Print_Mechanism  - Replacement print mechanism assembly - Includes the print mechanism assembly (with motors) , service station assembly, and scanner base assemblies

Scanner  - Scanner carriage assembly - Includes lamp

PC_Board  - Main logic board

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

Wing  - Right wing - Holds printed document after being ejected - Part of the input/output paper tray assembly

Tray  - Input/output paper tray assembly

Power_Supply  - Power supply PC board

Control_Panel  - Control panel assembly - Mounts to the front panel - Does NOT include the bezel or ribbon cable - Available for trade sales in Europe - Available for authorized service centers only in USA

Motor  - Scanner motor assembly

Cable  - Carriage assembly flex cable - Overall length is 46.7cm (18.4in)

Service_Station  - Service station assembly with tool and instructions - Does NOT include motor

Belt  - Drive belt - For the scanner carriage assembly

Tape  - Scanner ESD tape - 1/2 inch wide by 72 yards long - Adhesive backed polyester film - Used to cover the scanner aperture after scanner bezel is removed - Keeps dust out of scanner

Cable  - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long

Cable  - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector

Service_Station  - Service station assembly - Does NOT include motor, tools, or instructions

Rod  - Actuator rod - Vertical rod with cam - Actuates power switch on power supply board

Tray  - Input/output paper tray assembly - Holds 150 sheets

Cartridge  - HP Ink Crtg 41A Color NAM

Motor  - Carriage motor assembly

Cartridge  - HP InkJet Crtg 45A Black Large NAM

Oil  - Special lubricating oil - For carriage slider rod surface - (5cc oil)

Cover  - Document cover assembly - Lift-up scanner bed cover - Includes the cover, foam pressure pad, and hinge assembly

Motor  - Paper drive motor - Drives media through printer

Turnaround_Assembly  - Turnaround assembly - Holds belt tension components in place

Belt  - Drive belt - For the print mechanism carriage assembly

Power_Cord  - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)

Roller  - Lower pinch roller

Fan  - Tubeaxial fan - 92mm x 92mm x 25.5mm thick, 12VDC, 2,750 RPM - Includes cable assembly

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

Motor  - Service station motor

Stickers  - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

Power_Cord  - Power cord (Dove Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in South Africa and India)

Glass  - Scanner glass pane - Glass plate that documents to be scanned lay on

Panel  - Front panel (N-shaped, plastic) - Covers the area from the bottom of the lower main chassis to the scanner base assembly

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Korean

Spacer  - Fan spacer - Retains the fan filter and fan in the gasket

Idler  - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle

Guide  - Pre-guide (For envelopes)

Cover  - Screw head cover - Snap on cover which covers the recessed screw heads in front of the scanner copyboard (2 used)

Clamp  - Flex cable clamp

Clip  - Ribbon cable retaining clip

Panel  - Trim panel - Mounts on the bottom right side of the scanner base assembly

Trim  - Trim strip (border) - At right side of the scanner glass pane

Door  - Pen cartridge door - Access door for changing the printer ink cartridges (Mounts on left end of the scanner)

Stiffener  - Encoder stiffener - Prevents oscillation of encoder strip

Trim  - Trim strip (border) - In front of the scanner glass pane

Filter  - Fan filter - Mounts between the fan and fan spacer (in the fan gasket)

Strip  - Encoder strip - Carriage position sensor reference

Power_Cord  - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)

Power_Cord  - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)

Gasket  - Fan mounting gasket - Holds the fan, fan filter, and spacer in place on the internal chassis

Panel  - Left side panel - Requires a 'dental pick' type tool to releas the top rear retaining tab

Panel  - Right side panel - Provides access to the service station assembly - Held in place with rear accessed screw

Gear  - Gear cluster (Dual gear)

Arm  - Clutch actuator arm - Used to engage the pivot gears

Actuator  - Push rod - Power switch actuator shaft (with button)

Cable  - Cable assembly - Has 9-pin (F) connectors - 6.1cm (2.4in) long

Trim  - Rear trim strip (border) - At the rear of the copyboard glass

Power_Cord  - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)

Knob  - Scanner lock knob - Green knob and shaft assembly - Locks the scanner carriage assembly in place for shipping

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - English

Cable  - Ribbon cable - 10-pin (F) edge connectors on each end - 60.2cm (23.7in) long

OfficeJet  - Replacement OfficeJet pro 1150C (not available in Europe) - Does NOT include the control panel bezel

Cable  - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

Roller  - Pivot and feed roller assembly - Includes pivot and shaft - Feeds the media under the carriage assembly and print cartridges

Clip  - Scanner rod retaining clip

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Danish)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (German)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Spanish)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Norwegian)

Power_Cord  - Power cord (Dove Gray) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 220VAC in Argentina)

Panel  - Rear panel - Mounts to the rear of the lower main chassis

Motor  - Carriage motor - Provides power for carriage belt

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Finnish)

Shield  - Fan finger guard (shield) - Mounts on the back side of the fan and fan gasket

Power_Cord  - Power cord (Dove Gray) - 18 AWG, 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 220VAC in Chile)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Portuguese)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Italian)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Swedish)

Rod  - Scanner rod - Shaft that the scanner carriage assembly rides on

Stickers  - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (Dutch)

Power_Cord  - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)

Bezel  - Control panel bezel (Overlay) - Snaps on top of the control panel assembly (French)

Power_Cord  - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)

Service_Guide_PH  - HP OfficeJet Pro 1150C Printer Reference Guide - Contains information such as product information, operation overview, paper behavior, mainenance, ink safety, and removal / replacement of parts

Arm_Delivery  - Paper sensing arm - for 'paper out' or delivering paper sensing arm

Arm_Sensing  - Arm assembly senses paper in bottom tray

Belt_Paper  - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.

Bracket_Right  - Right bracket - carriage rod adjustment bracket (right)

Carriage_Base  - Carriage base or pre-loader assembly - mounted to bottom of carriage base

Gear_Station  - Gears on shaft of spittoon station

Paper  - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)

Paper  - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package

Adf_Scanner  - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents.

Adf_Sensor_Board  - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly

Adf_Unit_Assembly  - Complete replacement assemlby unit. copier top assembly, include ADF feeder, pad, roller, motors etc. but may not included input tray and out put tray.

Arm_Plate  - Lever arm - used to lift the pressure plate lifter

Belt_Scanner  - Scanner assembly belt. belt moves the scanner while copying or scanning documents.

Carriage_PC_Board  - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.

Control_Panel  - Control panel assembly - control buttons and display on top front of the unit.

Encoder  - Encoder spring - provides tension for encoder strip

Encoder_Strip  - Encoder strip - carriage position sensor reference

Motor_Service_Station  - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly

Service_Station  - Service station assembly - for conditioning the printheads when the carriage is in its home position

Cartridge  - InkJet Crtg 45A Black Large Can

Paper  - Media for HP C8136A

Wing  - Left wing - Holds printed document after being ejected - Part of the input/output paper tray assembly

Absorber  - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.

Cable_Carriage  - Cable assembly which connects the main logic board to the carriage motor

Cable_Usb  - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing.

Cap_Lifter  - These lifter caps hold the pressure plate lifter and the kicker spring in place.

Carriage_Latch  - A-arm latch - retains latch over the printheads on the carriage

Display  - Status led display (LCD display assembly).

Feed_Rollers_Adf  - ADF feed roller kit - includes all rollers that feed paper through the feeder.

Motor_Carriage  - Carriage motor - motor that drives the carriage assembly

Motor_Scanner  - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.

Overlay  - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.

PC_Board_Interface  - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.

Sensor_Spot  - Spot sensor assembly is attached to the carriage assembly.

Spitton  - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process

Paper  - Media for HP C5894A

Paper  - Media for HP C8127A

Arm_Tension  - Tension arm - maintains tension on carriage belt

Door_Cartridge  - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.

Formatter  - Formatter board assembly

Power_Cord  - Power module power cord- wall outlet cable to power module only. does not include power module.

Sensor_Open  - Door sensor assembly - open door sensor

Adf_Feed_Assembly  - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).

Arm_Pick_Up  - Paper detection arm - for registration plate on picking up paper

Chassis  - Chassis assembly - the large plastic item that forms the base of the print mechanism

Door_Carriage  - Main front access door - covers the top of the printer and provide access to the carriage when open.

Glass_Adf_Window  - Small glass piece used when scanning - copying - faxing with ADF feeder.

Pad_Tray  - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing

Roller_Adf  - Feeder ADF roller for picking up paper from ADF unit.

Sensor_Out  - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray

Slider  - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.

Trailing_Cable  - Trailing cable for scanner - cable connects from scanner to pc board.

Tray_Assembly_Cover  - Tray cover - the top cover for the paper pick up tray unit.

Paper  - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes

Manual  - OfficeJet Pro 1150C User's Guide (English)

AC_Adapter  - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.

Belt_Carriage  - Carriage belt - moves the carriage assembly across the carriage rod

Belt_Duplex  - Duplex timing belt - small belt that goes on the duplexer unit

Cable_Panel  - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display.

Carriage_Assembly  - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.

Gear_Double  - Transfer gear - has double gear attached on service station

Pad_Adf  - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.

PC_Board_DC  - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.

Rod_Scanner  - Scanner rod - shaft that the scanner assembly rides on

Cartridge  - HP Ink Crtg 41A Color EUR

Cartridge  - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific)

Cartridge  - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)

Adf_Out_Put_Tray  - ADF out put tray is where paper come out of ADF (automatic document feeder).

Adf_Pad  - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing, scanning, or copying.

Adf_PC_Board  - Control board on the ADF unit

Carriage_Motor  - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.

Drive_Assembly  - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.

Drive_Assy_Adf  - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs

Flag_Adf  - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

Pinchwheel  - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs -

Power_Supply  - Power supply board (internal pwr supply unit in the office machine).

Roller_Exit  - Paper exit rollers - out put assembly.

Scanner_Motor  - Scanner driving motor

Sled_Assembly  - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly

Spring_Compression  - Compression spring - on pulley wedge, for carriage belt tension

Paper  - Media for HP C8244A

Paper  - Media for HP Q5761A

Paper  - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes

Cartridge  - HP Ink Crtg 41A Color Can

Film  - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets

Printhead  - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe)

Duplexer  - Auto duplexer assembly - provides double sided printing capability

Extender_Adf  - Paper extension for the automatic document feeder (ADF) input tray

Extender_Input  - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths

Fan_PC_Board  - Fan to cool power supply unit

Flag_Paper  - OOPS flag - out of paper sensor

Gear_Main  - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.

Power_Module  - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord

Power_Module_Assy  - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord

Pulley_Adf  - ADF feeder motor pulley

Rod_Carriage  - Carriage rod - shaft that the carriage assembly rides on

Scanner  - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - major portion of the ADF main assembly. this is not t

Paper  - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets

Paper  - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets

Cartridge  - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada)

Arm_Door  - Carriage access door sensor arm

Cable_Interface  - Parallel cable - connects from your printer to computer via your parallel port.

Cover_Back  - Back cover of printer, it is usually removed to clear paper jams.

Encoder_Disk  - Disk encoder - helps to provide position information of the paper

Roller_Pickup  - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray

Clutch_Adf  - ADF paper clutch unit. clutch that controls movement on the ADF feeder

Cover_Cartridge  - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.

Deflector  - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly

Door_Rear  - Rear cleanout door assembly - rear paper jam clean out door assembly.

Extender_Output  - Paper exit tray extension

Gear_Assembly  - ADF gear assembly driven by ADF main motor

Ink_Supply_Station  - Ink supply service station (iss) assembly

Paper  - Media for HP C6429C

Actuator  - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).

Cam  - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position

Clutch_Feed  - Clutch unit resposible for unit picking up paper from the pick up unit.

Fan_Vaccum  - Vacuum fan assembly

Glass_Assembly  - Main top copier glass assembly.

Guide_Paper  - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken

Motor_Adf  - ADF motor unit - drives ADF rollers on the feeder assembly

Scanner_Assembly  - Scanner assembly includes the entire ADF unit and entire scanner unit.

Scanner_Cable  - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.

Separator  - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.

Tray_Assembly  - Paper input tray assembly for loading paper (bottom).

Paper  - Media for HP C6465A

Paper  - Media for HP C8952A

Adf_Arm  - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.

Belt_Adf  - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit

Bracket_Left  - Left bracket - carriage rod adjustment bracket (left)

Carriage_Cable  - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).

Gear_Cluster  - Cluster gear, large gear on service station

Holder  - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.

Ink_Delivery_System  - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly

Window  - Top/front access door assembly - print cartridge access door window.

Paper  - Media for HP C6429C

Paper  - Media for HP C6428A

AllinOne  - OfficeJet Pro 1150C Printer

Adf_Motor  - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.

Adf_Roller_Kit  - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan, copy, or faxed.

Carriage_Belt  - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.

Carriage_Only  - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).

Cover_Main  - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.

Feed_Rollers  - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk

Front_Panel  - Front panel assembly - includes lcd and actuator buttons

Idler  - Scanner belt idler assembly - maintains scannter belt tension.

Scanner_Unit  - Scanner unit includes the entire scanner base, but not the ADF portion.

Sensor_Exit  - Exit media sensor sv

Speaker  - Speaker assembly - includes speaker cable.

Tray_Base  - Tray base- bottom base of the paper input tray.

Paper  - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 15 sheets

Paper  - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package

Cartridge  - HP Ink Crtg 41A Color AP

Battery  - Battery pack for hp printer

Bezel  - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel

Bracket_Tension  - Belt tension bracket - holds the carriage belt idler pulley

PC_Board  - Ink cartridge carriage assembly pc board - includes carriage pc board only

Print_Mechanism  - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.

Cartridge  - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)

Cartridge  - InkJet Crtg 45A Black Large AP

Cartridge  - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)

Adf_Input_Tray  - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.

Cable_Mechanism  - Cable assembly which connects the main logic board to the print mechanism

Carriage_Latch_Cover  - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.

Power_Supply_Board  - High voltage power supply board

Sensor_Adf  - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly

Paper  - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package

Manual  - Service manual, technical support solutions guide and user's guide CD-ROM for print/scan/copy 370/380, OfficeJet 500/520/570/580/590/600/610/630/635/700/710/720/725, fax 910/920, OfficeJet Pro 1150/1170/1175, color copier 140/150

Pulley  - Paper pick up tray motor pulley.

Scanner_Belt  - Scanner belt attaches from the scanner to the scanner motor.

Paper  - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art

Paper  - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets

Film  - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package

Paper  - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets

Cartridge  - HP Ink Crtg 41A Color LAR

Cartridge  - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA)