Part |
Description |
|
Print_Server - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
Business_InkJet - HP Business InkJet 2250TN Printer |
|
Print_Server - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
|
PC_Board - PCL5/PostScript 2 module |
|
PC_Board - PCL5/PostScript 2 module |
|
Printer - Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
|
Printer - Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
|
Carriage - Printhead carriage assembly - Includes carriage, carriage PC board, flex cables, line sensor, and carriage belt |
|
Upgrade_Kit - PCL5/PostScript 2 upgrade kit for HP 2200/2250 - Includes one PostScript 2 / PCL 5C upgrade module with integrated 96MHz processor and 16MB RAM |
|
Print_Server - Ethernet 10Base-T (RJ-45) EIO network internal print server PC board |
|
PC_Board - Main logic PC board |
|
PC_Board - Main Logic PC board |
|
Service_Station - Complete service station assembly - Includes the service station motor and wiper assembly |
|
Print_Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
Print_Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN |
|
Tray - HP Business InkJet 2200/2250 paper input tray 2 - Holds 250 sheets |
|
Tray - 250-sheet input tray - Tray 2 |
|
Tray - 250-sheet input tray - Tray 2 |
|
Memory - 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
|
Print_Server - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
|
Power_Supply - Power supply PCA - 100-240VAC, 50/60Hz, 68 watts - For worldwide use |
|
Print_Server - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector. |
|
Print_Server - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
Service_Station - Ink Supply Station assembly - Holds the ink cartridges and pumps ink out to the printheads - Includes the ink supply station motor |
|
Memory - 64MB, 100MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
|
Tray - Output tray assembly |
|
Feeder - Paper feed mechanism assembly - Feeds paper from tray two up into the printer |
|
Extender - EIO box assembly - Has expansion card slots |
|
Bracket - EIO box assembly - Has expansion card slots |
|
Pivot - Drive Roller and Pivot Assembly - Includes shaft with four rollers, drive gear, and pivot assembly |
|
Memory - 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
|
Chassis - Chassis assembly - Mounts to the base - Main mounting base for the rest of the print mechanism |
|
Printhead - No. 11 cyan ink printhead |
|
Printhead - No. 11 black ink printhead |
|
Printhead - No. 11 yellow ink printhead |
|
Printhead - No. 11 magenta ink printhead |
|
Motor - Carriage drive motor - Includes pulley |
|
Cartridge - HP 11 Standard Capacity Magenta Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
|
Cartridge - HP 11 Standard Capacity Cyan Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
|
Cartridge - HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
|
Cartridge - HP 11 Yellow Ink Cartridge - Prints approximately 1750 color graphics pages (North America) |
|
Latch - A-arm latch - Retains purple latch over the printheads on the carriage |
|
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
|
Keypad - Keypad PC board assembly |
|
Ink_System - Ink Delivery System assembly - Includes ink delivery tubes |
|
Belt - Carriage belt for HP DeskJet 2200 Series |
|
Separator - Separator assembly |
|
Return_Kit - Return kit - For returning defective Thermal InkJet (TIJ) 3.0 cartridges - Includes box and instructions |
|
Cover - Front panel cover assembly (Dark Gray) - Covers the front center of the printer - Includes buttons, LCD panel cover, access door sensor, and keypanel signal and power harnesses |
|
PC_Board - EIO extender board - Has two expansion connectors and plugs into the main logic board |
|
Door - Top/front main access door assembly |
|
Cable - Cable assembly with ferrites - Has many connectors: four 2-pin (F), five 3-pin (F), 3-pin (M), 5-pin (F), 6-pin (F), 7-pin (F), 9-pin (F), 10-pin (F), two 30-pin (F) - Overall length is 1.4m (4.5ft) |
|
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
|
Cover - Left side end cap - Covers the left side of the printer |
|
Sensor - Drive roller sensor PC board |
|
Roller - Pinch roller - Pinches the media against the drive rollers - Mounts in the rear paper guide |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) |
|
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
|
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
|
Tray - Input tray assembly - Pullout tray with paper length/width stop and fold down door |
|
Fan - Tubeaxial fan for HP DeskJet 2200 Series |
|
Plate - Carriage Plate Assembly - Support for the Carriage and Carriage Drive components |
|
Cover - Carriage access cover - Covers the carriage when parked and the ink supply station |
|
Base - Printer base - Covers bottom of the printer |
|
Motor - Paper motor assembly |
|
Guide - Upper/rear paper guide assembly - Includes upper and rear paper guides and the envelope switch |
|
Cable - Cable assembly - Large 10-pin (M) connector with 3 pins not used to both a 3-pin (F) connector and a 5-pin (F) connector with 1-pin not used - Overall length is 35.3cm (13.9in) |
|
Adjuster - Carriage shaft adjuster - Adjusts shaft alignment (Left) |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China) |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 240VAC in India) |
|
Lock - Carriage lock - Locks the carriage postion during servicing |
|
Bracket - Ground bracket for HP DeskJet 2200 Series |
|
Retainer - Carriage belt retainer |
|
Cover - Rear PC board cover - Covers the back of the printer |
|
Retainer - Retainer (Catwalk) - Holds the paper ejector bar |
|
Shield - Connector board shield |
|
Cover - EIO expansion slot cover |
|
Cover - Right side end cap - Covers the right side of the printer and the ink delivery system |
|
Wing - Right wing - Holds printed paper after being ejected |
|
Spring - Pinch spring - Attaches between the rear and upper paper guides |
|
Roller - Exit pinch roller - Pinches the media against the drive rollers - Mounts in the upper paper guide |
|
Cover - Keypanel cover - Covers the back side of the keypanel |
|
Cable - Cable assembly - 2-pin (M) connector to 4-pin (F) connector - 18cm (7in) long |
|
Sensor - Media sensor - Senses the presence of media |
|
Spring - Carriage belt spring |
|
Strip - Encoder strip - Used to determine carriage position |
|
Stop - Right Z stop assembly - Secures the right end of the drive shaft in the vertical direction |
|
Stop - Left Z stop assembly - Secures the left end of the drive shaft in the vertical direction |
|
Motor - Service station motor |
|
Absorber - Chimney absorber - Absorbs ink during the cleaning process |
|
Absorber - CYM absorber for HP DeskJet 2200 Series |
|
Absorber - Spit aerosol absorber - Absorbs ink mist during the cleaning process |
|
Plate - Side Plate Assembly - Mounts on the left side of the chassis - Secures the Input Gear Assembly |
|
Spring - Carriage lock spring |
|
Adjuster - Z-Axis service station alignment - Aligns the carriage when positioned in the service station |
|
Bracket - EIO bracket for HP DeskJet 2200 Series |
|
Spring - Encoder strip spring |
|
Retainer - Carriage shaft retainer - Metal spring which holds carriage shaft in place |
|
Retainer - Retainer ring for drive shaft |
|
Spring - Pinch roller spring - Puts tension on the pinch roller |
|
Hardware - Carriage shaft shim |
|
Ejector - Paper ejector - Ejects printed paper to the output tray |
|
Sensor - Access door sensor |
|
Cable - Cable assembly - 7-pin (M) connector to 7-pin (F) connector - 5.4cm (2.1in) long |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea) |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Australia and New Zealand) |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in Argentina) |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South Africa) |
|
Cover - Power supply cover - Covers part of the power supply board |
|
Shaft - Carriage shaft - Guides printer carriage |
|
Actuator - Ink supply door actuator - Activates the access door sensor |
|
Actuator - Top cover actuator - Activates the access door sensor |
|
Foot - Bumper foot - Replacement foot for the bottom of the printer |
|
Spring - X bias spring for HP Business InkJet 2280 Series |
|
Wing - Left wing - Holds printed paper after being ejected |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 100VAC in Japan) |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom) |
|
Idler - Idler system assembly - Keeps tension on the carriage belt |
|
Power_Cord - Power cord (Black) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Chile) |
|
Adjuster - Carriage shaft adjuster - Adjusts shaft alignment (Right) |
|
Sensor - Edge sensor for HP DeskJet 2200 Series |
|
Gear - Input gear assembly - Mounts on the left side of the printer - Transfers power to the drive roller |
|
Retainer - Encoder retainer (snubber) |
|
Spring - Z-stop spring - Pushes the Z-stop onto the drive shaft |
|
Print_Mechanism - Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
|
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
|
Print_Mechanism - Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
|
Cover - Rear PC board cover - Covers the back of the printer |
|
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
|
Arm_Tension - Tension arm - maintains tension on carriage belt |
|
Cable_Panel - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display. |
|
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
|
Carriage_Latch_Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
|
Clutch_Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
|
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Europe) |
|
Arm_Door - Carriage access door sensor arm |
|
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
|
Cable_Usb - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing. |
|
Control_Panel - Control panel assembly - control buttons and display on top front of the unit. |
|
Power_Supply_Board - High voltage power supply board |
|
Sensor_Spot - Spot sensor assembly is attached to the carriage assembly. |
|
Service_Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
|
Speaker - Speaker assembly - includes speaker cable. |
|
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
|
Service_Guide_PH - HP DeskJet 2250TN Printer Reference Guide - Contains information such as product information, operation overview, paper behavior, mainenance, ink safety, and removal / replacement of parts |
|
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
|
Display - Status led display (LCD display assembly). |
|
Encoder - Encoder spring - provides tension for encoder strip |
|
Extender_Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
|
Fan_PC_Board - Fan to cool power supply unit |
|
Ink_Supply_Station - Ink supply service station (iss) assembly |
|
Motor_Carriage - Carriage motor - motor that drives the carriage assembly |
|
Power_Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
|
Tray_Assembly - Paper input tray assembly for loading paper (bottom). |
|
Tray_Base - Tray base- bottom base of the paper input tray. |
|
Arm_Pick_Up - Paper detection arm - for registration plate on picking up paper |
|
Cover_Back - Back cover of printer, it is usually removed to clear paper jams. |
|
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Asia/Pacific) |
|
Paper - Media for HP C8136A |
|
Paper - Media for HP C8136A |
|
Formatter - Formatter board assembly |
|
Gear_Double - Transfer gear - has double gear attached on service station |
|
Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package |
|
Arm_Plate - Lever arm - used to lift the pressure plate lifter |
|
Arm_Sensing - Arm assembly senses paper in bottom tray |
|
Battery - Battery pack for hp printer |
|
Cable_Interface - Parallel cable - connects from your printer to computer via your parallel port. |
|
Cable_Mechanism - Cable assembly which connects the main logic board to the print mechanism |
|
Carriage_PC_Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
|
Door_Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
|
Fan_Vaccum - Vacuum fan assembly |
|
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs - |
|
Print_Server - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
Drive_Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
|
Duplexer - Auto duplexer assembly - provides double sided printing capability |
|
Gear_Cluster - Cluster gear, large gear on service station |
|
Window - Top/front access door assembly - print cartridge access door window. |
|
Belt_Duplex - Duplex timing belt - small belt that goes on the duplexer unit |
|
Cable_Carriage - Cable assembly which connects the main logic board to the carriage motor |
|
Carriage_Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
|
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
|
Power_Module_Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
|
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
|
Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
|
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
|
Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets |
|
Paper - Media for HP C6749A |
|
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
|
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
|
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
|
Paper - Media for HP C8952A |
|
Paper - Media for HP C6428A |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal) |
|
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Latin America) |
|
Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
|
Bracket_Right - Right bracket - carriage rod adjustment bracket (right) |
|
Feed_Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
|
Pad_Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing |
|
PC_Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
|
Rod_Carriage - Carriage rod - shaft that the carriage assembly rides on |
|
Spring_Compression - Compression spring - on pulley wedge, for carriage belt tension |
|
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
|
Paper - Media for HP C7791A |
|
Cover_Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
|
Encoder_Strip - Encoder strip - carriage position sensor reference |
|
Gear_Assembly - ADF gear assembly driven by ADF main motor |
|
PC_Board_DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
|
PC_Board_Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. |
|
Roller_Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
|
Sensor_Open - Door sensor assembly - open door sensor |
|
Tray_Assembly_Cover - Tray cover - the top cover for the paper pick up tray unit. |
|
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
|
Bracket_Left - Left bracket - carriage rod adjustment bracket (left) |
|
Bracket_Tension - Belt tension bracket - holds the carriage belt idler pulley |
|
Gear_Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
|
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
|
Print_Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
|
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 15 sheets |
|
Paper - Media for HP C5894A |
|
Paper - Media for HP C8244A |
|
Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes |
|
Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets |
|
Encoder_Disk - Disk encoder - helps to provide position information of the paper |
|
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
|
Power_Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
|
Power_Supply - Power supply board (internal pwr supply unit in the office machine). |
|
Sensor_Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
|
Paper - Media for HP C8136A |
|
Arm_Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
|
Carriage_Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
|
Carriage_Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
|
Extender_Output - Paper exit tray extension |
|
Flag_Paper - OOPS flag - out of paper sensor |
|
Sled_Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
|
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets |
|
Paper - Media for HP C8124A |
|
Paper - Media for HP C8121A |
|
Paper - Media for HP Q3434A |
|
Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package |
|
Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets |
|
Paper - Media for HP Q5761A |
|
NamePlate - Nameplate - DeskJet 2250 printer logo |
|
Belt_Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
|
Belt_Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
|
Front_Panel - Front panel assembly - includes lcd and actuator buttons |
|
Ink_Delivery_System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
|
Paper - Media for HP C8127A |
|
NamePlate - Nameplate - DeskJet 2200TN printer logo |
|
Carriage_Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
|
Pulley - Paper pick up tray motor pulley. |
|
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
|
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
|
Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes |
|
Carriage_Latch - A-arm latch - retains latch over the printheads on the carriage |
|
Carriage_Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
|
Cover_Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
|
Gear_Station - Gears on shaft of spittoon station |
|
Guide_Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
|
Roller_Exit - Paper exit rollers - out put assembly. |
|
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
|
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
|
Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches) |
|
Print_Server - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
|
Paper - Media for HP C5894A |
|
AC_Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
|
Cap_Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
|
Carriage_Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
|
Door_Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
|
Door_Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
|
Motor_Service_Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
|
Sensor_Exit - Exit media sensor sv |
|
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
