fax control panel - English

Lever  - Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper

Shield  - Main PC board shield (Upper)

Cable  - Scanner motor cable

Cable  - Ribbon cable - Has 10-pin (M) connectors - 71.8cm (28.3in) long

Pad  - Length adjust pad (Poron) - Mounted under the fine length adjuster

Gear  - Cluster gear (large gear)

Flag  - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide

Spring  - Belt tension spring - Provides tension for carriage belt

Guide  - Rear paper guide - Guides media through rear of printer

Latch  - Plastic latch (Y-shaped)

Separator  - Separator pad for HP DeskJet 700 Series

Rod  - Scanner slider rod - Scanner module moves along this rod

Panel  - Right side panel - Covers the right side of the print mechanism

Latch  - Latch (Wavy slot)

Cover  - Cover for speed dial overlay

Cable  - Cable assembly - 16-pin (F) connector to 34.9cm (13.8in) cable with 3-pin (F) connector, 56.6cmn (22.3in) cable with 3-pin (F) connector, 59.4cm (23.4in) cable with 7-pin (F) connector, and 61cm (24in) cable with 5-pin (F) connector

Cable  - Scanner module trailing cable - Has 20-pin (M) edge connectors - 42.9cm (16.9in) long

Cable  - Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long

Panel  - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel

Gear  - Feed roller cluster gear

Rod  - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel

Carriage  - Ink cartridge carriage

Door  - Rear paper jam cleanout door assembly

Ferrite_Assembly  - Ferrite core for HP OfficeJet K60

Blade  - ESD blade for HP DeskJet 870C Series

Washer  - Felt washer - Used to lubricate the carriage rod

Clip  - Service station ESD grounding clip

Spring  - Paper pusher spring - Maintains alignment in paper tray

Spring  - Rear roller spring - Flexible axle for rear roller

Panel  - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel

Ferrite_Assembly  - Ferrite core - Attaches to the scanner ribbon cable

Guide  - Length adjust guide - Media input length adjuster

Spring  - Paper length adjuster spring - Provides tension for paper input length adjuster

Paper_Stacker  - Kicker - Restacks paper in stack after top sheet is picked

Power_Cord  - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)

Spring  - Latch spring - Provides friction for the knob on the rear cleanout door assembly

Spring  - Envelope spring - Holds envelopes in position for picking

Gear  - Pick gear for HP Color Copier 170

Guide  - Encoder disk guide

Brace  - Left backbone brace - Provides support for backbone

Channel  - Width adjust channel

Plate  - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly

Support  - Glass assembly support - Retains the scanner glass inside the scanner bezel

Adjuster  - Length adjuster kit - Media input length adjuster - Attaches to top left of automatic document feeder paper input tray

Spring  - ESD spring - Installed between ESD blade and carriage PC board

Spring  - Pinch spring - Provides tension on upper paper guide

Foot  - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)

Wiper  - Wiper assembly - Metal base with plastic wipers

Slider  - Integrated slider for carriage assembly

Cable  - Ribbon cable - Has 26-pin (M) edge connectors - 15.5cm (6.1in) long

Tray  - Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly

Cam  - Pick cam - Controls pressure plate and lever

Spring  - Left wall spring (front) - Holds left wall assembly in position

Cam  - Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position

Vent  - Cap vent - For equalizing the print cartridge capping pressure

Snap  - Pivot snap - Used to hold pivot to pick feed roller shaft

Retainer  - Ferrite retainer - Holds head drive flex cable ferrite

Spring  - Left wall spring (rear) - Provides pressure against media

Lever  - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker

Retainer  - Felt retainer - Holds the lubricating felt to the side of the carriage

Lifter  - Separator lifter - Used to lift the separator peg

Link  - Pivot link for HP Color Copier 270

Pin  - Link pin for HP Color Copier 160

Gear  - Transfer gear (double gear)

Backbone  - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel

Pallet  - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts

Door  - Rear cleanout door assembly kit - Paper jam cleanout door

Cable  - Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain)

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)

Sled  - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)

Latch  - Cartridge latch (Black) - Holds black ink cartridge in place

Spring  - Wing torsion spring - Provides pressure on the wing during paper output

Plate  - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt

Tray  - Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever

Flag  - A4 flag - Media sensor - Mounts on the top left edge of the upper paper guide

Spring  - Idler spring - Provides tension for the scanner belt idler assembly

Spring  - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges

Spring  - Separator spring - Provides pressure between separator assembly and the center drive roller

Spring  - Encoder spring - Provides tension for encoder strip

Shield  - Paper motor ESD shield

Shaft  - Cartridge latch shaft near top of carriage

Door  - Output door - Separates output media from input media

Panel  - Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame

Link  - Kicker bar cam link (spring loaded)

Panel  - Rear panel - Covers the back of the printer and the ground plane assembly

Spring  - EOR tension spring - Maintains tension on wear strip

Wing  - Left wing - Holds printed paper after being ejected

Wing  - Right wing - Holds printed paper after being ejected

Latch  - Cartridge latch (Color) - Holds color ink cartridge in place

Guide  - Lower guide - Platform for seperator peg, spring and pad

Gear  - Encoder gear for HP Color Copier 260

Tray  - Paper input tray pressure plate

Cable  - Carriage assembly flex cable - 40.3cm (15.9in) long

Adjuster  - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel

Overlay  - Speed dial overlay - Inserted into fax bezel over programmed speed dial buttons

Spring  - Drawer spring - Holds input drawer in place

Spring  - Right wing spring - Applies pressure to right wing during paper output

Spring  - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges

Spring  - Link spring - Provides tension to shaft of pick cam gear

Clip  - Paperclip - Holds upper paper guide pinch rollers in place

Spring  - Shifter spring - Provides tension on the pivot

Roller  - Rear roller (Black) - Between paper and rear paper guide

Gear  - Feed roller idler gear

Snap  - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring

Clip  - Serial cable retaining clip

Panel  - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame

Brace  - Right backbone brace - Installed on right side of printer base to provide support for backbone

Lever  - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment

Frame  - Wing frame - Chassis for in/out tray components

Panel  - Left side panel - Covers the left side of the print mechanism

Shield  - Main PC board shield (Lower)

Cable  - Ribbon cable for HP OfficeJet R80 Series

Cable  - Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long

Guide  - Width adjust (Purple) - Holds media against right wall of input tray

Roller  - Pinch roller - Provides downward pressure on media as it passes by upper paper guide

Shaft  - Drive shaft with molded gears on each end

Bezel  - Main control panel bezel - Installed over the main control panel - English

Power_Cord  - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)

Brace  - Left wall brace - Provides support for left wall

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)

PC_Board  - Banner PCA and cable assembly

Cable  - Ribbon cable for HP OfficeJet R80 Series

Guide  - Left wall pusher - Pushes against left side of media to maintain correct edge alignment

Support  - Upper paper guide support - Base for upper paper guide

Stickers  - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)

Guide  - Length adjuster - Media input length adjuster

Stop  - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray

Power_Cord  - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)

Turnaround_Assembly  - Turnaround assembly - Provides carriage belt tension - Does not include spring

Cable  - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)

Paper  - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

Cartridge  - Tri-color ink print cartridge - Prints approximately 475 pages based on 13.5% total density (4.5% for each colors) on a 8-inch by 10-inch print area (Canada)

Cartridge  - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific)

Cartridge  - InkJet Crtg 45A Black Large AP

Cartridge  - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)

Cartridge  - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)

Cartridge  - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada)

Cartridge  - THP Ink Crtg 23A Color EUR

Paper  - Media for HP C8127A

Deflector  - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

Door_Cartridge  - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

Extender_Input  - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

Fan_Vaccum  - Vacuum fan assembly

Glass_Adf_Window  - Small glass piece used when scanning - copying - faxing with ADF feeder.

Guide_Paper  - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

Service_Station  - Service station assembly - for conditioning the printheads when the carriage is in its home position

Paper  - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

Adf_Pad  - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing, scanning, or copying.

Bezel  - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

Chassis  - Chassis assembly - the large plastic item that forms the base of the print mechanism

Control_Panel  - Control panel assembly - control buttons and display on top front of the unit.

Print_Mechanism  - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

Scanner_Assembly  - Scanner assembly includes the entire ADF unit and entire scanner unit.

Scanner_Motor  - Scanner driving motor

Paper  - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets

Paper  - Media for HP C6749A

Paper  - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 15 sheets

NamePlate  - Nameplate - OfficeJet R80xi logo

Adf_Arm  - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.

Belt_Adf  - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit

Carriage_Only  - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

Feed_Rollers_Adf  - ADF feed roller kit - includes all rollers that feed paper through the feeder.

Glass_Assembly  - Main top copier glass assembly.

Motor_Carriage  - Carriage motor - motor that drives the carriage assembly

Overlay  - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

PC_Board_DC  - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

Roller_Exit  - Paper exit rollers - out put assembly.

Separator  - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

Slider  - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

Cartridge  - HP Ink Crtg 23D Large Color AP

Cartridge  - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America)

Lubricant  - Silicon Grease in a Syringe

Belt_Carriage  - Carriage belt - moves the carriage assembly across the carriage rod

Bracket_Tension  - Belt tension bracket - holds the carriage belt idler pulley

Cable_Mechanism  - Cable assembly which connects the main logic board to the print mechanism

Door_Carriage  - Main front access door - covers the top of the printer and provide access to the carriage when open.

Door_Rear  - Rear cleanout door assembly - rear paper jam clean out door assembly.

Paper  - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

NamePlate  - Nameplate - OfficeJet R80 series logo

Adf_Unit_Assembly  - Complete replacement assemlby unit. copier top assembly, include ADF feeder, pad, roller, motors etc. but may not included input tray and out put tray.

Clutch_Feed  - Clutch unit resposible for unit picking up paper from the pick up unit.

Cover_Cartridge  - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

Gear_Main  - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

Pad_Tray  - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing

PC_Board_Interface  - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.

Power_Cord  - Power module power cord- wall outlet cable to power module only. does not include power module.

Scanner  - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - major portion of the ADF main assembly. this is not t

Sensor_Open  - Door sensor assembly - open door sensor

Sensor_Out  - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

Tray_Assembly_Cover  - Tray cover - the top cover for the paper pick up tray unit.

Adf_Roller_Kit  - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan, copy, or faxed.

Arm_Sensing  - Arm assembly senses paper in bottom tray

Holder  - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

Pulley_Adf  - ADF feeder motor pulley

Window  - Top/front access door assembly - print cartridge access door window.

Paper  - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

Cartridge  - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA)

Cartridge  - HP Ink Crtg 23A Color LAR

Cartridge  - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America)

Film  - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

Adf_Feed_Assembly  - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).

Carriage_Belt  - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

Paper  - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

Paper  - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets

Paper  - Media for HP C6429C

Paper  - Media for HP C8244A

Cartridge  - Tri-Color Ink Print Cartridge - Prints Approximately 475

Tray  - Output tray extension - Attaches to the rear tray slot on the automatic document feeder (ADF) assembly

Adf_Scanner  - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents.

Belt_Duplex  - Duplex timing belt - small belt that goes on the duplexer unit

Adf_PC_Board  - Control board on the ADF unit

Arm_Plate  - Lever arm - used to lift the pressure plate lifter

Carriage_Latch  - A-arm latch - retains latch over the printheads on the carriage

Encoder_Strip  - Encoder strip - carriage position sensor reference

Extender_Adf  - Paper extension for the automatic document feeder (ADF) input tray

Formatter  - Formatter board assembly

Rod_Scanner  - Scanner rod - shaft that the scanner assembly rides on

Cartridge  - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)

Paper  - Media for HP C6429C

Service_Guide_PH  - HP OfficeJet R80xi Printer Reference Guide - Contains information such as product information, operation overview, paper behavior, mainenance, ink safety, and removal / replacement of parts

Bracket_Right  - Right bracket - carriage rod adjustment bracket (right)

Cover_Back  - Back cover of printer, it is usually removed to clear paper jams.

Encoder_Disk  - Disk encoder - helps to provide position information of the paper

Paper  - Media for HP C6428A

Sensor_Spot  - Spot sensor assembly is attached to the carriage assembly.

Paper  - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

Arm_Door  - Carriage access door sensor arm

Carriage_PC_Board  - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

Cover_Main  - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

Display  - Status led display (LCD display assembly).

Idler  - Scanner belt idler assembly - maintains scannter belt tension.

Power_Module_Assy  - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

Power_Supply_Board  - High voltage power supply board

Spitton  - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

Paper  - Media for HP C8136A

Tray  - Legal tray extension - Attaches to the input tray extension on the automatic document feeder (ADF) assembly

Absorber  - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

Adf_Motor  - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.

Arm_Tension  - Tension arm - maintains tension on carriage belt

Battery  - Battery pack for hp printer

Carriage_Motor  - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

Front_Panel  - Front panel assembly - includes lcd and actuator buttons

Pulley  - Paper pick up tray motor pulley.

Sensor_Exit  - Exit media sensor sv

Trailing_Cable  - Trailing cable for scanner - cable connects from scanner to pc board.

Paper  - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

Paper  - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package

Cartridge  - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Europe)

Speaker  - Speaker assembly

Paper  - Media for HP C5894A

Cartridge  - HP Ink Crtg 23D Large Color Can

Belt_Paper  - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

Drive_Assy_Adf  - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs

Duplexer  - Auto duplexer assembly - provides double sided printing capability

Ink_Delivery_System  - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

Pinchwheel  - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs -

Scanner_Cable  - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.

Sled_Assembly  - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

Tray_Base  - Tray base- bottom base of the paper input tray.

Cartridge  - InkJet Crtg 45A Black Large Can

AllinOne  - OfficeJet R80xi Printer

Arm_Pick_Up  - Paper detection arm - for registration plate on picking up paper

Cam  - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

Clutch_Adf  - ADF paper clutch unit. clutch that controls movement on the ADF feeder

Gear_Cluster  - Cluster gear, large gear on service station

Gear_Double  - Transfer gear - has double gear attached on service station

Gear_Station  - Gears on shaft of spittoon station

Roller_Pickup  - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

Scanner_Belt  - Scanner belt attaches from the scanner to the scanner motor.

Sensor_Adf  - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

Paper  - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

Printhead  - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe)

LIU_Module  - Line interface unit (LIU) kit - Plug-in fax/phone line module - Includes attached LIU to wall socket cable (USA)

Paper  - Media for HP C5894A

Cartridge  - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA)

Cartridge  - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)

Cable_Usb  - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing.

Encoder  - Encoder spring - provides tension for encoder strip

Flag_Paper  - OOPS flag - out of paper sensor

Motor_Adf  - ADF motor unit - drives ADF rollers on the feeder assembly

Motor_Service_Station  - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

Power_Supply  - Power supply board (internal pwr supply unit in the office machine).

Scanner_Unit  - Scanner unit includes the entire scanner base, but not the ADF portion.

Speaker  - Speaker assembly - includes speaker cable.

Cartridge  - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific)

Cartridge  - HP Ink Crtg 23A Color AP

Actuator  - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

Belt_Scanner  - Scanner assembly belt. belt moves the scanner while copying or scanning documents.

Cable_Panel  - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display.

Carriage_Cable  - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

Carriage_Latch_Cover  - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

Drive_Assembly  - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

Flag_Adf  - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

Pad_Adf  - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.

PC_Board  - Ink cartridge carriage assembly pc board - includes carriage pc board only

Rod_Carriage  - Carriage rod - shaft that the carriage assembly rides on

Roller_Adf  - Feeder ADF roller for picking up paper from ADF unit.

Cartridge  - HP Ink Crtg 23D Large Color LAR

Cartridge  - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific)

Paper  - Media for HP Q5761A

AC_Adapter  - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

Adf_Input_Tray  - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.

Adf_Out_Put_Tray  - ADF out put tray is where paper come out of ADF (automatic document feeder).

Adf_Sensor_Board  - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly

Bracket_Left  - Left bracket - carriage rod adjustment bracket (left)

Cap_Lifter  - These lifter caps hold the pressure plate lifter and the kicker spring in place.

Carriage_Assembly  - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

Fan_PC_Board  - Fan to cool power supply unit

Feed_Rollers  - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

Gear_Assembly  - ADF gear assembly driven by ADF main motor

Ink_Supply_Station  - Ink supply service station (iss) assembly

Motor_Scanner  - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.

Paper  - Media for HP C8952A

Paper  - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

Arm_Delivery  - Paper sensing arm - for 'paper out' or delivering paper sensing arm

Cable_Carriage  - Cable assembly which connects the main logic board to the carriage motor

Cable_Interface  - Parallel cable - connects from your printer to computer via your parallel port.

Carriage_Base  - Carriage base or pre-loader assembly - mounted to bottom of carriage base

Extender_Output  - Paper exit tray extension

Power_Module  - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

Spring_Compression  - Compression spring - on pulley wedge, for carriage belt tension

Tray_Assembly  - Paper input tray assembly for loading paper (bottom).

Paper  - Media for HP C6465A

Paper  - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes