Part |
Description |
|
Print_Server - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
Print_Server - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
|
Printer - Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
|
Printer - Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
|
Carriage - Printhead carriage assembly - Includes carriage, carriage PC board, flex cables, line sensor, and carriage belt |
|
Upgrade_Kit - PCL5/PostScript 2 upgrade kit for HP 2200/2250 - Includes one PostScript 2 / PCL 5C upgrade module with integrated 96MHz processor and 16MB RAM |
|
Print_Server - Ethernet 10Base-T (RJ-45) EIO network internal print server PC board |
|
Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
PC_Board - Main Logic PC board |
|
PC_Board - Main logic PC board |
|
Service_Station - Complete service station assembly - Includes the service station motor and wiper assembly |
|
Print_Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
Print_Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN |
|
Tray - HP Business InkJet 2200/2250 paper input tray 2 - Holds 250 sheets |
|
Tray - 250-sheet input tray - Tray 2 |
|
Tray - 250-sheet input tray - Tray 2 |
|
Print_Server - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
Memory - 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
|
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
|
Print_Server - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
|
Power_Supply - Power supply PCA - 100-240VAC, 50/60Hz, 68 watts - For worldwide use |
|
Print_Server - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector. |
|
Print_Server - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
Service_Station - Ink Supply Station assembly - Holds the ink cartridges and pumps ink out to the printheads - Includes the ink supply station motor |
|
Memory - 64MB, 100MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
|
Tray - Output tray assembly |
|
Extender - EIO box assembly - Has expansion card slots |
|
Bracket - EIO box assembly - Has expansion card slots |
|
Pivot - Drive Roller and Pivot Assembly - Includes shaft with four rollers, drive gear, and pivot assembly |
|
Memory - 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
|
Chassis - Chassis assembly - Mounts to the base - Main mounting base for the rest of the print mechanism |
|
Printhead - No. 11 black ink printhead |
|
Printhead - No. 11 yellow ink printhead |
|
Printhead - No. 11 magenta ink printhead |
|
Printhead - No. 11 cyan ink printhead |
|
Motor - Carriage drive motor - Includes pulley |
|
Cartridge - HP 11 Standard Capacity Cyan Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
|
Cartridge - HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
|
Cartridge - HP 11 Yellow Ink Cartridge - Prints approximately 1750 color graphics pages (North America) |
|
Cartridge - HP 11 Standard Capacity Magenta Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
|
Latch - A-arm latch - Retains purple latch over the printheads on the carriage |
|
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
|
Keypad - Keypad PC board assembly |
|
Ink_System - Ink Delivery System assembly - Includes ink delivery tubes |
|
Belt - Carriage belt for HP DeskJet 2200 Series |
|
Separator - Separator assembly |
|
Return_Kit - Return kit - For returning defective Thermal InkJet (TIJ) 3.0 cartridges - Includes box and instructions |
|
Cover - Front panel cover assembly (Dark Gray) - Covers the front center of the printer - Includes buttons, LCD panel cover, access door sensor, and keypanel signal and power harnesses |
|
PC_Board - EIO extender board - Has two expansion connectors and plugs into the main logic board |
|
Door - Top/front main access door assembly |
|
Cable - Cable assembly with ferrites - Has many connectors: four 2-pin (F), five 3-pin (F), 3-pin (M), 5-pin (F), 6-pin (F), 7-pin (F), 9-pin (F), 10-pin (F), two 30-pin (F) - Overall length is 1.4m (4.5ft) |
|
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
|
Cover - Left side end cap - Covers the left side of the printer |
|
Sensor - Drive roller sensor PC board |
|
Roller - Pinch roller - Pinches the media against the drive rollers - Mounts in the rear paper guide |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) |
|
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
|
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
|
Tray - Input tray assembly - Pullout tray with paper length/width stop and fold down door |
|
Fan - Tubeaxial fan for HP DeskJet 2200 Series |
|
Plate - Carriage Plate Assembly - Support for the Carriage and Carriage Drive components |
|
Cover - Carriage access cover - Covers the carriage when parked and the ink supply station |
|
Base - Printer base - Covers bottom of the printer |
|
Motor - Paper motor assembly |
|
Guide - Upper/rear paper guide assembly - Includes upper and rear paper guides and the envelope switch |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea) |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Australia and New Zealand) |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in Argentina) |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South Africa) |
|
Ejector - Paper ejector - Ejects printed paper to the output tray |
|
Spring - Z-stop spring - Pushes the Z-stop onto the drive shaft |
|
Shaft - Carriage shaft - Guides printer carriage |
|
Adjuster - Carriage shaft adjuster - Adjusts shaft alignment (Right) |
|
Actuator - Ink supply door actuator - Activates the access door sensor |
|
Actuator - Top cover actuator - Activates the access door sensor |
|
Foot - Bumper foot - Replacement foot for the bottom of the printer |
|
Absorber - Chimney absorber - Absorbs ink during the cleaning process |
|
Spring - Pinch spring - Attaches between the rear and upper paper guides |
|
Roller - Exit pinch roller - Pinches the media against the drive rollers - Mounts in the upper paper guide |
|
Cover - Right side end cap - Covers the right side of the printer and the ink delivery system |
|
Retainer - Encoder retainer (snubber) |
|
Spring - Carriage lock spring |
|
Adjuster - Z-Axis service station alignment - Aligns the carriage when positioned in the service station |
|
Wing - Left wing - Holds printed paper after being ejected |
|
Spring - Encoder strip spring |
|
Cover - Keypanel cover - Covers the back side of the keypanel |
|
Cable - Cable assembly - 2-pin (M) connector to 4-pin (F) connector - 18cm (7in) long |
|
Sensor - Media sensor - Senses the presence of media |
|
Spring - X bias spring for HP Business InkJet 2280 Series |
|
Shield - Connector board shield |
|
Cover - Rear PC board cover - Covers the back of the printer |
|
Motor - Service station motor |
|
Retainer - Carriage belt retainer |
|
Absorber - CYM absorber for HP DeskJet 2200 Series |
|
Absorber - Spit aerosol absorber - Absorbs ink mist during the cleaning process |
|
Plate - Side Plate Assembly - Mounts on the left side of the chassis - Secures the Input Gear Assembly |
|
Cover - Power supply cover - Covers part of the power supply board |
|
Retainer - Retainer ring for drive shaft |
|
Spring - Pinch roller spring - Puts tension on the pinch roller |
|
Hardware - Carriage shaft shim |
|
Sensor - Access door sensor |
|
Cable - Cable assembly - 7-pin (M) connector to 7-pin (F) connector - 5.4cm (2.1in) long |
|
Power_Cord - Power cord (Black) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Chile) |
|
Retainer - Retainer (Catwalk) - Holds the paper ejector bar |
|
Spring - Carriage belt spring |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 100VAC in Japan) |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom) |
|
Idler - Idler system assembly - Keeps tension on the carriage belt |
|
Retainer - Carriage shaft retainer - Metal spring which holds carriage shaft in place |
|
Strip - Encoder strip - Used to determine carriage position |
|
Stop - Right Z stop assembly - Secures the right end of the drive shaft in the vertical direction |
|
Stop - Left Z stop assembly - Secures the left end of the drive shaft in the vertical direction |
|
Adjuster - Carriage shaft adjuster - Adjusts shaft alignment (Left) |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China) |
|
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 240VAC in India) |
|
Lock - Carriage lock - Locks the carriage postion during servicing |
|
Bracket - Ground bracket for HP DeskJet 2200 Series |
|
Cover - EIO expansion slot cover |
|
Wing - Right wing - Holds printed paper after being ejected |
|
Sensor - Edge sensor for HP DeskJet 2200 Series |
|
Gear - Input gear assembly - Mounts on the left side of the printer - Transfers power to the drive roller |
|
Bracket - EIO bracket for HP DeskJet 2200 Series |
|
Cover - Rear PC board cover - Covers the back of the printer |
|
Print_Mechanism - Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
|
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
|
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
|
Print_Mechanism - Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
|
Arm_Plate - Lever arm - used to lift the pressure plate lifter |
|
Arm_Tension - Tension arm - maintains tension on carriage belt |
|
Clutch_Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
|
Cover_Back - Back cover of printer, it is usually removed to clear paper jams. |
|
Gear_Station - Gears on shaft of spittoon station |
|
Print_Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
|
Roller_Exit - Paper exit rollers - out put assembly. |
|
Sensor_Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
|
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
|
Tray_Base - Tray base- bottom base of the paper input tray. |
|
Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets |
|
Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets |
|
NamePlate - Nameplate - DeskJet 2200TN printer logo |
|
NamePlate - Nameplate - DeskJet 2200 printer logo |
|
Door_Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
|
Formatter - Formatter board assembly |
|
Front_Panel - Front panel assembly - includes lcd and actuator buttons |
|
Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes |
|
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
|
Paper - Media for HP C5894A |
|
Paper - Media for HP C5894A |
|
Cover_Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
|
Ink_Delivery_System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
|
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
|
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
|
Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package |
|
Carriage_Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
|
Fan_PC_Board - Fan to cool power supply unit |
|
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs - |
|
Pulley - Paper pick up tray motor pulley. |
|
Sensor_Exit - Exit media sensor sv |
|
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
|
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
|
Paper - Media for HP C8121A |
|
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
|
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
|
Door_Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
|
Gear_Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
|
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
|
Roller_Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
|
Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches) |
|
Print_Server - JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
|
Paper - Media for HP C8136A |
|
Paper - Media for HP C7791A |
|
Paper - Media for HP C8244A |
|
Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes |
|
Print_Server - JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
Service_Guide_PH - HP DeskJet 2200se Printer Reference Guide - Contains information such as product information, operation overview, paper behavior, mainenance, ink safety, and removal / replacement of parts |
|
Belt_Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
|
Bracket_Right - Right bracket - carriage rod adjustment bracket (right) |
|
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
|
Carriage_Latch - A-arm latch - retains latch over the printheads on the carriage |
|
Extender_Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
|
Extender_Output - Paper exit tray extension |
|
Service_Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
|
Tray_Assembly - Paper input tray assembly for loading paper (bottom). |
|
Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets |
|
Paper - Media for HP C6749A |
|
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
|
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
|
Gear_Assembly - ADF gear assembly driven by ADF main motor |
|
PC_Board_Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. |
|
Sensor_Spot - Spot sensor assembly is attached to the carriage assembly. |
|
Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
|
Belt_Duplex - Duplex timing belt - small belt that goes on the duplexer unit |
|
Cap_Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
|
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
|
Flag_Paper - OOPS flag - out of paper sensor |
|
Power_Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Latin America) |
|
Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package |
|
Paper - Media for HP C8127A |
|
Paper - Media for HP C8136A |
|
AC_Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
|
Arm_Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
|
Arm_Pick_Up - Paper detection arm - for registration plate on picking up paper |
|
Battery - Battery pack for hp printer |
|
Cable_Mechanism - Cable assembly which connects the main logic board to the print mechanism |
|
Carriage_Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
|
Drive_Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
|
Encoder_Disk - Disk encoder - helps to provide position information of the paper |
|
Gear_Double - Transfer gear - has double gear attached on service station |
|
Motor_Carriage - Carriage motor - motor that drives the carriage assembly |
|
Power_Supply - Power supply board (internal pwr supply unit in the office machine). |
|
Sensor_Open - Door sensor assembly - open door sensor |
|
Power_Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal) |
|
Cable_Usb - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing. |
|
Power_Module_Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Asia/Pacific) |
|
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 15 sheets |
|
Paper - Media for HP C8952A |
|
DeskJet - DeskJet 2200se Printer |
|
Arm_Door - Carriage access door sensor arm |
|
Belt_Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
|
Cable_Interface - Parallel cable - connects from your printer to computer via your parallel port. |
|
Carriage_Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
|
Display - Status led display (LCD display assembly). |
|
Motor_Service_Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
|
Pad_Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing |
|
PC_Board_DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
|
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
|
Spring_Compression - Compression spring - on pulley wedge, for carriage belt tension |
|
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
|
Cable_Carriage - Cable assembly which connects the main logic board to the carriage motor |
|
Cable_Panel - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display. |
|
Carriage_Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
|
Carriage_Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
|
Carriage_Latch_Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
|
Power_Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
|
Sled_Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
|
Window - Top/front access door assembly - print cartridge access door window. |
|
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
|
Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
|
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
|
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
|
Paper - Media for HP C8136A |
|
Paper - Media for HP C6428A |
|
Bracket_Left - Left bracket - carriage rod adjustment bracket (left) |
|
Carriage_Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
|
Feed_Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
|
PC_Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
|
Power_Supply_Board - High voltage power supply board |
|
Arm_Sensing - Arm assembly senses paper in bottom tray |
|
Carriage_PC_Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
|
Control_Panel - Control panel assembly - control buttons and display on top front of the unit. |
|
Encoder - Encoder spring - provides tension for encoder strip |
|
Encoder_Strip - Encoder strip - carriage position sensor reference |
|
Guide_Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
|
Rod_Carriage - Carriage rod - shaft that the carriage assembly rides on |
|
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
|
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28cc's of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
|
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets |
|
Paper - Media for HP Q3434A |
|
Paper - Media for HP Q5761A |
|
Bracket_Tension - Belt tension bracket - holds the carriage belt idler pulley |
|
Duplexer - Auto duplexer assembly - provides double sided printing capability |
|
Fan_Vaccum - Vacuum fan assembly |
|
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
|
Paper - Media for HP C8124A |
|
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Europe) |
|
Cover_Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
|
Door_Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
|
Gear_Cluster - Cluster gear, large gear on service station |
|
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
|
Ink_Supply_Station - Ink supply service station (iss) assembly |
|
Speaker - Speaker assembly - includes speaker cable. |
|
Tray_Assembly_Cover - Tray cover - the top cover for the paper pick up tray unit. |
