Duplexer  - Duplexer assembly - For 2 sided printing capablity

Tray  - Optional 2000 sheet paper tray (Tray 4)

Print_Server  - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors

Print_Server  - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

Print_Server  - JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors

PostScript  - Postscript (level two) SIMM module

Drive_Assembly  - 420MB disk drive

Pickup_Assembly  - Paper pickup assembly - Includes pickup, feed and separation rollers

Drive_Assembly  - 420MB disk drive

Tray  - 2000 sheet paper tray - Slide out tray - Includes cables to raise tray

Print_Server  - EtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector

PC_Board  - Formatter board - Main Logic PCA

Print_Server  - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors

Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains ten new fusing assemblies)

Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains five new fusing assemblies)

Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds toner to paper with heat

Fuser_Assembly  - Fuser Assembly (For 220V to 240V operation) - Bonds toner to paper with heat

Laser_Scanner  - Laser/scanner assembly

Laser_Scanner  - Laser/scanner assembly

Stand  - LaserJet Printer Cabinet - For LaserJet 5Si family and 8000/8100 series printers - Supports the printer, and provides storage for supplies and accessories

Power_Supply  - Low voltage power supply - 240VAC, 50Hz - Includes power switch, AC receptacle and DC power supply

Feeder  - Replacement optional envelope feeder - Holds 100 envelopes

Maintenance_Kit  - Maintenance kit (220V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed

Maintenance_Kit  - Maintenance kit (220V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed

Transfer_Assembly  - Transfer assembly - Mounted on right side of 2000 sheet tray

Power_Supply  - Low voltage power supply - Includes power switch, AC receptacle, and DC power supply

Maintenance_Kit  - LaserJet 5Si and 8000 series Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed

Maintenance_Kit  -  LaserJet 5Si and 8000 series Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller

Maintenance_Kit  - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed

Module  - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

Maintenance_Kit  - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed

Pickup_Assembly  - PAPER PICKUP ASSY - Paper pickup assembly - Includes pickup, feed and separation rollers

Pickup_Assembly  - Paper pickup assembly - Includes pickup, feed and separation rollers

Print_Server  - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

Feeder  - Replacement optional envelope feeder - Holds 100 envelopes

Power_Supply  - High voltage power supply assembly

Memory  - 8MB, 70nS, 36-bit parity SIMM memory module

Power_Supply  - Low voltage power supply - 240VAC, 50Hz - Includes power switch, AC receptacle and DC power supply

Fuser_Assembly  - Fuser Assembly (For 100V to 120V operation) - Bonds toner to paper with heat

Fuser_Assembly  - Fuser Assembly (For 100V to 120V operation) - Bonds toner to paper with heat

Maintenance_Kit  - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, 6 feed/separation rollers, and transfer roller

Print_Server  - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector

PostScript  - PostScript (level two) SIMM module

PostScript  - PostScript (level two) SIMM module

Maintenance_Kit  - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, 6 feed/separation rollers, and transfer roller

Power_Supply  - Power supply for 2000 sheet paper tray

Module  - External token ring interface module - Has DB-9 connector

Print_Server  - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

Cartridge  - Black (Micro-Fine) toner cartridge - Page yield index 15,000

PC_Board  - DC controller board

Module  - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

Memory  - 8MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si

Duplexer  - Duplexer assembly - For two sided printing capability for hewlett packard laserJet printers.

Manual  - Self Paced Training Kit for LaserJet 5Si Series,8000,8100 and 8150

Cartridge  - Black (Micro-Fine) toner cartridge - Page yield index 15,000

Pickup_Assembly  - 2000 sheet paper tray paper pickup assembly

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Pickup_Assembly  - Paper pickup assembly

Pickup_Assembly  - Paper pickup assembly

PC_Board  - Paper handling controller board - Includes short ribbon cable to connect to formatter board

Print_Server  - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

Power_Supply  - Low voltage power supply - Includes power switch, AC receptacle, and DC power supply

Memory  - 4MB, 70nS, 36-bit parity SIMM memory module

Diverter  - Diverter assembly - Diverts paper to duplexer assembly or face up tray or face down delivery assembly

Module  - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

Print_Server  - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

Cover  - Top cover assembly - Does NOT include face up tray or control panel display

Print_Server  - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

Motor  - Main motor for HP LaserJet 5Si Mopier

Print_Server  - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

Power_Supply  - High Voltage Power Supply Assembly

PC_Board  - DC controller board

Control_Panel  - Control panel - Includes display

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long

Print_Server  - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector

Tray  - Upper paper input tray (Tray 2) - 500 sheet capacity - For letter, legal, and A4 size paper

PC_Board  - 2000 sheet paper tray controller board

Delivery  - Face down delivery assembly - Feeds paper to top of printer

Delivery  - Face down delivery assembly - Feeds paper to top of printer

Memory  - 4MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si

Manual  - Self paced training kit for LaserJet 5Si Series and 8000 Series - Includes NTSC format video (VHS), and student guide - Test available from Hewlett-Packard Insight

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long

Power_Cord  - 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output

Print_Server  - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors

Print_Server  - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

Print_Server  - EtherTwist 10Base-T LAN interface board

Print_Server  - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector

PC_Board  - Thermal PCA - Fuser setting controller PCA

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

Gear  - Main print drive gear assembly

Drive_Assembly  - 2000 sheet paper tray drive assembly

Tray  - Lower paper input tray (Tray 3) - 500 sheet capacity

Print_Server  - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors

Module  - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

Print_Server  - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector

Registration  - Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle.

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Memory  - 2MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors

Memory  - 16MB SIMM memory module

Cover  - 2000 sheet paper tray front cover - Front of the slide out tray

Feeder  - Feeder assembly - Transfer roller and registration assembly are mounted on this assembly

Roller  - Transfer Roller Assembly - Includes transfer guide bushings, transfer guide and transfer roller

Guide  - Roller : Transfer roller assembly - Includes transfer roller and guide unit with attached gear.

Fan  - Tubeaxial fan for LaserJets

Motor  - Paper input motor

Cover  - 2000 sheet paper tray left side cover

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

Memory  - 2MB, 32-bit SIMM memory module

Cover  - 2000 sheet paper tray right side cover

Guide  - Transfer guide - Guide transfer roller is mounted into

Door  - Right door assembly - Door below paper tray 1 - Support strap attached to right side

Module  - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

Power_Module  - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)

Roller  - Lower roller in Fuser Assembly - Black pressure roller

Roller  - Transfer roller - Transfer charge roller (Black)

Power_Supply  - Power module (wall mount, MEI-AH ED12007) - Input voltage 230VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Europe and Israel)

Drive_Assembly  - Diverter drive assembly - Four gear drive assembly - 20-tooth gear NOT included

Cover  - 2000 sheet paper tray rear cover

Cable  - Cable assembly for HP LaserJet 5Si Series

Cover  - Front cover- Front access door mounts to this cover

PC_Board  - 2000 sheet tray paper size board

PC_Board  - 2000 sheet tray paper sensor board

PC_Board  - Switch/sensor board - Includes face down tray sensors, fusing delivery sensor and door switch

Power_Cord  - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)

Guide  - Transfer guide - Guide transfer roller is mounted into. (complete trasfer roller assy. RG9-1361-020CN).

Power_Supply  - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)

Power_Module  - Pwer supply, 13v/300ma jpn

Tray  - Multi-Purpose paper input tray (Tray 1) - Includes pull out extender tray

Module  - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

Roller  - Transfer charge roller (Black)

Cover  - Front cover- Front access door mounts to this cover

Clutch  - Registration assembly clutch

Clutch  - Registration assembly clutch

Door  - Diverter door assembly - Upper door on left side of printer - Two struts are mounted to door

Clutch  - Registration assembly clutch

Cover  - Rear cover - Sheet metal

Sensor  - Photo sensor for HP Color LaserJet 8550 Series

Clutch  - Paper feed clutch

PC_Board  - Paper pickup board - Includes 8 photosensors

Power_Cord  - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)

Fan  - Fan for LaserJets

Tray  - Face-up output tray - At upper left side

Solenoid  - Face Up solenoid assembly

Fan  - Fan for LaserJets

Power_Supply  - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

Power_Module  - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)

Cover  - AC access cover - Has cut out for A/C power cord connection

Cover  - Right rear cover - attached to shert metal rear cover

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

Torque_Limiter  - Torque limiter for HP LaserJet 5Si Series

Pad  - Multipurpose paper input tray separation pad

Power_Module  - Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for use in Europe and Israel)

Power_Supply  - Power module (wall mount) - Input voltage 120VAC, 60Hz - Output voltage 12VDC, 1.25A, 15 watts (USA and Canada)

Power_Module  - Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA and Canada)

Power_Module  - Wall mount power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A - United States and Canada

Power_Module  - Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA and Canada)

Power_Supply  - Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts

Module  - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

Power_Cord  - Power cord (Gray) - 14 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada)

Power_Module  - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan)

Cover  - Lower Left Cover - Mounted below diverter door assembly

Cable  - Dual cable assembly with ferrites - 10-pin (F) connector, 9-pin (F) connector, and two 6-pin (F) connectors - 1.1m (3.7ft) long

Tray  - Face-down output tray - At top of printer

PC_Board  - Paper size sensor board - Used to sense paper size in upper and lower paper trays

Power_Module  - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord

PC_Board  - Paper size sensor board - Used to sense paper size in upper and lower paper trays

Power_Cord  - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)

Cable  - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

PC_Board  - Multipurpose paper tray board - Includes paper sensors PS1301 and PS1302

Support  - Access door struts - Attached to each side of diverter door assembly

Sensor  - Photo sensor kit - Includes photo sensors PS 1,3,5 and 6

Roller  - Duplexer roller assembly - Mounts in the center of the duplexer unit

Power_Module  - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)

Power_Module  - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)

Power_Cord  - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)

Door  - Front access door

Overlay  - Control panel overlay (English)

Power_Module  - Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia)

Cable  - Disk drive ribbon cable

Guide  - Paper size guide/stop - For upper or lower paper input tray

Arm  - Paper input unit sensor arm - Senses when paper passes through paper input unit

Clip  - Retainer clip - Keeps multipurpose/tray 1 hinge in place - Black plastic clip for left side tray 1 hinge stop

Power_Module  - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong)

Power_Cord  - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)

Cable  - Cable assembly for HP LaserJet 5Si Series

Cable  - Cable assembly - 5-pin (F) connector to both a 27cm (10.6in) cable with a 3-pin (M) connector and a 27.2cm (10.7in) cable with a 2-pin (M) connector

Fuse  - Low voltage power supply fuse - For 110/120V operation

Cable  - Cable assembly - From DC controller board to main motor

Fuse  - Low voltage power supply fuse - For 220/240V operation

Clip  - Retainer clip - Keeps multipurpose/tray1 hinge in place - Black plastic clip for right side tray 1 hinge

Roller  - Multipurpose paper input tray feed roller

Bushing  - Transfer guide bushing

Guide  - Toner cartridge guide - Front guide - Plastic piece with slot to guide toner cartridge

Lever  - Paper sensing lever - Senses paper in face down delivery assembly

Power_Module  - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong)

Overlay  - Control panel overlay (Scandanavian)

Overlay  - Control panel overlay (German)

Overlay  - Control panel overlay (Dutch)

Overlay  - Control panel overlay (Japanese)

Overlay  - Control panel overlay (French)

Overlay  - Control panel overlay (Swedish)

Overlay  - Control panel overlay (Italian)

Overlay  - Control panel overlay (Spanish)

Overlay  - Control panel overlay (Portuguese)

Power_Cord  - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)

Overlay  - Control panel overlay (Danish)

Overlay  - Control panel overlay (Korean)

Cable  - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

Power_Cord  - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)

Roller  - Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it - Heavy media only

Overlay  - Control panel overlay (Finnish)

Overlay  - Control panel overlay (Turkish)

Power_Supply  - Low voltage power supply fuse - For 110/120V operation

Power_Module  - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)

Overlay  - Control panel overlay (Polish)

Roller  - Pickup roller assembly - Has attached Black plastic gear

Roller  - Feed/separation roller - Has a blue gear on one end and blue release tab on the other

Manual  - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)

Strap  - Support strap - Supports door when open

Arm  - Fusing sensor arm - Senses paper in Fuser Assembly

Cover  - Power switch cover - Has cutout for power switch

Latch  - Door latch insert (Black)

Arm  - Release arm for HP LaserJet 5Si Series

Lever  - Paper height lever - Senses when face-down tray is full

Lever  - Paper height lever - Senses when face-down tray is full

Lock  - Right Fuser Assembly lock - Locks fuser in place

Lock  - Left Fuser Assembly lock - Locks fuser in place

Flag  - Paper registration sensor flag

Label  - 2000 sheet paper tray cassette size label

Arm  - Registration paper sensor arm - Senses paper in registration assembly

Arm  - Paper input unit sensor arm - Senses when paper passes through paper input unit

Gear  - Gear - 20 tooth

LaserJet  - HP LaserJet 5Si HM Printer

Power_Supply  - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)

Transfer_Assembly  - Transfer assembly - Mounted on right side of 2000 sheet tray

Print_Server  - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

Manual  - Self paced training kit for LaserJet 5Si Series and 8000 Series - Includes PAL format video (VHS), and student guide

Service_Guide_PH  - HP LaserJet 5Si HM Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.